• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.963-971
• /
• 2008

Unsaturated soil mechanics has been often used to find out a cause of failure (tensile failure) of retaining walls and hill slopes containing sandy soils. Checking shear strength is a popular method by considering suction stress developed form pore water menisci among the grains and saturated pockets of pore water under negative pressure. Linear Mohr-Coulomb failure criterion is generally adopted as a failure criterion. However, depending on relative density, stress history, and the magnitude of stress, the failure behavior of sand may not follow linear M-C frictional behavior. For stress in the large compressive ranges, say from tens to hundreds of kPa, the linear M-C criterion is an adequate representation for the shear strength behavior of sand. However, less than tens of kPa, the M-C criterion often can not be accurately represented. Depending on failure criterion, the uniaxial tensile strength is different over 100% relative error. For sand behavior under small compression regimes, therefore, such as under low or zero gravity, or under undergoing tensile failure in the crest area of hill slopes or behind retaining walls, it is important to consider the non-linear behavior.

• 한국정보통신학회논문지
• /
• 제10권9호
• /
• pp.1545-1550
• /
• 2006

최소분산프로세서는 정합장처리(Matched Field Processing : MFP)로서 해양 환경을 완전히 알고 있을 때 우수한 부엽(sidelobe) 억제 능력을 가지고 있다. 그러나 다중 표적 이 존재 시 최소분산프로세서는 선형 프로세서가 아니므로 각각의 표적에 의한 주엽(mainlobe) 뿐만 아니라 표적 상호간에 의한 부엽이 발생되므로 표적의 정확한 위치를 추정하지 못 할 수 있다. 따라서 본 논문은 해양에 분포한 다중 표적들의 위치를 추정하기 위하여 다중 표적에 의해 수신된 데이터벡터의 cross spectral density matrix(CSDM)에서 CLEAN 알고리즘을 기반으로 표적 각각의 데이터벡터를 분리 추출하여 CSDM을 산출하고 이를 비선형 프로세서인 최소분산프로세서에 적용함으로써 표적 상호간의 부엽들을 제거하여 표적의 수와 위 치를 정확히 추정 할 수 있는 방법을 제안한다.

• 정보학연구
• /
• 제4권3호
• /
• pp.77-86
• /
• 2001

본 논문에서는 접지평면위에 2개의 유전체 층을 가지는 저항띠 격자구조에서의 전자파 산란 문제를 수치해석 방법으로 잘 알려진 PMM 방법을 적용하여 저항띠의 저항을, 유전체층의 비유전율 및 두께, 입사각에 따라 수치해석하였다. 산란 전자계는 Floquet 모드 함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 저항띠의 경계조건은 접선성분의 전계와 스트립 위의 전류와의 관계를 위해 적용하였다. 유전체층의 비유전율 및 두께가 커질수록 정규화된 반사전력이 커짐을 알 수 있었고, 스트립 폭의 값이 왼쪽에서 오른쪽으로 가면서 큰 값으로 이동하였다. 그리고 본 논문의 저항율이 영일 때 기존의 논문과 비교하여 매우 일치하였으며, 급변점에서의 대부분의 에너지는 입사각 이외의 다른 방향으로 산란된다.

• 천문학회지
• /
• 제40권3호
• /
• pp.67-82
• /
• 2007

The basic building block of solar filaments/prominences is thin threads of cool plasma. We have studied the spectral properties of velocity threads, clusters of thinner density threads moving together, by analyzing a sequence of $H{\alpha}$ images of a quiescent filament. The images were taken at Big Bear Solar Observatory with the Lyot filter being successively tuned to wavelengths of -0.6, -0.3, 0.0, +0.3, and +0.6 ${\AA}$ from the centerline. The spectra of contrast constructed from the image data at each spatial point were analyzed using cloud models with a single velocity component, or three velocity components. As a result, we have identified a couple of velocity threads that are characterized by a narrow Doppler width($\Delta\lambda_D=0.27{\AA}$), a moderate value of optical thickness at the $H{\alpha}$ absorption peak($\tau_0=0.3$), and a spatial width(FWHM) of about 1". It has also been inferred that there exist 4-6 velocity threads along the line of sight at each spatial resolution element inside the filament. In about half of the threads, matter moves fast with a line-of-sight speed of $15{\pm}3km\;s^{-1}$, but in the other half it is either at rest or slowly moving with a line-of-sight velocity of $0{\pm}3km\;s^{-1}$. It is found that a statistical balance approximately holds between the numbers of blue-shifted threads and red-shifted threads, and any imbalance between the two numbers is responsible for the non-zero line-of-sight velocity determined using a single-component model fit. Our results support the existence not only of high speed counter-streaming flows, but also of a significant amount of cool matter either being at rest or moving slowly inside the filament.

