• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.59-64
• /
• 2011

Degree of unsaturation in fatty acid molecules plays an important role in the formation of vesicles. Vesicle formation from C18 fatty acids with different amount of double bonds such as oleic acid, linoleic acid and linolenic acid with the incorporation of 1,2-dipalmitoyl-sn-glycerol-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DPPE-PEG2000) have been examined by TEM. Critical vesicular concentrations (CVC) of the vesicle suspension are determined by turbidity and surface tension methods. The CVC of fatty acids increases when the amount of unsaturation in the alkyl chain increases. On the other hand, stability of vesicle suspension has been examined by using particle size and zeta potential at $30^{\circ}C$. There was a dramatic decrease in particle size measurement from mono-unsaturation to tri-unsaturation which could be due to the effect of fluidity in the membrane bilayer caused by different degree of unsaturation. The values of zeta potential for vesicles that were formed without the incorporation of DPPE-PEG2000 were in the range of -70 mV to -100 mV. It has been observed that the incorporation of DPPEPEG2000 to the vesicle reduces the magnitude of zeta potential. However, this phenomenon does not obviously seen in fatty acid vesicles formed by linoleate-linoleic acid and linolenate-linolenic acid. We therefore conclude that the addition of DPPE-PEG2000 does not effectively improve the stability of the linoleate-linoleic acid and linolenatelinolenic acid vesicle at pH 9.0 after the evaluation of their particle size and zeta potential over a period of 30 days. Although the vesicles formed were not stable for more than 10 days, they have displayed the potential in encapsulating the active ingredients such as vitamin E and calcein. The results show that the loading efficiencies of vitamin E are of encouraging value.

• 한국수산과학회지
• /
• 제33권5호
• /
• pp.455-462
• /
• 2000

점증하는 적조로부터 수산피해를 줄이는 것은 시급한 문제이다. 황토를 살포하여 적조생물입자를 응집 제거하는 것이 하나의 방법이 되고 있다. 황토를 이용하여 적조생물입자에 대한 응집실험을 한 결과는 다음과 같다. 본 실험에 사용한 황토입자의 입도 분포는 정규분포를 보여주는 하나의 peak로 나타났으며, 입자의 평균 지름은 $25.0 {\mu}m$이고, 약$84.5{\%}$의 황토입자가 $9.8-55.0{\mu}m$의 범위에 속하며 변동계수는 $65.1{\%}$이었다. 황토의 금속성분을 분석한 결과는 규소 (Si)가 $48{\%}$, 알루미늄 (Al)이 $35{\%}$, 철 (Fe)이 $11{\%}$로서 $94{\%}$를 차지하며 나머지 $48{\%}$는 칼릅 (K), 구리 (Cu), 아연 (Zn), 티타늄 (Ti) 등으로 구성되어 있었다. 전자현미경 사진에 나타난 황토입자의 표면은 거칠고 다공질이며 부정형의 입자로 되어 있었다. 황토입자는 $10^(-3)M$ NaCl의 수용액 중에서 pH가 증가함에 따라 negative zeta potential 값이 증가하여 pH 9.36에서 -71.3mV를 나타내고 이후 거의 일정한 값을 나타내었으며, pH 1.98에서 +1.8 mV를 나타내어 amphoteric surface charge를 가지는 물질의 성질을 나타내었다. 전하결정이온은 $H^+, OH^-$ 이온이고, pH 2 부근에서 PZPC를 나타내었다. 용액의 전해질이 NaCl일 경우 $10^(-2)M (pNa=2)$ 이상의 농도에서는 $Na^+$ 이온의 농도가 증가함에 따라서 황토입자의 negative zeta potential 값은 일률적으로 감소하다가 $Na^+$ 이온의 농도가 1M (pNa=0)이 되었을 때 zeta potential은 0에 근접하였다. 용액의 전해질이 2 :l electrolyte ($CaCl_2$와 $MgCl_2$)의 경우 $Ca^(+2)$ 이온의 농도가 증가함에 따라서 황토입자의 negative zeta potential 값이 일률적으로 감소하다가 약 $10^(-3)M (pCa=3)$의 농도에서 등전점을 나타내고 전하역전이 일어났다. 해수중의 황토와 적조생물 입자는 비슷한 negative zeta potential을 나타내었고, 점토 중에서 해사가 가장 큰 negative zeta potential을 나타내었다. 해수중에서 황토입자와 적조생물입자의 EDL은 해수에 포함된 고농도의 염류 농도로 인하여 극히 얇게 압축되고, 이런 상태에서 두 입자가 상호 접근할 경우 모든 간격에서 LVDW attractive force의 절대값이 EDL repulsive force의 절대값보다 항상 큰 값을 나타낸다. 해수중에서 황토입자와 적조생물입자는 모든 간격에서 negative total interaction energy 값 (attractive force)을 나타내어 항상 용이하게 floe을 형성할 수밖에 없는 조건에 있다. 적조생물입자의 응집제거 효율은 황토의 농도가 증가함에 따라서 지수함수적 ($Y=36.04{\times}X^(0.11); R^2=0.9906$)으로 증가하였으며, 황토의 농도 800mg/l까지 급격한 증가를 보이다가 황토의 농도가 계속 증가함에 따라서 완만한 증가를 나타내었다. 적조생물은 황토 6,400mg/l에서 거의 $100{\%}$ 응집제거 되었다. 황토 800 mg/l을 사용하고 G-value를 $1, 6, 29, 139 sec^(-1)$로 단계적으로 증가시킴에 따라 응집제거 효율은 지수함수적으로 증가하였다. 이는 응집반응의 효율을 높이기 위해서는 황토입자와 적조생물입자 사이에 충분한 충돌이 일어날 수 있도록 교반하는 것이 매우 중요함을 나타내 주는 것이다. $800mg/l$의 농도에서 황토는 철을 함유하지 않은 다른 점토보다 $28.8{\~}60.3{\%}$ 더 높은 처리효율을 나타내었다. 황토에는 >SiOH의 음전하단과 수중의 phenolphthalein alkalinity를 소모하는 수화금속화합물의 양전하단이 공존하며, 이 수화금속화합물에 의하여 황토가 나머지 점토 특히 해사와 다른 응집특성을 보여주는 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1288-1291
• /
• 2004

