The Effect of Long Term Thermal Aging on High Temperature Mechanical Properties in STS316

장시간 시효처리가 316 스트인리스 강의 고온 기계적 성질에 미치는 영향

  • Published : 2002.03.01

Abstract

At elevated temperature, very complex precipitations occur in STS316. To investigate the effect of the precipitation on mechanical properties in SIS316, tensile tests and fatigue crack growth tests were carried out at $650^{\circ}C$ using artificially degraded materials. The material degradation was simulated by aging for up to 20000 hrs. at $750^{\circ}C$, which is equal to 179000hrs (about 20yrs) of service life at $650^{\circ}C$, after conducting solution treatment for 20 min. at $11300^{\circ}C$. The result of the hardness test and the tensile test showed that both properties are closely related to the mean free distance of carbides. Also, from the results of fracture tests at $650^{\circ}C$, ${\triangle}K_{th}$, after values were found to decrease as aging time and microstructure, as the volume fraction of $\sigma$ phase increased.

Keywords

References

  1. 김응서 외 공역, 자동차 기술 핸드북, 한국자동차공학회, Vol.4, pp.8-12, 1996
  2. J. W. Im, S. J. Won, M. J. Kim, B. S. Lim, Creep-Fatigue Crack Growth and Creep Rupture Behavior in Type 316 Stainless Steels Effect of Hold time and Aging Treatment,' International Journal of Automotive Technology, Vol.1, No.2,pp.71-77, 2000
  3. 서창민, 허정훈, 남승훈, '시효열화시킨 lCr-lMo-0.25V강의 고온하의 회전 굽힘 피로강도에 관한 연구,' 대한기계학회논문집, 제20권 제9호,pp.2819-2832, 1996
  4. 정희돈, '2.25Cr-1Mo강의 열화와 기계적 성질변화에 관한 연구,' 대한기계학회 논문집, 제20권 제5호,pp.1372-1381, 1996
  5. J. H. Bulloch, 'Near Threshold Fatigue Crack Propagation Behaviour of CrMoV Turbine steel,' theoretical and Applied Fracture Mechanics, Vol. 23,pp.89-101, 1992 https://doi.org/10.1016/0167-8442(95)00007-2
  6. 권재도, '장기사용 Cr-Mo강 열화 재의 파괴인성 평가와 수명예측,' 대한기계학회 논문집 제16권, pp. 1421-1428, 1992
  7. A. M. Abdel-Latif, J. M. Corbett, D. Siedy, D. M. R. Taplin, 'Effect of Microstructural Degradation on Creep Life Prediction of 2.25Cr-1Mo Steel,' Fifth Canadian Conference on Fracture, pp.1631-1620,1981
  8. 윤기봉, 윤석호, 김승태, 서창민, 남승훈, '시효열화시킨 1Cr-1Mo-0.25V 강의 고온에서의 JIC 및 Tmat의 평가,' 대한기계학회논문집, 제18권 제11호,pp.2860-2870, 1994
  9. 권재도, '재질열화가 균역진전에 미치는 영향과 수명예측에 관한 연구,' 대한기계학회논문집, 제13권 제5호, pp.821-927, 1989
  10. N. Shinya,'316ステンレス鋼のクリ-プ破斷性質と微紬組織變化,' Tetsu-to-Hagane, S1260, p.206, 1982
  11. B. Weiss, R. Stickler, 'Phase Instabilities During High Temperature Exposure of 316 Austenitic Stainless Steel,' Metallurgical Transactions. Vol. 3,pp.851-866, 1972 https://doi.org/10.1007/BF02647659
  12. K. Taguchi, 'The Influence of Thermal Ageing on the Tensile and Fatigue Properties of Advanced 316 Steel for FBR Structures,' Sixth Intemational Conference on Creep and Fatigue, pp.221-225, 1996
  13. R. A. Perkins, T. P. Carlson, 'The Volume Diffusion of Carbon in Fe-17wt.Pct.Cr-12wt.Pct.Ni,' Metallurgical Transactions,Vol.5, pp. 1511-1514, 1974 https://doi.org/10.1007/BF02646642
  14. ASM Handbook Committee, Metallography and Microstructure, ASM Handbook 9th ed., Vol.9,pp.123-134, 1998
  15. ASM Handbook Committee, Metallography and Microstructure, ASM Handbook 9th ed., Vol.9, pp.279-296, 1998
  16. ASTM Fatigue and Fracture committee, 'Standard Test Method for Measurement of Fatigue Crack Gorwth Rates,' Annual Book of ASTM Standards Section 3, Vol.03.01, E 647, pp.578-614, 1995
  17. ASTM Mechanical Testing Committee, 'Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials,' Annual Book of ASTM Standards Section 3, Vol.03.01, E21,pp.129-136, 1995
  18. R. J. Bucci, 'Development of a Proposed ASTM Standard Test Method for Near-Threshold Fatigue Crack Growth Rate Measurement,' Fatigue Crack Growth Measurement and Data Analysis, ASTM STP 738, pp.5-28, 1997
  19. K. Schwalbe, R. A. Ainsworth, A. Saxena, T. Yokobori, 'Recommendations for Modification of ASTM E 1457 to Include Creepbrittle Materials,' Engineering Fracture Mechanics, Vol.62,pp.123-142, 1999 https://doi.org/10.1016/S0013-7944(99)00012-0
  20. 김정근, 김기영, 박해웅, 금속현미경 조직학, 도서출판골드, pp.567-569, 1999
  21. G. E. Dieter, 'Mechanical Metallurgy,' MCGraW-Hill, Materials Science and Engineering Series, pp.212-218, 1998