• Journal of Korean Clinical Nursing Research
• /
• v.18 no.3
• /
• pp.368-380
• /
• 2012

Purpose: The purpose of this study was to evaluate the effects of a home-based video exercise program on cancer-related fatigue, physiological and psychological status in patients with colon and rectal cancers undergoing chemotherapy. Methods: The study design was a non-equivalent control group non-synchronized design. Data were collected from patients with colo-rectal cancers in Yonsei cancer center from July 5th to October 31st in 2011. There were 40 participants; 20 in the experimental group and 20 in the control group. The structured questionnaire was used to measure fatigue, physical function and emotional status. Data were analyzed using SPSS 18.0 and a chi-squre test, Fisher's exact test, Mann-Whitney U test and Wilcoxon signed- rank test were conducted to examine the homogeneity and the research hypotheses. Results: There was a statistically significant difference in White Blood Cell count in the experimental group compared with that of the control group. The exercise group showed a slight decrease of White Blood Cell count compared with that of the control group after 4 week program (z=-2.935, p=.003). However, there were no significant differences in fatigue, physiological and psychological status between the two groups. Conclusion: In this study, the developed video exercise program was effective in markedly slightly decreasing White Blood Cell count in patients with colo-rectal cancers undergoing chemotherapy. Therefore, utilizing the video exercise program can be an useful method to promote health among patients with cancer in clinical practice.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.437-444
• /
• 2009

The purpose of this study was to evaluate the physical properties of different automixing resin cements and the shear bond strength on dentin. For this study, two self-adhesive automixing resin cement(Rely-X Unicem(3M ESPE, St. Paul, USA), Embrace resin cement(Pulpdent, Oakland, USA)) and one chemical polymerizing resin cement(Resiment Ready-Mix(J.L.Blosser Inc., Liberty Missouri, USA)) were used. To evaluate the physical properties, compressive strength, diametral tensile strength and flexural strength were measured. The specimens were fabricated using Teflon mould according to manufacturers' instructions and stored for 24 hours in an atmosphere of 100% humidity. To evaluate the shear bond strength on dentin, each cements were adhered to buccal dentinal surface of extracted human lower molars in 2mm diameter. Physical properties and shear bond strengths were measured using universal testing machine(Z010, Zwick GmbH, Ulm, Germany) at a crosshead speed of 0.5mm/min. The physical properties and shear bond strength of different automixing resin cements were statistically analyzed and compared between groups using One-way ANOVA test and Schffe post-hoc test at the 95% level of confidence. The result shows that chemical polymerizing automixing resin cement represents the relatively higher physical properties and shear bond strength than self-adhesive automixing resin cements.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.1-8
• /
• 2017

Purpose: The purpose of this study is to compare the accuracy of the CT guided implant template that was produced by using an intraoral scanner according to the edentulous distance. Materials and methods: Five maxillary casts were fabricated using radiopaque acrylic resin with the second premolars, first molars, and second molars missing. Then a virtual cast was acquired by scanning each resin cast. Implant treatment was planned on the missing sites by superimposing the presurgical CT DICOM file and the virtual cast. Then the implants were placed using a surgical template followed by postsurgical CT scan. The distance and angle of the platform and apex between the presurgical implant and postsurgical implant were measured using the X, Y, and Z axis of the superimposed presurgical CT and postsurgical CT via software followed by statistical analysis using Kruskall-Wallis test and Mann-Whitney test. Results: The implant placement angle error increased towards the second molars but there was no statistically significant difference. The implant placement distance error at the platform and apex also increased towards the second molars and there was a statistically significant error at the second molars. Conclusion: Although the placement angle had no statistically significant difference between the presurgical implant and postsurgical implant, the placement distance at the platform and apex showed a larger error and a statistically significant difference at the second molar implant.

