표면압력이 상호 간섭되는 슬릿을 가진 원주의 후류 유동 특성

The Flow Characteristics around Circular Cylinder of Pressure Interference with Slits

  • 부정숙 (부산대학교 기계공학부 기계기술연구소) ;
  • 김진석 (대림기업(주)) ;
  • 류병남 (부산대학교 기계기술연구소)
  • 발행 : 2003.09.01

초록

This study is conducted to investigate aerodynamic forces and wake structures about the pressure interference of a circular cylinder with slits. An experimental investigation of a circular cylinder with slits is carried out in uniform flow in the range of Reynolds number from 8,000 to 32,000 using X-type hot wire. Flow visualization is executed by smoke-wire method to understand the mechanism of these vortex formation process. Inspection in the wake at X/D=5.5 of the cylinder with the slits suggested that a strong vortex-shedding pattern for these cylinders is revealed compare with a circular cylinder without slits. It is found that the rolling up position of shear layer of the cylinder with slits is shorten compare with a circular cylinder without slits.

키워드

참고문헌

  1. Journal of Wind Engineering and Industrial Aerodynamics v.86 Vortex shedding behind modified circular cylinders J.F.Olsen;S.Rajagopalan https://doi.org/10.1016/S0167-6105(00)00003-9
  2. Fluid Dynamics Research v.18 A note on the drag reduction on a circular cylinder due to double rows of holes Y.Yajima;O.Sano https://doi.org/10.1016/0169-5983(96)00015-9
  3. Applied Scientific Research no.51 Vortex shedding from a circular cylinder with a slit and concave rear surface C.O.Popiel.;D.I.Robinson.;J.T.Turner.
  4. JSME International Journal Series II v.36 no.1 The Aerodynamic Characteristics of a Circular Cylinder with Trangential Blowing in Uniform Shear Flows T.Hayashi;F.Yoshino;R.Waka https://doi.org/10.1299/jsmeb.36.101
  5. 대한기계학회논문집 v.17 no.11 Flow Characteri stics of the wake behind a square prism by controlling the separated shear layer 부정숙;양종필;정양범
  6. Experiments in Fluids no.23 Effects of a splitter plate on the near wake of a circular cylinder in 2 and 3-dimensional flow configurations E.A.Anderson.;A.A.Szewczyk.
  7. J. Fluid Mech. v.21 Investigation of the flow behind a two-dimensional model with a blunt trailing edge and fitted with splitter plates P.W.Berman https://doi.org/10.1017/S0022112065000162