2차원 직사각형 덕트 내부에 돌기부를 갖는 흐름의 동결특성에 관한 연구

Freezing Characteristics in a Horizontal Rectangular Channel with the Two-Dimensional Protuberances

  • 오철 (한국해양대학교 기관시스템공학부)
  • 발행 : 2003.09.01

초록

Freezing of turbulent water flow between two horizontal cooled parallel plates with the separated region has been investigated experimentally. The flow separation was induced by vertical plates (two-dimensional plates) situated at the inlet of the rectangular channel. The degree of flow separation was varied by employing vertical thin plates with various heights. Three kinds of the vertical plates with 8.0, 9.8 and 12.5 mm in height were utilized. The Reynolds number and cooling temperature ratio were ranged from $3.45\times10^3 to 1.73\times10^4$ and 7.0 to 20.0 respectively, The measurements show that the flow separation influenced remarkably on the local ice formation characteristics. The location of the first ice layer and the average heat transfer at the ice surface were found be correlated as a function of the Reynolds number, the cooling temperature ratio, and the orifice height ratio.

키워드

참고문헌

  1. Int. J. Heat Mass Trans. v.22 no.10 The steady state ice layer profile on a constant temperature plate in a forced convection flowlaminar regime T.Hirata (외 3명)
  2. Int. J. Heat Mass Trans. v.20 no.16 The effect of dendritic ice formation in water pipes Gilpin,R.R.
  3. Trans. ASME. J. Heat Trans. v.103 no.2 Ice formation in a pipe containing flow in the transition and turbulent regimes Gilpin,R.R.
  4. 일본기계학회논문집 (B편) v.49 no.446 冷却平行平板を流れる水の非定常凍結 關 (외 4명)
  5. Trans. ASME, J. Heat Trans v.106 Transition Phenomena of ice formation in water flow between two horizontal parallel plates Seki,N.(외 2명)