• Journal of Korean Academy of Nursing
• /
• v.50 no.1
• /
• pp.66-80
• /
• 2020

Purpose: This study aims to examine the effects of nursing interventions based on the Extended Theory of Planned Behavior (ETPB) regarding self-efficacy for exercise (SEE), physical activity (PA), physical function (PF), and quality of life (QOL) in patients with lung cancer who have undergone pulmonary resection. Methods: This quasi-experimental study was conducted between July 2015 and June 2018 in two university-affiliated hospitals. The intervention included pre-operative patient education, goal setting (action and coping planning), and feedback (behavior intention and perceived behavioral control). The intervention group (IG) (n=51) received nursing interventions from the day before surgery to 12 months after lung resection, while the comparison group (CG) (n=36) received usual care. SEE, PA, PF (dyspnea, functional status, and 6-minute walking distance [6MWD]), and QOL were measured before surgery and at one, three, six, and 12 months after surgery. Data were analyzed using the χ² test, Fisher's exact test, Mann-Whitney U test, t-test, and generalized estimation equations (GEE). Results: There were significant differences between the two groups regarding SEE (χ²=13.53, p=.009), PA (χ²=9.51, p=.049), functional status (χ²=10.55, p=.032), and 6MWD (χ²=15.62, p=.004). Although there were no time or group effects, the QOL mental component (Z=-2.78, p=.005) of the IG was higher than that of the CG one month after surgery. Interventions did not affect dyspnea or the QOL physical component. Conclusion: The intervention of this study was effective in improving SEE, PA, functional status, and 6MWD of lung cancer patients after lung resection. Further extended investigations that utilize ETPB are warranted to confirm these results.

• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.483-489
• /
• 2011

Objectives: The purpose of this study was to examine the effect of glycerin topical application on the surface hardness of composite after curing. Materials and Methods: A composite (Z-250, 3M ESPE) was packed into a disc-shaped brass mold and light cured according to one of the following protocols. Group 1 (control) was exposed to air and light cured for 40 sec, group 2 was covered with a Mylar strip and light cured for 40 sec, group 3 was surface coated with glycerin and light cured for 40 sec, and group 4 was exposed to air and light cured for 20 sec and then surface coated with glycerin and cured for additional 20 sec. Twenty specimens were prepared for each group. The surface hardnesses of specimens were measured with or without polishing. Five days later, the surface hardness of each specimen was measured again. Data were analyzed by three-way ANOVA and Tukey's post hoc tests. Results: The surface hardnesses of the unpolished specimens immediately after curing decreased in the following order: group 2 > 3 > 4 > 1. For the polished specimens, there was no significant difference among the groups. Within the same group, the hardness measured after five days was increased compared to that immediately after curing, and the polished specimens showed greater hardness than did the unpolished specimens. Conclusions: The most effective way to increase the surface hardness of composite is polishing after curing. The uses of a Mylar strip or glycerin topical application before curing is recommended.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1097-1102
• /
• 2008

Paraoxonase-1 (PON1), like lipoprotein lipase (LPL), plays a key role in the metabolism and physiology of mammalian growth. The objectives of this study were to estimate the allele and genotype frequencies at the PON1/EcoRV and PON1/AluI loci in three genetic groups of beef cattle and to determine associations between these polymorphisms and growth and carcass traits. Genotyping was performed on 30 Angus, 32 Hereford and 26 Simmental. The association analysis was carried out using the GLM procedure of SAS 9.1 and the least squares means of the genotypes were compared by the Tukey's test. Animals with AG genotype at the PON1/EcoRV locus had higher weight at the time of entry into the fattening corrals ($329.97{\pm}6.08kg$) and close to the time of slaughter ($577.56{\pm}8.32kg$) and net meat weight ($275.89{\pm}4.05kg$) and fitted tenderness ($3.10{\pm}0.19kg$) (p<0.05). Animals with AA genotype at the PON1/AluI locus had higher weight at the time of entry ($333.37{\pm}8.93kg$) and slaughter ($576.82{\pm}13.18kg$) and net meat weight ($275.49{\pm}6.43kg$) and average daily gain ($0.68{\pm}0.02kg/d$) (p<0.05). The meat color score was also significantly higher (p<0.05). Between genotypes and breeds, there were significant differences observed except for TBW, REMG, MBS, REA and MCS. As a metabolism gene, genotypes of the SNPs of PON1 gene might be reflecting BFT directly, such as $A_eA_eG_aG_a$ genotype in this experiment.

