• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.20-27
• /
• 2008

The characteristics of compressible flow are different from those of incompressible flow from the mathematical and physical point of view. Therefore, the way to solve the flowfield is different between compressible flow and incompressible flow. In general, density-based numerical algorithm is mainly used for compressible flow solver development. On the other hand, incompressible flow solver prefers to use pressure-based numerical algorithm. In this research, a compressible Navier-Stokes flow solver is developed by means of extending from pressure-based incompressible numerical algorithm to handle both compressible and incompressible flows using the same flow solver. The present flow solver is tested at various speed ranges and compared with the solutions of density-based compressible flow solver. Numerical results show a good agreement between two flow solvers.

• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.53-61
• /
• 1999

Two-dimensional, unsteady, incompressible and compressible Navier-Stokes codes are developed for the computation of the viscous turbulent flow over high-lift airfoils. The compressible code involves a conventional upwind-differenced scheme for the convective terms and LU-SGS scheme for temporal integration. The incompressible code with pseudo-compressibility method also adopts the same schemes as the compressible code. Three two-equation turbulence models are evaluated by computing the flow over single and multi-element airfoils. The compressible and incompressible codes are validated by predicting the flow around the RAE 2822 transonic airfoil and the NACA 4412 airfoil, respectively. In addition, both the incompressible and compressible code are used to compute the flow over the NLR 7301 airfoil with flap to study the compressible effect near the high-loaded leading edge. The grid systems are efficiently generated using Chimera overlapping grid scheme. Overall, the κ-ω SST model shows closer agreement with experiment results, especially in the prediction of adverse pressure gradient region on the suction surfaces of high-lift airfoils.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.101-108
• /
• 2000

Pipe network analysis is analyze all of it about pressure and volume flow rate through that are pipeline, junction, regulator and valve etc. In this study is compare TVD with MOC method for analysis of unsteady compressible flow in pipelines. Then, we calculated unsteady compressible flow for pipe network that periodic volume flow rate conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.143-146
• /
• 2002

Recently the micro flows have been received much attention in the applications with regard to Micro Electro Mechanical Systems(MEMS). Such flows are governed by relatively large viscous forces, compared with inetia force, and frequently specified by slip wall boundary conditions. In the present study, computations are applied to investigate the compressible viscous flows through an extremely small channel, and theoretical analyses are conducted using the Fanno flow theory. The axisymmetic, compressible, Wavier-Stokes equations are numerically solved by a fully implicit finite implicit method. The predicted results are validated with previous experimental data available. The results obtained show that for small Reynolds numbers, the viscous frictional force significantly influences the compressible micro channel flows.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2190-2203
• /
• 2004

A combined procedure for two-dimensional Delaunay mesh generation algorithm and an adaptive remeshing technique with higher-order compressible flow solver is presented. A pseudo-code procedure is described for the adaptive remeshing technique. The flux-difference splitting scheme with a modified multidimensional dissipation for high-speed compressible flow analysis on unstructured meshes is proposed. The scheme eliminates nonphysical flow solutions such as the spurious bump of the carbuncle phenomenon observed from the bow shock of the flow over a blunt body and the oscillation in the odd-even grid perturbation in a straight duct for the Quirk's odd-even decoupling test. The proposed scheme is further extended to achieve higher-order spatial and temporal solution accuracy. The performance of the combined procedure is evaluated on unstructured triangular meshes by solving several steady-state and transient high-speed compressible flow problems.

• 대한기계학회논문집B
• /
• 제32권6호
• /
• pp.429-445
• /
• 2008

Two-phase compressible flow fields of air-water are investigated numerically in the fixed Eulerian grid framework. The phase interface is captured via volume fractions of each phase. A way to model two phase compressible flows as a single phase one is found based on an equivalent equation of states of Tait's type for a multiphase cell. The equivalent single phase field is discretized using the Roe‘s approximate Riemann solver. Two approaches are tried to suppress the pressure oscillation phenomena at the phase interface, a passive advection of volume fraction and a direct pressure relaxation with the compressible form of volume fraction equation. The direct pressure equalizing method suppresses pressure oscillation successfully and generates sharp discontinuities, transmitting and reflecting acoustic waves naturally at the phase interface. In discretizing the compressible form of volume fraction equation, phase interfaces are geometrically reconstructed to minimize the numerical diffusion of volume fraction and relevant variables. The motion of a projectile in a water-filled tube which is fired by the release of highly pressurized air is simulated presuming the flow field as a two dimensional one, and several design factors affecting the projectile movement are investigated.

