• Journal of Biosystems Engineering
• /
• v.35 no.4
• /
• pp.224-230
• /
• 2010

The purpose of this study was to develop position control system of an electric actuator for automatic shuttle shifting of a tractor. The electric actuator was installed at the link of the forward-reverse gearshift of the tractor transmission, and controlled in the ranges of forward, neutral, and reverse positions. The position control system of the electric actuator was developed based on PID (Proportional Integral Derivative) controller and transfer function of the electric actuator. The coefficients of the PID controller were determined by Ziegler-Nichols (Z-N) method and optimized using simulation program. The prototype AMT (Automated Manual Transmission) test unit of the tractor was installed and used to evaluate the performance of the position control. The evaluation system for the control performance consisted of forward-reverse actuator, motor driver, and controller. The tests were conducted as the controlled positions of the actuator were changed from neutral position to forward, neutral, and reverse positions in sequence. The sequential tests were repeated 20 times. The operations of changing the gearshift were considered as the step response of the control system. Maximum overshoot, settling time, and steady-state error were analyzed. The results showed that performance of the position control system was reasonable and qualified. The maximum overshoots, the steady-state errors, and the settling times of the position control system were 10~20%, 1~5%, and 0.92~1.49 sec, respectively. The modifications of the electric actuator will be required to enhance the performance of position control during field operation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1587-1593
• /
• 2007

A single factorial experiment was conducted to test the effects of three dietary levels of energy on mRNA expression of fatty acid synthase (FAS-mRNA) and hormone-sensitive lipase (HSL-mRNA) and their association with intramuscular fat in finishing pigs. 72 crossbred (Large $White{\times}Rongchang$) barrows with an average initial body weight of 20.71 (s.e. 0.1) kg, were randomly allotted to three dietary treatments (11.75, 13.05 and 14.36 MJ DE/kg) and fed until slaughtered at 100 or 101 kg. The diets were iso-nitrogenous and iso-essential amino acids. The growth performances including the duration of finishing were changed linearly (p<0.05) or quadratically (p<0.05) with increased dietary energy levels. The effects of dietary energy content on the percentage of external fat, intramuscular backfat and the fat thickness were linear (p<0.05). The content of dietary energy increased FAS-mRNA linearly or quadratically, while HSL-mRNA decreased linearly or quadratically in backfat and Longissmus dorsi muscle. Meanwhile, significant positive correlations (p<0.05) were found between energy level and intramuscular fat, FAS-mRNA or the ratio of FAS-mRNA to HSL-mRNA, between the ratio of FAS-mRNA to HSL-mRNA and intramuscular fat. However, the correlations between HSL mRNA and dietary energy or intramuscular fat were negative (p<0.05). The results indicated that dietary energy level regulates lipid accumulation, especially intramuscular fat, possibly by modulating the mRNA of FAS and HSL together rather than individually.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.177-187
• /
• 2008

Objectives : This study was performed to analyze the effective components of essential oil obtained from Yongdamsagantang, which has been efficacious against leukorrhea in gynecologic diseases. Methods : I obtained the essential oils of Yongdamsagan-tang by hydrodistillation extraction method and supercritical fluid extraction(SFE) method, and then I analyzed those by GC/MS(Gas Chromatography/Mass Spectrum). Results : 1. The optimum SFE(Supercritical Fluid Extraction) condition was obtained in the following experiment conditions: pressure 200atm, temperature $45^{\circ}C$, duration of extraction 25minutes. 2. With GC(Gas Chromatography) and GC/MS(Gas Chromato- graphy/Mass Spectrum) analysis, I identified 37 compounds in the Yongdamsagan-tang's essential oil obtained through the SFE method. The main compounds were as follows : 3-Methyl-but-2-enoic acid,2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H -pyrano[3,2-g]chromen-3-yl ester(49.81%), (Z)-6-Pentadecen-1 -ol(3.19%), (-)-Spathulenol(2.40%). 3. I identified 4 compounds in the Yongdamsagan-tang's essential oil obtained through the hydrodistillation method. The main compounds were as follows : 3-Methyl-but-2-enoic acid, 2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H-pyrano [3,2-g]chromen-3-yl ester(2.61%). 4. 3-Methy I-but-2-enoic acid, 2,2-dimethyl-8-oxo-3,4-dihydro-2H,8H-pyrano[3,2-g] chromen-3-yl ester, all were identified in both the SFE method and the hydrodistillation method, but the others were not identified in common. 5. I also conducted an additional test in order to examine the essential oil's antimicrobial action against bacteria. Both MIC(Minimum Inhibitory Concentrations) and MBC(Minimum Bactericidal Concentrations) were $0.125mg/m{\ell}$ against N. meningitidis, however MIC and MBC were $1.0mg/m{\ell}$ in antimicrobial action against 12 different genera of bacteria.

