Development of Fast-Response Portable NDIR Analyzer Using Semiconductor Devices

  • Kim, Woo-Seok (Thermo Mechanical Properties Lab. Engineering Building East AJOU Univ.) ;
  • Lee, Jong-Hwa (Thermo Mechanical Properties Lab. Engineering Building East AJOU Univ.) ;
  • Park, Young-Moo (Thermo Mechanical Properties Lab. Engineering Building East AJOU Univ.) ;
  • Yoo, Jai-Suk (Thermo Mechanical Properties Lab. Engineering Building East AJOU Univ.) ;
  • Park, Kyoung-Seok (School of Mechanical Engineering Kumoh National University)
  • 발행 : 2003.12.01

초록

In this paper, a novel fast response NDIR analyzer (FRNDIR), which uses an electrically pulsed semiconductor emitter and dual type PbSe detector for the PPM-level detection of carbon dioxide (CO$_2$) at a wavelength of 4.28 $\mu\textrm{m}$, is described. Modulation of conventional NDIR energy typically occurs at 1 to 20 Hz. To achieve real time high-speed measurement, the new analyzer employs a semiconductor light emitter that can be modulated by electrical chopping. Updated measurements are obtained every one millisecond. The detector has two independent lead selenide (PbSe) with IR band pass filters. Both the emitter accuracy and the detector sensitivity are increased by thermoelectric cooling of up to -20 degrees C in all semiconductor devices. Here we report the use of semiconductor devices to achieve improved performance such that these devices have potential application to CO$_2$ gas measurement and, in particular, the measurement of fast response CO$_2$ concentration at millisecond level.

키워드

참고문헌

  1. Bode, D. E., Johnson, T. H. and Mclean, B. N., 1965, 'Lead Selenide Detector for Intermediate Temperature Operation,' The Optical Society of America, Vol. 4, No.3, pp. 327-331
  2. Collings, N. and Willey, J., 1987, 'Cyclically Resolved HC Emissions from a Spark Ignition Engine,' SAE 871619
  3. Govind, P. Agrawal, 2002, 'Fiber-Optic Communication Systems,' John Wiley & Sons, Inc., New York, pp.92-93
  4. Johnson, T. H., Cozine, H. T. and Mclean, B. N., 1965, 'Lead Selenide Detectors for Ambient Temperature Operation,' The Optical Society of America, Vol. 4, No.6, pp. 693-696
  5. Kimio Miyatake, Kozo Ishida, Hiroji Kohsaka, and Neal Harvey, 1990, 'Fast Response NDIR for Real-Time Exhaust Measurement,' SAE 900501
  6. Matthew, J. Hall and Patrick Zuzek, 2000, 'Fiber Optic Sensor for Time-Resolved Measurements of Exhaust Gas Recirculation in Engines,' SAE 2000-01-2865
  7. Peckham, M. et al., 1998, 'Real Time Incylinder and Exhaust NO Measurements in Production SI Engine,' SAE 980400
  8. Reavell, K., Collings, N., Peckham, M. and Hands, T., 1997, 'Simultaneous Fast Response NO and HC Measurements from a Spark Ignition Engine,' SAE 971610
  9. Robert, M. Green, 2000, 'Measuring the Cylinder-to-Cylinder EGR Distribution in the intake of Diesel Engine During Transient Operation,' SAE 2000-01-2866
  10. Sutela, C., Collings, N. and Hands, T., 1999, 'Fast Response $CO_2$ Sensor for Automotive Exhaust Gas Analysis,' SAE 1999-01-3477
  11. Sutela, C., Collings, N. and Hands, T., 2000, 'Real Time $CO_2$ Measurement to Determine Transient Intake Gas Composition under EGR Conditions,' SAE 2000-01-2953
  12. Vincent, J. D., 1990 'Fundamentals of Infrared Detector Operation and Testing. Santa Barbara Research Center,' pp. 32 - 36