DOI QR코드

DOI QR Code

Development of Integrated Process Management System for Pump Dredge

펌프식 준설선의 통합공정관리시스템 개발

  • Jeong, Dae-Deuk (Division of Maritime Transportation System Engineering, National Mokpo Maritime University) ;
  • Lee, Joong-Woo (Division of Civil and Environmental Engineering, National Korea Maritime University) ;
  • Cho, Jeung-Eon (Eunjin Development, Co)
  • 정대득 (목포해양대학교 애상운송시스템공학부) ;
  • 이중우 (한국해양대학교 토목환경시스템공학부) ;
  • 조증언 (은진개발(주) 대표이사)
  • Published : 2002.03.01

Abstract

Efficiency of dredging work depends on the types of equipment used, the sediments encountered, whether the work to be performed is new or for maintenance, pre and/or post hydrographic surveying and so forth. Among those, surveying accuracy which is directly determined by the control of the dredge's position and depth surveying accuracy being surveyed at the dredging point are important factors. The purpose of this study is to develop an integrated process management system for pump dredge. The system is composed of 4 sub-systems such as LADGPS for dredge positioning dredging point determination, tidal gauge and angular depth sensor for depth determination, and GIS and ENC process management. The process management system for pump dredge developed was installed on the pump dredge "EUNJIN PD-2" but is now producing work data for comparison with performance of the existing dredge. The data retrieved from the pump dredge process management system up to now shows similar result from the grab dredge management system which was developed previously. It is easy to operate, achieves good accuracy with only 45cm unevenness, reduces working perioa by 20 percint,. More precise evaluation of the system comes later after the dredging work is completed.completed.

준설작업 효율성은 장비의 형식, 준설토의 특성, 작업의 성격, 작업 시행 전.후에 이루어지는 측량작업 등에 의해 결정된다. 특히, 준설선의 위치제어와 준설지점의 수심 측량은 전체 공정의 효율성 결정에 중요한 인자가 된다. 우리나라 준설업체가 주로 보유하고 있는 펌프식 준설선은 연속작업이 가능하고, 타 기종에 비해 작업해역에서 탁도 발생이 적다는 장점이 있지만 제거되는 슬러리에 토사 함유량이 적고, 위치 정확도가 낮다는 큰 단점이 있다. 본 연구에서는 LADGPS, 조석관측시스템, 광센서 각도추출장치, GIS와 전자해도를 이용하여 4개의 하부시스템으로 구성된 펌프식 준설선 통합공정관리시스템을 개발하여 준설선 위치제어, 실재 굴착이 이루어지는 준설지점의 위치결정, 작업해역의 조위가 보정된 실시간 수심결정, 작업지시내용 및 작업성과를 기록하고 이들 모든 정보를 작업자 모두가 실시간으로 모니터링하고 제어하는 공정관리를 수행할 수 치도록 하였다. 이 시스템을 펌프식 준설선인 '||'&'||'quot;은진PD-2'||'&'||'quot;에 설치하여 운영하였으며, 기존의 작업방식과의 작업효율성 비교를 위한 작업성과 데이타는 아직 추출하지 못했지만 일부 유사한 하$\circledcirc$시스템이 적용된 그라브 쿤설선 공정관리시스템의 효율성 분석결과에서 준설해역의 편평도가 45cm 이내로 양호하고, 작업기간을 227f 단축하였으며, 작업비용을 16.6% 절감된 것으로 나타났다.

Keywords

References

  1. 고광섭, 임정빈, 임봉택, 심영호 (1996), 선박용GPS-compass구현을 위한 GPS 오차패턴 분석에 대한연구, 해양안전학회지 제2권 제2호, pp.47-51
  2. 은진개발(주)(1999), 은진 G-18호 Grab 준설선 소개서
  3. 정대득, 이중우, 조중언 (2001), 준설공정관리시스템 개발에 관한 연구, 한국항만학회지 제15권 제1호, pp.75-85
  4. 최범규 (2001), 해상에서 GPS의 다양한 활용예, 2001년 춘계 해양관련학회 공동 학술발표회 초록집, pp.58-65
  5. 한국과학기술원 해양연구소(1984), 海洋觀測便覽
  6. John B. Herbich(1992), Hand book of Dredging Engineering, McGRAW-HILL INC.
  7. Per Bruun (1990), Port Engineehng, Fourth Edition, Vol.2, Gulf Publishing Company, Texas.
  8. US Army corps of engineers(1994), Engineering and Design Hydrographic Surveying
  9. US Army corps of engineers(1998), Project Operations Hydrographic Surveying

Cited by

  1. Development of Hydrographic Dredging Surveying and Construction Management System Based on Grab Dredger vol.21, pp.4, 2013, https://doi.org/10.7319/kogsis.2013.21.4.003