• Korean Journal of Veterinary Service
• /
• v.43 no.3
• /
• pp.147-154
• /
• 2020

Standard samples were prepared for this study, and applied for BactoScan^TM and BactoCount^TM in order for quality control evaluation for total bacterial count in raw milk. Accordingly, the preparation of two lots of standard samples for quality control were lyophilized, which contain Lactobacillus lactis. The standard samples were prepared into three different levels of bacterial counts, those were Low 30,000~40,000, Medium 70,000~90,000, High 150,000~220,000 CFU/mL, respectively. Then, the proficiency tests were performed in total 19 laboratories for measuring total bacterial counts. The total bacterial counts in the standard samples showed 37~42, 82~105, 214~240 CFU/mL in the first lot, and it showed 30~36, 67~75, 131~163 CFU/mL in the second lot in low, medium and high levels, respectively. Based on these results, the absolute values of z-scores of six standard samples in 18 laboratories were ≤2, which means the samples are satisfactory. However, z-score in one laboratory was ≤3, which means the sample is questionable. Using two standard samples, the correlation between BactoScan^TM and BactoCount^TM was 0.9982, which means the results of total bacterial count measurement of both equipment were equivalent. Therefore, the standard samples manufactured in this study for quality control of total bacterial count using BactoScan^TM and BactoCount^TM in the raw milk could be applied to proficiency tests.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.182-191
• /
• 2007

Objective: The purpose of this study was to evaluate the validity of midsagittal reference (MSR) planes constructed in maxillofacial 3D images. Methods: Maxillofacial computed tomography (CT) images were obtained in 36 normal occlusion individuals who did not have apparent facial asymmetry, and 3D images were reconstructed using a computer software. Six MSR planes (Cg-ANS-Ba, Cg-ANS-Op, Cg-PNS-Ba, Cg-PNS-OP, FH${\perp}$(Cg, Ba), FH${\perp}$(Cg, Op)) were constructed using the landmarks located in the midsagittal area of the maxillofacial structure, such as Cg, ANS, PNS, Ba and Op, and FH plane constructed with Po and Or. The six pairs of landmarks (Z, Fr, Fs, Zy, Mx, Ms), which represent right and left symmetry in the maxillofacial structure, were selected. Statistically significant differences of the right and the left measurements were examined through t-test, and the difference of the right and the left measurement was compared among the six MSR planes. Results: The distances from the right and the left landmarks in each pair to each MSR plane did not show a statistically significant difference. The reproducibility of the landmark identification was excellent. Conclusion: All the six planes constructed in this study can be used as a MSR plane in maxillofacial 3D analysis, particularly, the planes including Cg and ANS.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.117-126
• /
• 2018

The purpose of this study is to analyze the spatial distribution characteristics and spatial changes of Automatic Weather Stations (AWS) in mountainous areas with altitude more than 200 meters in South Korea. In order to analyze the spatial distribution patterns, spatial analysis was performed on 203 Automatic Mountain Meteorology Observation Station (AMOS) points from 2012 to 2016 by Euclidean distance analysis, nearest neighbor index analysis, and Kernel density analysis methods. As a result, change of the average distance between 2012 and 2016 decreased up to 16.4km. The nearest neighbor index was 0.666632 to 0.811237, and the result of Z-score test was -4.372239 to -5.145115(P<0.01). The spatial distributions of AMOSs through Kernel density analysis were analyzed to cover 129,719ha/a station in 2012 and 50,914ha/a station in 2016. The result of a comparison between 2012 and 2016 on the spatial distribution has decreased about 169,399ha per a station for the past 5 years. Therefore it needs to be considered the mountainous regions with low density when selecting the site of AMOS.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.7
• /
• pp.80-89
• /
• 2015

Nitrate is on the most seriou pollutant encountered in shallow groundwater aquifer in agricultural area. There are various remediation technologies such as ion exchange, reverse osmosis, and biological denitrification to recover from nitrate contamination. Biological denitrification by indigenous microorganism of the technologies has been reviewed and applied on nitrate contaminated groundwater. In this work, we selected the site where the annual nitrate (NO₃⁻) concentration is over 105 mg/L and evaluated denitrification process with sampled soil and groundwater from 3 monitoring wells (MW4, 5, 6). In the results, the nitrate degradation rate in each well (MW 4, 5, and 6) was 25 NO₃⁻ mg/L/day, 6 NO₃⁻ mg/L/day, and 3.4 NO₃⁻ mg/L/day, respectively. Nitrate degradation rate was higher in batch system treated with 2 times higher fumarate as carbon source than control batch system (0.42M fumrate/1M NO₃⁻), comparing with batch system with soil sample. This result indicates that increase of carbon source is more efficient to enhance denitrification rate than addition of soil sample to increase microbial dynamics. In this work, we also confirmed that monitoring method of functional genes (nirK and nosZ) involved in denitrification process can be applied to evaluated denitrifcation process possibility before application of field process such as in-situ denitrification by push-pull test.