Journal of Advanced Marine Engineering and Technology

  • 제27권6호
  • /
  • Pages.728-735
  • /
  • 2003
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지

$2mm^t$ 알루미늄합금재의 겹치기이음을 위한 마찰교반용접의 실험적 연구

An Experimental Study on Lap Joint using FSW with $2mm^t$ Aluminum Alloy Plate

  • 장석기 (목포해양대학교 기관시스템공학부)
  • 발행 : 2003.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper shows the possibility of performing Lap joint using the friction stir welding with $2mm^t$ aluminum alloy plate and the determination of tool-dimensions for FSW in milling machine. This research also is reported on obtaining the tensile-shear strength, 91.3 (MPa) and the energy absorption, 26.3 (J) for Lap jointed specimen. The optimal tool-dimensions and method for Lap joint using FSW is as follows; each diameter of shoulder and pin is $9\phi(mm) and 3\phi(mm)$, the length of pin is 3.6(mm), Pressing the shoulder of tool into original base metal is not reasonable.

키워드

참고문헌

  1. Welding Handbook Eighth Edition American Welding Society
  2. TWI Bulletin Friction Surfacing Tomorrow - Industrial Applications of Cladding Andrews,D.
  3. International Patent Application No. PCT/GB 92/02203 and GB patent application No 9125978.8 Friction Stir Butt Welding Thomas,W.M.(et al.)
  4. Welding Journal v.75 no.3 Friction Stir Process Welds Aluminum Alloys Dawes,C.J.
  5. Svetsaren no.3 Welding Method for Aluminum Hinrichs,J.F.;Noruk,J.S.;McDonald,W.M.;Heideman,R.J.
  6. Welding Journal v.76 no.9 Friction Stir Welding Process Goes Commercial Knipstrom,K.E.
  7. Proc. of 4th Int. Conf. on Aluminum Alloys(ICAA4) Material Flow Behaviour and Micro-structural Integrity of Friction Stir Butt Weldments Midling,O.T.
  8. Journal of The Korean Society of marine Engineers v.25 no.4 A Development of Optimizing Tools for Friction Stir Welding with 2mm Thick Aluminum Alloy using a Milling Machine S.K.Jang;S.H.Shin