• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.365-373
• /
• 2005

There is increasing need for high-strength steel especially for the high-rise steel building structure. High- strength steels, however, may have mechanical properties that are significantly different from those of the conventional steels.The application of high-strength steels to building structures should be reviewed as to whether inelastic behavior equivalent to that of conventional steels can be attained or not. In this study, SM570TMC steel, which was developed recently in Korea, was tested to evaluate mechanical properties and welding characteristics for use as a structural steel. Yield phenomenon of SM570TMC steel, which is continuous yielding, is quite different from that of conventional steel. The distributions of yield strength of SM570TMC steel were uniform regardless of thickness, while the minimum yield strength was 440MPa. Also, the flat distributions of hardness in z-direction were found to comprise one of the important properties. Results of the charpy impact tests at -5oC revealed toughness values of SM570TMC steel, which were higher than those of equivalent as rolled steel. Carbon equivalent(Ceq) values of SM570TMC steel, which were related to welding performance, were lower than those of equivalent as rolled steel.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.1
• /
• pp.83-96
• /
• 2000

With the increased use of computers in medical fields, we can consider introducing computer mediated communication into the area of patient care such as medical or health counseling and education. But little was known about what problems can be counseled, what is the main direction of counseling, and what difficulties are met during the computer mediated counseling. So I conducted this study. This is a fundamental study concerning the health counseling by the inter-net. In this study, medical counseling using a method of questioning -answering through a computer mediated communication system was carried out from June 1998 to May 1999. I analyzed the contents of questions and answers by the ICPC classification. The ICPC classification emerged as a standard for information categorization in Primary Health Care within a few years. One of the most prominent features of this classification is the inclusion of the complaints of the patients (symptoms & complaints) and the social problems (Chapter Z). Thus, and for the first time, the demand of patients may be assessed such as it is expressed in the reality. The ICPC list is now an international standard whose validity is not questioned any more. It is translated in more than twenty different languages. The data collected were analyzed by descriptive statistical method, c2 test by cross tabulations. Followings are the results of this study. 1. The 3,054 users composed of 64% of males and 36% of females. The highest number of users was showed in the age group of $25{\sim}29$ (39.4%). 2. During the one-year period, the average number of counseling per user was 2.5 cases and per day was 21.1 cases. 3. In classifying symptoms and complaints by 17 chapter, digestive(17.6%), general and unspecified (12.7%), skin(12.7%) and musculoskeletal system (9.6%) were most common questions. 4. The distribution of diagnosis by 17 chapter, general and unspecified (21.4%), digestive (15.3%), skin (11.9%) and mus- culoskeletal system (8.9%) were most common answers. 5. Many users wanted to know symptoms and complaints(3,609 cases), treatment principles (2,928 cases), prognosis and preventive methods for health problems which were previously diagnosed (284 cases).

• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.670-681
• /
• 2012

Herb extracts commercially used in Korea were screened for PPAR-${\gamma}$ agonist test and ${\alpha}$-glucosidase inhibition assay. Total 16 herb plants had a PPAR-${\gamma}$ agonist activity. Specially, Alisma orientale Juz (108.41%), Ephedra sinica (98.22%), Sasa japonica Makino var. purpurascens Nakai (140.68%), Astragalus membranaceus Bunge (106.79%) and Cnidium officinale Makino (113.00%) showed high PPAR-${\gamma}$ agonist activity rate compared with rosiglitazone's (167.46%). And Cornus officinalis S. et Z. (90.3%), Cinnamomum cassia Blume (89.2%), Psoralea corylifolia L. (89.8%), Paeonia japonica (Makino) Miyabe (92.4%) and Paeonia suffruticosa Andr (93.2%), showed high ${\alpha}$-glucosidase inhibition rates. These results support previous reports of the efficacy of Oriental medicinal plants used for diabetes mellitus.

• Computers and Concrete
• /
• v.8 no.2
• /
• pp.193-206
• /
• 2011

The use of Carbon Fiber Reinforced Polymers (CFRP) to strengthen reinforced concrete beams under bending and shear has gained rapid growth in recent years. The performance of shear strengthened beams with externally bonded CFRP laminate or fabric strips is raising many concerns when the beam is loaded under cyclic loading. Such concerns warrant experimental, analytical and numerical investigation of such beams under cyclic loading. To date, limited investigations have been carried out to address this concern. This paper presents a numerical investigation by developing a nonlinear finite element (FE) model to study the response of a cantilever reinforced concrete T-beam strengthened in shear with side bonded CFRP fabric strips and subjected to cyclic loading. A detailed 3D nonlinear finite element model that takes into account the orthotropic nature of the polymer's fibers is developed. In order to simulate the bond between the CFRP sheets and concrete, a layer having the material properties of the adhesive epoxy resin is introduced in the model as an interface between the CFRP sheets and concrete surface. Appropriate numerical modeling strategies were used and the response envelope and the load-displacement hysteresis loops of the FE model were compared with the experimental response at all stages of the cyclic loading. It is observed that the responses of the FE beam model are in good agreement with those of the experimental test. A parametric study was conducted using the validated FE model to investigate the effect of spacing between CFRP sheets, number of CFRP layers, and fiber orientation on the overall performance of the T-beam. It is concluded that successful FE modeling provides a practical and economical tool to investigate the behavior of such strengthened beams when subjected to cyclic loading.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.255-277
• /
• 1987

