• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.186-192
• /
• 1987

ZrO2 powders having high purity were prepared from domestic zircon sand using the caustic fusion method and the soda ash sintering process. In the caustic fusion method, ZrO2 recovery was reached to 96% when 100/140 mesh zircon was reacted with NaOH at the NaOH/Zircon mole ratio 6 and at 650$^{\circ}C$ for 2 hours. And in the soda ash sintering process, ZrO2 was recovered to 88.5% when -325 mesh zircon was reacted with Na2CO3 at the Na2CO3/Zircon mole ratio 1.1 and 1050$^{\circ}C$ for 2 hours. In both cases, Zr component was extracted to ZrOCl2, subsequently crystallized to ZrOCl2$.$8H2O to increase the purity, and converted to ZrO2 by precipitation. And to increase the sinter ability of powder, Cl- ion was removed and strong agglomeration was avoided by methanol distribution of Zr(OH)4 precipitates.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2002

Silica sand, zircon sand, and steel shots were used as mold packing materials in lost foam casting of the aluminum alloy bar. Vibration acceleration in three directions and temperatures in the casting and mold were measured, and packing and cooling characteristics of these materials were investigated. Packing densities increased with increase in vibration magnitude and time, and were $1.41{\sim}1.49g/cm^2$ for silica sand, $2.54{\sim}2.86g/cm^2$ for zircon sand, and $3.92{\sim}4.52g/cm^2$ for steel shots. Sound castings were obtained only without evacuation of the flask during pouring. Solidification time became faster in order of silica sand, zircon sand and steel shot packing because steel shot has the highest cooling capacity of them. Solidification time of steel shot packing was shortened to about 1/2 of silica sand packing. Cooling capacity of sand mold was generally evaluated by heat diffusivity of the mold, however could be simply evaluated with specific heat per unit volume of the packing material in lost foam casting.

• 한국세라믹학회지
• /
• 제14권2호
• /
• pp.88-94
• /
• 1977

Zircon sand of two different particle distribution with 2 percent of ground pyrophyllite were adoted to prepare the dense specimens of the stopper nozzle for the tundish. The molding pressure of $600kg/cm^2$ brought about the superior properties to those obtained t the pressure of $300kg/cm^2$, and as the firing temperatures were increased from $1, 350^{\circ}C$ to $1, 600^{\circ}C$, the better characteristics resulted. The addition of 2 percent $MgCr_2O_4$ to zircon pyrophyllite batch was more effective in corrosion-resistance to the blast furnace-slag.

• 한국주조공학회지
• /
• 제13권5호
• /
• pp.450-461
• /
• 1993

AC4C alloy casts in the metallic mold, zircon sand mold, silica sand mold and shell mold with the pouring temperatures of 680, 710 and $740^{\circ}C$ have been investigated. The tensile strength, elongation and hardness of AC4C alloy castings have been influenced by the kind of molds used. The mechanical properties in zircon sand mold castings were greater than those in other sand mold castings, but were inferior to the properties in metallic mold castings. Eutectic Si particle size and DAS were increased in the order of metallic mold, ziron sand mold, silica sand mold and shell mold. Also, they were increased with the increase of pouring temperatures. DAS, eutectic Si particle size and grain size decreased with the increase of mechanical properties as the cooling rate increased. The eutectic Si particle size and DAS of AC4C alloy castings after T6 treatment were decreased in as-cast. The variation of eutectic Si particle size has been effected on the tensile strength, elongation and fractured surface.

• 분석과학
• /
• 제6권3호
• /
• pp.275-282
• /
• 1993

지르콘사 광물에서 지르코니아를 회수하기 위하여 지르콘사를 분해 반응시킨 소성산물 중의 $SiO_2$와 $ZrO_2$를 DC arc source를 이용한 직독식 분광기로 동시 분석하였다. 순수한 금속산화물을 혼합하여 합성표준시료를 만들고 완충제(흑연)와 융제($Li_2B_4O_7$)의 혼합비를 조절하면서 최적의 들뜸조건을 선정하였다. 완충제와 흑연의 비를 0.22:1로 하고 시료와의 혼합비를 40배로 하였을 때 가장 좋은 들뜸조건을 얻을 수 있었다. 분석 결과의 표준편차는 $SiO_2$는 1.3%, $ZrO_2$는 4.9%였다.