• Journal of Korean Academy of Nursing
• /
• v.45 no.5
• /
• pp.661-670
• /
• 2015

Purpose: The purpose of this study was to examine the mediation of psychological distress in the relationship between disturbance in ADL from chemotherapy induced peripheral neuropathy and quality of life in order to provide a basis for planning nursing interventions to improve the quality of life in cancer patients. Methods: A purposive sample of 130 patients treated with chemotherapy were recruited in the cross-sectional survey design. Data were collected using self-report questionnaires. The instruments were the Chemotherapy Induced Peripheral Neuropathy Assessment Tool (CIPNAT), Hospital Anxiety Depression Scale (HADS), and Functional Assessment of Cancer Therapy-General (FACT-G). Results: The mean score for disturbance in ADL from chemotherapy induced peripheral neuropathy was 3.30. Overall quality of life was 2.48. The mean score was 1.04 for psychological distress. The prevalence was 35.4% for anxiety and 47.7% for depression. There were significant correlations among the three variables, disturbance in ADL from chemotherapy induced peripheral neuropathy, psychosocial distress, and quality of life. Psychosocial distress had a complete mediating effect (${\beta}$= -.74, p <.001) in the relationship between disturbance in ADL from chemotherapy induced peripheral neuropathy and quality of life (Sobel test: Z= -6.11, p <.001). Conclusion: Based on the findings of this study, nursing intervention programs focusing on disturbance of ADL management, and decrease of psychological distress are highly recommended to improve quality of life in cancer patients.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.65-76
• /
• 1987

This study has been carried out as a basic course for the analysis of foundation deformations based on the Cap model using the finite element methods. Material parameters should firstly be determined in order to use the Cap model for numerical solution. Associated with the fact described above, a method determining the soil parameters is suggested using algorithm for numerical ana])isis from raw truly triaxial compression laboratory test data of Pueblo.Colorado sand by Zaman, et at. (1982) More specifically, the change of soil parameters Is thoroughly examined by weighting the data obtained from CTC and RTE tests, respectively. The main results obtained are as follows; 1. The obtained values of parameters (E, V and 2) are same irrespective of data obtained from various kind of tests. 2. The values of the other parameters are dependent on data used. 3. The determination of parameters is little affected by the weighting factor.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.24 no.2
• /
• pp.127-136
• /
• 2018

Purpose: The purpose of this study was to examine the effects of self-regulated learning ability of freshmen in nursing college on the learning persistence intention, and to determine if their learning motivation meditates the relationship between them. Methods: The study design was based on descriptive research. Data were collected from 146 nursing freshmen studying at a university in D city from June 5, 2017 to June 7, 2017. Results: There was a positive correlation among learning persistence intention, self-regulated learning ability (r=.57, p<.001) and learning motivation (r=.60, p<.001). Also, it was found that learning motivation was positively correlated with self-regulated learning ability (r=.79, p<.001). According to the Sobel test results, the learning motivation had a complete mediating effect (${\beta}=.39$, p<.001) between self-regulated learning ability and learning persistence intention (Z=3.63, p<.001). Conclusion: Therefore, this study suggests developing a learning motivation program to improve self-regulated learning ability and learning persistence intention of nursing students during their freshman year.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.1
• /
• pp.91-100
• /
• 1990