• 한국항공우주학회지
• /
• 제49권6호
• /
• pp.449-456
• /
• 2021

본 연구에서는 저마하수 예조건화 기법이 적용된 기존 압축성 해석자의 해석 범위를 최소한의 수정으로 비압축성 유동해석이 가능하도록 확장하는 전략을 제시하였다. 이를 위해 압축성 총 에너지 방정식과 동일한 형태의 에너지 방정식을 사용하였다. 이러한 에너지 방정식은 비압축성 지배방정식인 연속방정식, 열에너지 방정식과 역학적 에너지방정식의 선형 조합을 통해 얻어진다. 이렇듯 압축성 방정식과 동일한 형태를 갖는 비압축성 지배방정식에 시간 전진 기법을 적용하기 위해 Turkel의 가상 압축성 기법을 적용하였다. 또한 Roe 평균이 공통의 압축성/비압축성 지배방정식에서 모두 유효함을 보였다. 압축성 해석자에 위 내용을 적용하여 비압축성 해석이 가능하도록 확장하는 과정은 본래의 압축성 해석자를 이용한 압축성 해석에 아무런 영향이 없다. 확장된 해석자를 통한 비압축성 해석 검증을 위해 비점성, 층류 그리고 난류 유동에 대한 순차적 해석을 수행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.123-126
• /
• 2002

Very frequently the compressible flow in an extinction nozzle of gas circuit breaker is simulated under no arc assumption, which can be reasonable for both high and low current breakings. In the present study, computations are performed to investigate the major features of the compressible flows inside the arc extinction nozzle of gas circuit breaker. A fully implicit finite volume scheme is applied to solve the two-dimensional, steady, compressible, Wavier-Stokes equations. The computed results are validated with the previous experimental data available. Several types of turbulence models are explored to reasonably predict the complicated flows inside the arc extinction nozzle. The obtained results show that the shock wave boundary layer interaction inside the nozzle significantly influences the whole performance of the gas breaker.

• 자원환경지질
• /
• 제41권6호
• /
• pp.731-746
• /
• 2008

대부분의 분을 흐름 접근 방식을 따르는 다상흐름모델들은 주로 유체나 매질의 비 압축성을 가정하거나 완전한 삼상 오염물을 다루지 않고 이상 유체 (물 또는 공기, 물 또는 불용융성유체)의 거동만을 다룬다. 그러나 본 연구에서는 유체 및 매질의 압축성과 완전한 삼상 오염물을 가정하는, 분율흐름접근방식을 따르는 수학적 지배방정식을 개발하고, 이를 토대로 압축성 유체 및 매질을 고려한 삼상흐름 수치모의프로그램을 개발하였다 개발된 삼상흐름 수치모의프로그램 (Compressible Multiphase Flow Simulator, CMPS)을 검증하기 위해서 기존에 개발된 비압축성 유체 및 매질을 고려한 삼상흐름수치모의 프로그램인 MPS (Suk and Yeh, 2007; Suk and Yeh, 2008) 및 해석해를 통해서 간접적으로 비교 검증하였다. 비교결과 CMPS와 MPS의 결과와 해석해들은 서로 잘 일치하였다. 따라서 CMPS는 압축성 유체 및 매질을 고려한 삼상흐름 수치모의를 구현 할 수 있는 가능성을 가진다.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.52-61
• /
• 2014

The present paper deals with the efficient computation of higher-order CFD methods for compressible flow using graphics processing units (GPU). The higher-order CFD methods, such as discontinuous Galerkin (DG) methods and correction procedure via reconstruction (CPR) methods, can realize arbitrary higher-order accuracy with compact stencil on unstructured mesh. However, they require much more computational costs compared to the widely used finite volume methods (FVM). Graphics processing unit, consisting of hundreds or thousands small cores, is apt to massive parallel computations of compressible flow based on the higher-order CFD methods and can reduce computational time greatly. Higher-order multi-dimensional limiting process (MLP) is applied for the robust control of numerical oscillations around shock discontinuity and implemented efficiently on GPU. The program is written and optimized in CUDA library offered from NVIDIA. The whole algorithms are implemented to guarantee accurate and efficient computations for parallel programming on shared-memory model of GPU. The extensive numerical experiments validates that the GPU successfully accelerates computing compressible flow using higher-order method.