• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.610-613
• /
• 1995

In addition to propulsive force to a flying vehicle, a rocket propulsion system can provide moments ro rotatate the flying vehicle and thus provide control of the vehicle's attitude and flight path. By controlling the direction of the thrust vectors, it is possible to control a vehicle's pitch, yaw, and roll motions. In this paper, we will introduce general thrust vector control mechanisms.

• 한국추진공학회지
• /
• 제23권1호
• /
• pp.24-32
• /
• 2019

유체 추력벡터 제어에서 이중목 노즐 개념의 이용 가능성을 조사하기 위하여, 초음속 노즐에서 수치해석을 수행하였다. 수치해석 검증에서 SST $k-{\omega}$ 난류모델을 사용하여 실험결과를 잘 구현하였다. 광범위한 노즐 압력비와 분사 압력비에서 편향각도, 시스템의 전체 추력비 및 추력 효율을 조사하였다. 본 연구에서 이중목 노즐의 추력벡터제어 시스템의 성능 변화는 2차원 계산영역에서 명확하게 설명되었다. 본 연구에서 얻어진 결과들은 유체추력벡터제어 분야에 중요한 기초자료를 제공할 것이다.

• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.393-400
• /
• 2022

고고도 교전 시 사용되는 궤도수정 및 자세제어 시스템(Divert and Attitude Control System, DACS)은 고가이며 복잡하다. 본 논문에서는 비교적 단순하고 저가인 추력벡터제어(Thrust Vector Control, TVC)를 탑재한 유도탄의 고고도 종말 유도조종 루프를 제안한다. 본 유도조종 루프는 쿼터니언 피드백 제어기법을 이용하여 진 비례항법유도로 산출된 가속도 명령으로부터 변환된 추력 자세각 명령을 추종하며 유도를 수행한다. 고고도에서 탄도탄에 대한 교전 시뮬레이션을 통하여 제안한 유도조종 루프의 성능을 분석한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.675-678
• /
• 2017

In the present, various methods have been employed to obtain the lesser thrust loss. Numerical simulations have been carried out for optimizing the thrust vector control system. Thrust vector control based on coflowing shear layer is an effective method to control the primary jet direction in the absence of moving parts. Thrust vector in symmetric nozzles is acquired by secondary flow injections that result to boundary layer separation. The pressure in secondary flow inlet was varied to check the deflection angle of jet flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.192-197
• /
• 2004

Recently, fluidic thrust vectoring methods have been preferably employed to control the movement of propulsive systems due to relatively simpler design and lower cost than mechanical thrust vectoring methods. For An application of the thrust vectoring to flight bodies, it is necessary to understand very complicated exhaust flows which are often subject to shock waves and boundary layer separation. But researches for the thrust vector control using counterflow have been few. In the present study, experiments have been performed to investigate the characteristics of supersonic jets controlled by a thrust vectoring method using counterflow. The primary jet is expanded through a two-dimensional primary nozzle shrouded by collars, and is deflected by the suction of the air near nozzle into an upper slot placed between the primary nozzle and the upper collar. A shadowgraph method is used to visualize the supersonic jet flowfields. Primary nozzle pressure ratios and suction nozzle pressure ratios are varied from 3.0 to 5.0, and from 0.2 to 1.0 respectively. The present experimental results showed that, for a given primary nozzle pressure ratio, a decrease in the suction nozzle pressure ratio produced an increased thrust vector angle. As the suction nozzle pressure ratios were increased and decreased, the hysteresis of the thrust vectoring was observed through the wall pressure distributions

• 한국항공우주학회지
• /
• 제44권10호
• /
• pp.911-920
• /
• 2016

발사체의 피치 및 요 축 자세제어를 위해 엔진의 연소 중 추력의 방향을 변화시키는 추력벡터제어를 많이 사용한다. 발사체의 추력벡터제어를 위한 구동장치로는 중량 대비 동력 효율이 좋은 유압식 구동장치를 보편적으로 사용하여 왔으나 요즘은 고효율의 전기모터 개발과 모터 제어 기법의 발전으로 상대적으로 규모가 작은 발사체의 추력벡터제어에는 전기기계식 구동장치시스템을 적용하는 연구를 많이 수행하고 있다. 본 논문에서는 한국형발사체 3단 엔진의 추력벡터제어를 위해 개발 중인 직구동 방식의 전기-기계식 구동기의 설계 내용 및 시제품 시험결과를 기술하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.123-127
• /
• 2009

기계적 제어장치를 사용하지 않으면서도 추력방향 제어가 가능한 유체역학적 추력편향제어(Fluidic Thrust Vector Control; FTVC)기법에 대한 연구 논문이다. 2차 유동은 주 유동 흐름과 같은 방향으로 분사하였고, 선행연구를 통해 정상(steady)상태의 수치해석 결과는 실험과 비교 검증하였다. 이를 바탕으로 비정상(unsteady) 수치해석을 수행하였고, 위아래로 제트가 편향이 될 때에 소요되는 시간과 벽면에서의 압력 분포 등을 조사하여 추력벡터의 동특성을 연구하였다.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1523-1531
• /
• 2017

In general, the thrust vector control should be fast and stable in the initial launch phase. Two types of conventional controllers, one is for pitch angle control and the other is for pitch rate control, are designed based on the equation of motion without aerodynamics and are compared in the viewpoints of the stability margin and the time response performance. Also analyzed are the rejection capabilities to cope with high aerodynamic disturbances caused by high angle of attacks in initial booting phase. Additionally, time response features at actuator saturation are investigated. Based on those results, we suggest a controller structure which is more suitable for thrust vector control of missiles at initial booting phase.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1948-1954
• /
• 2003

The thrust vector control using a fluidic counterflow concept is achieved by applying a vacuum to a slot adjacent to a primary jet which is shrouded by a suction collar. The vacuum produces a secondary reverse flowing stream near the primary jet. The shear layers between the two counterflowing streams mix and entrain mass from the surrounding fluid. The presence of the collar inhibits mass entrainment and the flow near the collar accelerates causing a drop in pressure on the collar. For the vacuum asymmetrically applied to one side of the nozzle, the jet will vector toward the low-pressure region. The present study is performed to investigate the effectiveness of thrust vector control using the fluidic counterflow concept. A computational work is carried out using the two-dimensional, compressible Navier-Stokes equations, with several kinds of turbulence models. The computational results are compared with the previous experimental ones. It is found that the present fluidic counterflow concept is a viable method to vector the thrust of a propulsion system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.592-597
• /
• 2003

Thrust vector control using a coflow-counterflow concept is achieved by suction and blowing through a slot adjacent to a primary jet which is shrouded by a suction collar. In the present study, the flow characteristics of thrust vectoring is investigated using a numerical method. The nozzle has a design Mach number of 2.0, and the operation pressure ratio is varied to obtain various flow features of the nozzle flow. Test conditions are in the range of the nozzle pressure ratio from 6.0 to 10.0, and a suction pressure from 90kPa to 35kPa. Two-dimensional, compressible Navier-Stokes computations are conducted with RNG ${\kappa}-{\varepsilon}$ turbulence model. The computational results provide an understanding of the detailed physics of the thrust vectoring process. It is found that an increase in the nozzle pressure ratio leads to increased thrust efficiency but reduces the thrust vector angle.