• 한국광물학회지
• /
• 제24권1호
• /
• pp.1-17
• /
• 2011

경기도 옹진군부근의 근해로부터 채취된 해사로부터 비중 및 자력선별을 통한 중광물의 회수공정을 실시하여, 광물학적 특성을 분석하였다. 옹진군 해사 내에 포함된 중광물로는 티탄철석, 저어콘, 소량의 모나자이트 및 석류석 등이 있으며, 맥석광물로는 석영, K-장석, 사장석, 백운모, 보통각섬석, 녹염석, 녹니석 등이 있다. SIROQUANT 프로그램을 이용한 광물 정량분석 결과, 요동테이블 선별, 영구자석을 이용한 자력선별(rare-earth magnetic separation) 및 전자석 자력선별(Eddy current magnetic separation)로부터 회수한 유용광물인 티탄철석의 함량은 각각 0.8, 18.3, 48.7%로 증가되었다. 또한 원사, 1차 비중, 2차 비중, 1차 자력 및 2차 자력선별 산물 중 대표시료 및 중광물군에 대한 화학분석치로부터 재계산시, 티탄철석 및 모나자이트의 함량은 각각 0.23, 0.55, 5.22, 16.17, 44.99% 및 0.11, 0.02%, 0.16, 0.51, 1.19%로 증가하였다. 그러나 저어콘의 경우에는 0.13, 0.12, 0.11, 0.15, 0.10%로 큰 변화를 보이지 않았지만, 2차 비중선별시료 중 가장 미립인 -140 메시 입단의 경우 0.27%의 높은 값을 보임으로써 입도분리를 통한 선별 시, 회수율 증대가 기대된다.

• 자원환경지질
• /
• 제7권3호
• /
• pp.87-100
• /
• 1974

This paper deals with grain size analysis, heavy mineral analysis and trace element analysis of the recent sediments of Han River basin between Cheongpyong, Gyeonggi province and Seoul. For each location the samples are taken at river shoreline, river berm and river dune. The size analysis discloses that the mean values range from $-1.37{\phi}$ to $-1.60{\phi}$, sorting values range from 0.25 to 1.84, skewness values range from -0.44 to 0.51 and kurtosis values range from -0.1 to 1.75. Based on the textural parameters, the dune sand can be distinguished from the shoreline-berm sand. The content of heavy minerals of each sample ranges from 0.04 to 4.7%. The principal heavy minerals are ilmenite, magnetite, leucoxene, garnet, amphibole, pyroxene, kyanite, zircon, monazite, tourmaline, epidote, limonite, and minor minerals are apatite, sillimanite, andalusite and olivine. In general, dune sand samples contain more heavy minerals than the samples of shoreline or berm sand. This suggests that the heavy mineral concentration is affected by wind action more than by any other causes. The content of ilmenite and leucoxene decreases, whereas the content of zircon and epidote increases as it approaches the downstream region. The differences result from the variance of geological occurrences. The emission spectrochemical analysis and colorimetry analysis revealed that the content of Ni and V in the heavy minerals of the study area are higher than those of other stream sediments in Korea. On the other hand the content of Cu, Ph, Zn, Mo, W, P, Mn, Cr, Ag and Sn are lower in the study area. It has been observed also that the contents of all the elements except for Bi are higher in this area than the samples of marine sediments of Yellow Sea.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.955-973
• /
• 2018