• 센서학회지
• /
• 제13권2호
• /
• pp.128-132
• /
• 2004

Short wave infrared (SWIR) photovoltaic devices have been fabricated from metal organic vapour phase epitaxy (MOVPE) grown n- on p- HgCdTe films on GaAs substrates. The MOVPE grown films were processed into mesa type discrete devices with wet chemical etching employed for meas delineation and ZnS surface passivatlon. ZnS was thermally evaporated from effusion cell in an ultra high vacuum (UHV) chamber. The main features of the ZnS deposited from effusion cell in UHV chamber are low fixed surface charge density, and small hysteresis. It was found that a negative flat band voltage with -0.6 V has been obtained for Metal Insulator Semiconductor (MIS) capacitor which was evaporated at $910^{\circ}C$ for 90 min. Current-Voltage (I-V) and temperature dependence of the I-V characteristics were measured in the temperature range 80 - 300 K. The Zero bias dynamic resistance-area product ($R_{0}A$) was about $7500{\Omega}-cm^{2}$ at room temperature. The physical mechanisms that dominate dark current properties in the HgCdTe photodiodes are examined by the dependence of the $R_{0}A$ product upon reciprocal temperature. From theoretical considerations and known current expressions for thermal and tunnelling process, the device is shown to be diffusion limited up to 180 K and g-r limited at temperature below this.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.86-92
• /
• 2018

건설폐기물 발생량은 매년 꾸준하게 상승하고 있으며 재활용촉진 법이 재정되어있지만 콘크리트-시멘트페이스트 간의 단체분리 저하로 인해 높은 흡수율과 낮은 밀도로 순환골재 품질 기준에 제시되어 있는 콘크리트용 순환골재로서 사용되기 어려운 실정이다. 따라서 본 연구에서는 순환골재의 품위 향상에 필수적인 몰타르 제거를 위하여 다단형 임팩트 크러셔를 사용하였다. 장비의 특성을 분석하는데 있어서 전산 모사 방법인 DEM (Discrete Element Method)를 이용하여 영상 분석을 이용한 내부 입자의 거동 특징과, 투입 입자-장비의 각 부분에 발생하는 에너지의 스펙트럼을 분석하였다. 내부벽, 가이더 및 임펠러의 힘의 크기를 발생하는 횟수에 따라 스펙트럼을 생성하여 효과적인 분석이 가능하였다. 효과적인 박리현상을 발생시키기 위하여, 저에너지 그룹의 충돌 횟수(L)와 파분쇄를 발생시키는 고에너지 그룹의 충돌 횟수(H)의 비율을 토대로 회전속도 900RPM의 조건이 적절함을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1088-1097
• /
• 2005

Main objectives of this study were to investigate accuracy, bias and power of linear and threshold model segregation analysis methods for detection of major genes in categorical traits in farm animals. Maximum Likelihood Linear Model (MLLM), Bayesian Linear Model (BALM) and Bayesian Threshold Model (BATM) were applied to simulated data on normal, categorical and binary scales as well as to disease data in pigs. Simulated data on the underlying normally distributed liability (NDL) were used to create categorical and binary data. MLLM method was applied to data on all scales (Normal, categorical and binary) and BATM method was developed and applied only to binary data. The MLLM analyses underestimated parameters for binary as well as categorical traits compared to normal traits; with the bias being very severe for binary traits. The accuracy of major gene and polygene parameter estimates was also very low for binary data compared with those for categorical data; the later gave results similar to normal data. When disease incidence (on binary scale) is close to 50%, segregation analysis has more accuracy and lesser bias, compared to diseases with rare incidences. NDL data were always better than categorical data. Under the MLLM method, the test statistics for categorical and binary data were consistently unusually very high (while the opposite is expected due to loss of information in categorical data), indicating high false discovery rates of major genes if linear models are applied to categorical traits. With Bayesian segregation analysis, 95% highest probability density regions of major gene variances were checked if they included the value of zero (boundary parameter); by nature of this difference between likelihood and Bayesian approaches, the Bayesian methods are likely to be more reliable for categorical data. The BATM segregation analysis of binary data also showed a significant advantage over MLLM in terms of higher accuracy. Based on the results, threshold models are recommended when the trait distributions are discontinuous. Further, segregation analysis could be used in an initial scan of the data for evidence of major genes before embarking on molecular genome mapping.

• 대한교통학회지
• /
• 제27권1호
• /
• pp.169-177
• /
• 2009

본 연구에서는 SLM(Square Lattice Model)과 HLM(Hexagonal Lattice Model)을 개선하여 만든 RHLM(Rotated Hexagonal Model)을 제시하고, 이를 이용하여 양방향 보행 교통류의 시뮬레이션 모형을 개발하였다. $20{\times}20$의 400개 셀에서 진행되었으며, 시간의 변화에 따른 속도, 밀도, 교통류율로 평가하였다. 본 모형을 같은 조건에서 SLM과 비교해본 결과, 기존의 모형이 보행자의 움직임이 불필요한 동작과 비논리적 방향으로 이동하는 것을 모형에 반영하였다면, 본 모형은 보행자의 직진 움직임과 자연스러운 회피 방법을 통해 보행교통류의 최단경로 움직임을 표현할 수 있었다. 또한 보행교통류의 더 높은 곳에서 용량을 가지고 보행을 할 수 있는 현상을 반영할 수 있었고, 보행교통류의 경우 밀도가 높아지더라도 속도가 0이 되는 상황은 잘 일어나지 않는 것을 반영할 수 있음을 알 수 있었다.