In this study, physical characteristics of alumina slurry on variation of pH value and the effect of non-ionic surfactants on alumina slurry for copper chemical mechanical planarization (CMP) slurry have been investigated. After pH value of the slurry with alumina abrasive was changed by adding various amount of $HNO^3$ or KOH, the differences of settling rate, particle size, and zeta-potential were estimated. Better settling rates were shown in slurries with alumina abrasive at near pH 1. Higher zeta-potential was shown at around pH 2 in alumina slurry and the point of zero charge (PZC) was measured at about pH $9\sim10$. Non-ionic surfactant was added in the slurry with 5wt% alumina abrasive to get its effect on slurry practically. Abrasive size was smaller increased when amount of surfactant increased in slurry with P-4 as abrasive; on the other side, it was smaller when amount of surfactant decreased with AES-12. Variation of zeta-potential has no tendency with adding surfactant; however, values of zeta-potential were between $35\sim50mV$. The proper amount of surfactant was $0.1\sim1.0wt%$ in slurry with P-4 and $0.5\sim1.0wt%$ in slurry with AES-12 respectively. Excellent dispersion stabilization was obtained by addition of non-ionic surfactant

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.969-971
• /
• 2007

The black/white electronic ink containing high mobility white nano particles and the organic black pigment particles dispersed in dielectric fluid were prepared. A charge control agent affects the electrophoretic zeta potentials of white particle, which show the maximum value in zeta potential. The electronic ink panel fabricated with the charged white particles and the black particles exhibits more than 15:1 contrast ratio at 10V.

