대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제27권7호
  • /
  • Pages.1076-1086
  • /
  • 2003
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

금속 분말의 고무 등가압 성형과 냉간 정수압 성형

Rubber Isostatic Pressing and Cold Isostatic Pressing of Metal Powder

  • 김종광 (포항공과대학교 대학원 기계공학과) ;
  • 양훈철 (포항공과대학교 대학원 기계공학과) ;
  • 김기태 (포항공과대학교 기계공학과)
  • 발행 : 2003.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of a rubber mould on densification behavior of aluminum alloy powder was investigated under cold isostatic compaction. A thickness of rubber mould and friction effect between die wall and rubber mould were also studied. The hyperelastic constitutive equation based on the Ogden strain energy potential was employed to analyze deformation of rubber. The elastoplastic constitutive equation of Shima and Oyane and that of Lee on densification were implemented into a finite element program (ABAQUS) to simulate densification of metal powder for cold isostatic pressing and rubber isostatic pressing. Finite element results were compared with experimental data for densification and deformation of aluminum alloy powder under isostatic compaction.

키워드

참고문헌

  1. German, R. M., 1984, Powder Metallurgy Science, Metal Powder Industries Federation, Princeton, New Jersey, USA
  2. Kuhn, H. A. and Ferguson, B. L., 1990, Powder Forging, Metal Powder Industries Federation, Princeton, New Jersey, USA
  3. Froes, F. H. et al., 1993, Light Material for Transportation system, Kim, N. J. Ed., Postech, Pohang, Korea, p. 27
  4. Ashely, S., 1991, 'Powder-Metal Forging : Connecting Rods That Crack by Desing,' Vol. 113, No. 2, p. 54
  5. German, R. M., 1990, Powder Injection Moulding, Metal Powder Industries Federation
  6. Bocchini, G. F., 1999, 'Warm Compaction of Metal Powder : Why It Works, Why It Requires a Sophisticated Enginerring Approach,' Powder Metal., Vol. 42, No. 2, pp. 171-180 https://doi.org/10.1179/003258999665530
  7. Sagawa, M., Nagata, H., Watanabe, T. and Itatani, O., 2000, 'Rubber Isostatic Pressing (RIP) of Powder for Magnets and Other Materials,' Materials and Design, Vol. 21, pp. 243-249 https://doi.org/10.1016/S0261-3069(99)00084-9
  8. Shima, S., Sakamoto Y. and Kotera, H. 2001, 'Simulation of Rubber Isostatic Pressing (RIP),' Recent Developments in Computer Modeling of Powder Metallurgy Process. IOS press, pp. 217-227
  9. Peng, S. H. and Chang, W. V., 'A Compressible Approach in Finite Element Analysis of Rubber Elastic Materials,' Comp.& stru., Vol. 62, pp. 573-593 https://doi.org/10.1016/S0045-7949(96)00195-2
  10. Kim, H. G., Lee, J. W. and Kim, K. T., 2001, 'The Effect of a Rubber Mould on Densification and Deformation of Metal Powder Compact during Cold Isostatic Pressing,' Mat. Sci. Eng. A318, pp. 174-182
  11. Yang, H. C., Lee, J. W. and Kim, K. T., 2001, 'The Effect of a Rubber Mould on Densification and Deformation of Metal Powder during Warm Isostatic Pressing,' EURO PM2001, Vol. 3, pp. 172-177
  12. Ogden, R. W., 1984, Non-linear Elastic Deformation, Wiley, New York
  13. ABAQUS User's I, II and III Manual, 2001, Ver. 6.2, H.D. Hibbitt, I. Karlsson and E.P. Sorenson, USA
  14. Yeoh, O. H., 1994, 'Some Forms of the Strain Energy Function for Rubber,' Rubber Chern. Tech. Vol. 67, pp. 481-503 https://doi.org/10.5254/1.3538686
  15. Lee, S. C. and Kim, K. T., 2002, 'Densification Behavior of Aluminum Alloy Powder under Cold Compaction,' Int. J. Mech. Sci., Vol. 44, pp. 1295-1308 https://doi.org/10.1016/S0020-7403(02)00003-6
  16. Shima, S. and Oyane, M., 1976, 'Plasticity Theory for Porous Metals,' Int. J. Mech. Sci., Vol. 18, pp. 285-291 https://doi.org/10.1016/0020-7403(76)90030-8
  17. Boyer, H. E., 1987, 'Hardness Testing,' ASM International
  18. Abe, O., Kanzaki, S. Ohashi, M., Tabata, H., 1987, Sintering 87 Proceedings of the international institute for the Science of Sintering Symposium, Tokyo, Japan
  19. Anil, K. Bhowmick and Howard L. Stephen, 1988, Handbook of elastomers new developments and technology, New York, M. Dekker, pp. 475-481
  20. Shin, S. J., Lee, T. S. and Oh, S. I., 1998, 'Threedimensional Finite Element Analysis of Rubber Pad Deformation-Part I: Development of Implicit and Explicit Methods,' Transactions of the KSME, A, Vol. 22, No. 1, pp. 111-120
  21. Shin, S. J., Lee, T. S. and Oh, S. I., 1998, 'Three-dimensional Finite Element Analysis of Rubber Pad Deformation- Part II: Applications,' Transactions of the KSME, A, Vol. 22, No. 1, pp.121-131