Development of Effective Measurement Method for Burr Geometry

효율적인 버 형상 측정방법 개발

  • 고성림 (건국대학교 기계설계학과) ;
  • 김원섭 (건국대학교 대학원 기계설계학과)
  • Published : 2003.06.01

Abstract

Triangulation method, conoscopic holography method and interferometry method are analyzed for effective measurement of micro burr geometry, which is formed in micro drilling. To select proper sensor, the cross section of a cylinder with 0.5mm diameter is measured and the result shows that conoscopic holography method is effective for measuring highly inclined surface in cylinder. Burrs with 1.0mm and 30${\mu}{\textrm}{m}$ height are measured by three suggested methods. As a result, the conoscopic holography method is proved to be most proper in measuring burr geometry. Burr measurement system is developed, which consists of conoscopic laser sensor, X-Y table, controller and burr measurement program. Burrs can be measured automatically and the result is displayed in 3D shape

Keywords

References

  1. Ko, Sung-Lim, 'Development of Burr Measurement System using Laser and It's Application,' Proceedings of 6th Int. Conference in Precision Surface Finishing and Deburring Tehcnology, St.Petersburg, Russia, pp. 101-123, Sep. 5-7, 2000
  2. Hecht, 'Optics,' Addison-wesley
  3. Keyence Sensors Catalog
  4. Intek Plus Accura manual
  5. Choi, E. B., 'Measurement of 3D Micro Geometry using Moire Topography,' Korea Advanced Institute of Science and Technology (KAIST), PhD. Dissertation, 1998
  6. Lonardo, P. M., Lucca, D. A. and Chiffre, K. De, 'Emerging Trend in Surface Metrology,' Annals of the CIRP, Vol. 51, 2002. 2 https://doi.org/10.1016/S0007-8506(07)61708-9
  7. Sirat, G. Y., 'Conoscopic holography,' SPIE, Vol. 523 Application of holography, 1985