In most of the structural members with initial cracks(or initial notches), the strength tends to decmase as the member size increases. This phenomenon is known as size effect. Among the structural materials of glass, metal or concrete, etc., concrete represents the size effect even without initial crack. According to the previous size effect law, the concrete mem¬ber of very large size can resist little stress. Actually, however, even the large size member can resist some stress if there is no initial crack made artificially, consequently showing a rather milder strength reduction compared to the severe strength reduction by tbe previously derived size effect law. In this study, the theoretical size effect law previously derived by Z.P. Bazant was discussed based on nonlinear fracture mechanics of concrete structures With dissimilar initial cracks, and the prediction models are proposed by regression analysis with the existing test data of more large size speciments for splitting tensile strength, shear strength and uniaxial compressive strength tests.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2015

Zelkova serrata is an important hardwood species for the timber industry in Japan. Tree breeding programs for this species have mainly focused on growth characteristics such as stem diameter (D), tree height (TH), stem form, and branching. In order to fulfill timber industry needs, wood quality improvement should be included in the tree breeding program of this species. In the present study, growth characteristics, such as D and TH, and the stress-wave velocity (SWV), which is highly correlated with Young's modulus of wood, were measured for 20-year-old Z. serrata from eight half-sib families planted in a progeny test site with three different initial spacings. Significant differences in all the measured characteristics were found among the eight half-sib families. The variance components of the half-sib families for D, TH, and SWV were 27.2%, 47.3%, and 33.5%, respectively. These results indicate that all the measured characteristics of this species could be improved by tree breeding programs. In addition, only low correlation coefficients were obtained between the growth characteristics and SWV, indicating that extensive selection on SWV in tree breeding programs may not always lead to a reduction in yield volume.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.425-438
• /
• 2016

This study carried out zeta potential measurements of the Microcystis sp. under various solutions condition and investigated the characteristics of Microcystis sp. through the size control of microbubbles to eliminate algae that causes problems in aquatic ecosystems and human activities. DAF process was adopted and several coagulants were used to remove the Microcystis sp. CCD Camera was used to measure and analyze the size of microbubble, and fluorescent microscope was used to observe the particle, algae species and community. Zeta potential behavior of the algae was analyzed by using ELS-Z. Lab-scale and pilot-scale experiments were conducted to test flotation process. Polyaluminium chloride(PAC) coagulant was used, and the removal efficiency of the algae was assessed through Chlorophyll-a analysis. In the Lab-scale experiment, 2.2 ppm, 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride was injected to coagulate the algae. The coagulated algae was floated by the microbubble. The microbubbles in the experiments were generated at a air pressure of 450 ~ 550 kPa. The microbubble size was controlled in $36{\mu}m$, $100{\mu}m$, and $200{\mu}m$, respectively by using different diffuser. The results of lab-scale experiments on flotation plant indicated that the average removal rate was about 90% or above for 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride. On the other hand, in the pilot-scale experiment, the removal efficiency was in the range of 85% to 95% in all dose ranges of polyalumium chloride and aluminium sulfate coagulants.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.69-81
• /
• 2005

The objective of this study was to evaluate the toothbrush abrasion characteristics of class V restorations. Thirty extracted human premolars, which were collected from oral surgery clinics were used. We mounted five teeth in a metal ring mold of 50 mm in diameter and 15 mm in height using chemically cured acrylic resin. Class V cavities were prepared in lingual cervical root surfaces and restored using one of following restorative materials : Dentin Conditioner/Fuji II LC (Group FL), All Bond II/Z-250 (Group ZT), One-up Bond F/Palfigue Estelite (Group PE), F2000 Primer/Adhesive (Group FT), and Prime & Bond 2.1/Dyract AP (Group DR). They were stored under distilled water at $37^{\circ}C$ for seven days. The toothbrush abrasion test was conducted using a wear testing machine of pin-on disk type under a load of 1.5 N for 100,000 cycles. We have examined the bonded interfaces, the changes of surface roughness and color of abraded surfaces. From this experiment, the following results were obtained. 1. The change of surface roughness showed high degree: RMGIC>compomer>composite resin (p<0.05). 2. Because of the protrusion and missing of filler particles, SEM observation of abraded surfaces of RMGIC and compomers revealed the increase of surface roughness due to the selective removal of matrix resin. 3. The color change by toothbrush abrasion was affected in large part by the change of $L^*$ and $b^*$ of resin composites (p<0.05). 4. The color change by toothbrush abrasion was so small to detect by human eyes. 5. SEM observation of abraded surfaces revealed the interface bonding was the best in the FT group.