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.167-177
• /
• 2018

The removal characteristics of As and Se ions from aqueous solution by hexadecyl trimethyl ammonium bromide (HTMAB) modified anthracite (HTMAB-AT) were investigated under various conditions of contact time, pH and temperature. When the pH is 6, the zeta potential value of anthracite (AT) is -24 mV and on the other hand, the zeta potential value of the HTMAB-AT is +44 mV. It can be seen that the overall increase of about 60 mV. Increasing the (+) potential value indicates that the surface of the adsorbent had a stronger positive charge, so adsorption for the anion metal was increased. The isotherm data was well described by Langmuir and Temkin isotherm model. The maximum adsorption capacity was found to be 7.81 and 6.89 mg/g for As and Se ions from the Langmuir isotherm model at 298 K, respectively. The kinetic data was tested using pseudo first and pseudo second order models. The results indicated that adsorption fitted well with the pseudo second order kinetic model. The mechanism of the adsorption process showed that adsorption was dependent on intra particle diffusion model according to two step diffusion. The thermodynamic parameters(${\Delta}G^{\circ}$, ${\Delta}H^{\circ}$, and ${\Delta}S^{\circ}$) were also determined using the equilibrium constant value obtained at different temperatures. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

• 대한조선학회지
• /
• 제27권3호
• /
• pp.38-46
• /
• 1990

본 보에서는 축대칭포텐시얼유동에 대한 경계적분방정식의 해법이 제시된다. 이 문제는 고리용출점과 고리보오텍스에 의해서 표시되는데 이들의 세기는 한 구간내에서 매개변수 $\zeta$의 선형함수로 근사된다. 물체의 형상은 3차 B-spline으로 표시된다. 속도가 계산되는 점이 고리용출점이나 고리보오텍스에 접근할 때의 극한표현식이 $\zeta{ln}\zeta$항까지 유도된다. 수치계산에서 양 옆구간에 의한 주치적분은 정확하게 서로 상쇄되기 때문에 특이점에 의한 유기속도중 $\(\frac{1}{\zeta}\)$에 비례하는 항은 계산에서 제외된다. 그리고 ${ln}\zeta$에 비례하는 항과 $\zeta{ln}\zeta$에 비례하는 항은 해석적으로 적분이 가능하기 때문에 수치계산에서 이에 비례하는 항을 빼고 계산한 후 해석적으로 계산한 값을 더해 준다. 기타 수치적분은 4점 Gaussian Quadrature 공식에 의해서 수행되었다. 수렴률을 정하기 위하여 구간의 개수에 따른 평균자승근오차를 조사하였으며, 이 방법의 수렴률은 2에 접근점이 밝혀졌다.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.171-176
• /
• 2011

Organic matters that comprise a tiny part of seawater generally occur over 50% of membrane fouling in Reverse Osmosis Process. This study evaluates Foundation efficiency of reverse osmosis membranes under brackish and seawater conditions and resistance of organic fouling. Moreover, analyzing the membrane surface through roughness, contact angle and zeta potential results in roughness and contact angle are proportional to flux decline rate (FDR), yet FDR has high value when zeta potential is low level. Furthermore, with various membrane fouling of different raw water conditions, the flux tends to improve when pH value is high and raw water which is complex with organic and cation pollutes membrane faster than organic separated raw water condition.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.244-251
• /
• 2005

수열합성법에 의해 제조된 티탄산바륨 (BT01, BT02, BT03, BT04, BT05)의 입자크기와 분체특성과의 상관관계를 비표면적, 제타전위, XPS, XRD 및 SEM에 의해 조사하였다. 레이져광산법에 의해 측정된 입자의 크기는 비표면적과 XRD를 통해 결정된 격자이방성과 밀접한 관계가 있음을 보였다. 분말의 비표면적은 입자의 크기가 증가함에 따라 감소하였으며, BT03 시료는 동일한 입자크기의 BT04에 비하여 큰 비표면적을 보였으며, 이는 입자들의 응집에 기인하는 것으로 SEM사진 및 XRD 분석을 통하여 밝혀졌다. 입자의 크기가 증가함에 따라 제타전위는 증가하는 경향을 보였으며, BT02와 BT03 분말은 다른 분말에 비하여 제타전위가 큰 음의 값을 나타내었다. XPS 분석결과 분쇄시 티탄산바륨과 물 사이의 반응에 의한 $Ba^{2+}$ 이온의 용출과 관련이 있는 것으로 분석되었다.