Twenty-eight beach sand samples from the shorelines of Aegean islands adjacent to the plutonic rocks of the Atticocycladic zone were analyzed for major and rare earth element (REE) contents. Results are compared with the adjacent plutonic rocks, in order to determine relative enrichments or depletions and assess the potential for REE exploitation. Among the samples, several are significantly enriched in REE, being deposits of heavy minerals and their concentrations are controlled by the sea waves and local winds. These samples contain Th, U and REE rich minerals such as zircon, xenotime and allanite. The available geochemical characteristics were also used to confirm the parent rocks of the beach sands. The heavy fractions (total, total magnetic and total non-magnetic) of the beach sands are very well correlated with the Heavy REE (HREE) concentrations. Among the minerals of the heavy magnetic fraction, allanite seems to control the REE content in the heavy mineral-enriched samples, while from the heavy non-magnetic fraction, zircon controls mainly the HREE fraction. One site from Mykonos and 3 from Naxos could have potential for REE exploitation as they present the highest ${\Sigma}REE$ and HREE contents than other beach sand placers measured in Greece (Kavala, Sithonia, Maronia, Samothraki, NE Chalkidiki).

• 한국재료학회지
• /
• 제34권5호
• /
• pp.247-253
• /
• 2024

The separation of zirconium and hafnium using tributyl phosphate (TBP)-Dodecane extractants in nitric acid medium was performed. Zirconium oxychloride, used as extraction feed, was obtained from the synthesis of Kalimantan zircon sand concentrate smelted using NaOH. The extraction process was carried out by dissolving chloride-based metals in nitric acid media in the presence of sodium nitrate using TBP-Dodecane as an extractant. Some of the extraction parameters carried out in this study include variations in organic phase and aqueous phase (O/A), variations in contact time, and variations in nitric acid concentration. Extraction was carried out using a mechanical shaker according to the parameter conditions. X-ray fluorescence (XRF) was used for elemental (Zr and Hf) composition analysis of the aqueous solution. The results showed that zirconium was separated from hafnium at optimum conditions with an organic/aqueous ratio of 1:5, contact time of 75 min, and an HNO₃ concentration of 7 M. The resulting separation factor of zirconium and hafnium using TBP-Dodecane was 14.4887.

• 자원환경지질
• /
• 제16권2호
• /
• pp.65-78
• /
• 1983

This report deals with the sedimentological study of the littoral sand of beaches in the Busan area. The purpose of this report is to know the grain size, mineralogical composition, heavy mineral and clay mineral of the beach sands, and gravity measurements of the Nagdong River Deltas. 1) As a whole, the littoral sand of the beaches are composed of uniformly medium grained, moderately sorted and nearly symmetrical. The barrier sand of the Nagdong Estuary is composed of fine grained, well sorted and nearly symmetrical. 2) The littoral sand of the beaches is transported by saltation and rolling. The barrier sand of the Nagdong Estuary is transported by suspension and saltation. 3) In the littoral sand of the beaches, the ratio of feldspar to quartz is 1 :2.31 and in the barrier sand of the Nagdong Estuary 1:1.40. 4) The content of heavy mineral of samples ranges from 0.54 to 3.87 %. The principal heavy minerals are hornblende, pyroxene, epidote, garnet, leucoxene, zircon, apatite, magnetite, hematite and ilmenite with minor accessories of rutile and olivine. 5) The x-ray diffraction analysis of the clay mineral informs the existence of quartz, feldspar, kaolinite and montmorillonite. The montmorillonite is considered to have been derived from the alteration of acidic volcanic rocks. 6) To determine the depositional structure of the Nagdong Estuary, Gravity measurements were made. Free air anomaly ranges from 14.5 mgal to 33.5 mgal and Bouguer anomaly ranges from 14.3 to 23.5 mgal and both are closely related to the topography. According to the interpreted layer structure, the upper layer composing sand, silt and clay, the intermediate layer composing sand with gravel, the lower layer composing weathered and soft rock, and bed rock composing hornfels or andesite. 7) The depositional environments of the study, the littoral area is dominated by the marine environment and the Nagdong Estuary by the mixed environment.