References
- 17th Leeds-Lyon Symposium Mixed Lubrication of a Cam and Flat Faced Follwer Proceedings D.Dowson;C.M.Tayler;G.Zhu
- ASME Journal of Lubrication Technology v.100 no.1 An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Pertial Hydrodynamics Lubrication N.Patir;H.S.Cheng
- ASME Journal of Lubrication Technology v.121 no.2 Application of Average Flow Model to Lubrication Between Rough Sliding Surface N.Patir;H.S.Cheng
- SAE 830165 An Analysis of Valve Train Friction in Terms of Lubrication Principles J.T.Staron;P.A.Willermet
- 서울대학교 대학원 공학박사학위논문 축방향 하중과 토오크를 고려한 회전축의 휨 진동 해석 홍장표
- SAE 850441 Dynamic Friction in Cam/Tappet Lubrication A.K. Van Helden;R.J. Van der Meer;J.J. Van Staaden;E. Van Gelderen
- Proc. Instn. Mech. Engrs. v.185 The Contact of Two Nominally Flat Rough Surface J.A.Greenwood;J.H.Tripp
- Tribology International Prictical Determination and Use of Bearing Dynamic Coefficients J.Glienicke;D.C.Han;M.Leonhard
- J. of Eng. for Industry, Trans. ASME The Effect of Support Flexibility and Damping on the Synchronous Response of a Single-Mass Flexible Rotor R.G.Kirk;E.J.Gunter
- Computer & Structure v.23 no.4 A New Transfer Matrix Method for Response Analysis of Large Dynamic Systems A.S.Kumar;T.S.Sanker
- International Journal of Rotating Machinery v.1 no.3-4 Analysis of Vibration Characteristics for a Rotor-Bearing System Using Distributed Spring and Damper Model D.C.Han;S.H.Choi;Y.H.Lee