Study of the Thrust Vector Control using a Secondary Flow Injection

2차 유동 분사에 의한 제트 유동의 추력 제어에 관한 연구

  • 정성재 (안동대학교 기계공학과 대학원) ;
  • ;
  • 김희동 (안동대학교 기계공학부) ;
  • 안재문 (스페이스리써치(주)) ;
  • 정동호 (스페이스리써치(주))
  • Published : 2002.08.01

Abstract

In general, Liquid Injection Thrust Vector Control(LITVC) is accomplished by injecting a liquid into the supersonic exhaust flow through holes in the wall of the propulsion nozzle. This injection flow field is highly complicated and detailed flow physics associated with the secondary flow injection should be known far the practical design and use of the LITVC system. The present study aims at understanding the LTTVC flow field and obtaining fundamental design parameters for LITVC. The experimentations were performed in a supersonic blow-down wind tunnel. Compressed, dry air was used for both the main exhaust and injection flows but the pressures of these two flows were controlled independently. The location of the injection holes was changed and the pressures of the two streams were also changed between 2.0 and 15.0 bar. The effectiveness of LITVC was discussed in details using the results of the pressure measurements and flow visualizations

Keywords