부정교합(不正交合)의 발생요인(發生要因)의 하나로서 비인두강(鼻咽頭腔)의 협착(狹窄)이 거론(擧論)되어 왔다 본(本) 연구(硏究)는 안면골격(顔面骨格)의 형태결정(形態決定)에 비인두강(鼻咽頭腔)의 기여정도(寄與程度)를 파악(把握)하고자 함에 있다 연구자료(硏究資料) 및 방법안(方法安) 한국인(韓國人) 성인(成人) 남녀(男女) 156 명(名)의 측모두부X선규격사진(側貌頭部X線規格寫眞)을 사용(使用)하여 NEC PC-9801 VM2 Personal Computer와 Oscon GT-4000 Digitizer에 의한 data 입력(入力)을 행(行)한 후 통계처리(統計處理)를 행(行)하였다 통계처리(統計處理)로서는 각계측치(各計測値)에 대하여 남녀별(男女別)로 평균치(平均値), 표준편차치(標準偏差値)를 산출(算出), Student's t-test를 행(行)하고, 비인두강(鼻咽頭腔) 계측항목(計測項目)과 안면골격(顔面骨格)의 각(各) 계측치간(計測値間)의 상관관계(相關關係)의 검토(檢討)를 행(行)하였다 결(結) 과(果) 1 남녀(男女)의 성차(性差)로서, 여자(女子)보다 남자(男子)가 상악골(上顎骨)에 대해 하악골(下顎骨)이 돌출(突出)되어 있었으며, 안면고(顔面高)가 컸다 2 Ba-S-PNS와 S-PNS-Ba간(間)에 부(負)의 상관(相關)이 인정(認定)되어, 이 두 계측치간(計測値間)애 상호작용(相互作用)이 있는 것으로 판단 되었다 3 비인두강(鼻咽頭腔)의 깊이는 하악(下顎)의 전후위치관계(前後位置關係)와 유의(留意)한 상관관계(相關關係)를 보였다 4 비인두강(鼻咽頭腔)의 깊이와 안면(顔面)의 깊이와는 관련성(關聯性)이 없는 것으로 판단 되었다 5 비인두강(鼻咽頭腔)의 깊이와 안면고간(顔面高間)에 유의(有意)한 부(負)의 상관(相關)이 시사(示唆)되었다 6 비인두강(鼻咽頭腔)의 고경(高經)과 안면고간(顔面高間)에 유의(有意)한 상관관계(相關關係)가 인정(認定)되었다.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.22-30
• /
• 2012

Objectives: To challenge the problem of slipperiness, various slipmeters have been developed to assess slip hazard. The performance of in-situ slipmeter is, however, still unclear under the various floor conditions. The main objectives of this study were to evaluate the performance of three kinds of slipmeters under real conditions, and to find their dynamic and kinematic characteristics, which were compared with gait test results. Methods: Four common restaurant floor materials were tested under five contaminants. Slipmeters and human gaits were measured by high speed camera and force plate to find and compare their dynamic and kinematic characteristics. Results: The contact pressures and built-up ratio were below those of subjects. The sliding velocity of British Pendulum Tester was above those of subjects, while those of BOT-3000 and English XL were below those of subjects. From the three meters, the English XL showed the highest overall correlation coefficient (r = 0.964) between slip index and $R_a$, while the rest did not show statistical significance with surface roughness parameters ($R_a$, $R_z$). The English XL only showed statistical significance (p < 0.01) between slip index and contaminants. The static coefficient of friction obtained with the BOT-3000 showed good consistency and repeatability (CV < 0.1) as compared to the results for the BPT (CV > 0.2) and English XL (CV < 0.2). Conclusion: It is unclear whether surface roughness can be a reliable and objective indicator of the friction coefficient under real floor conditions, and the viscosity of contaminants can affect the friction coefficient of the same floors. Therefore, to evaluate slipperiness, the performance of the slipmeters needed to improve.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1350-1353
• /
• 2004

To further investigate the regions on porcine chromosome 7 that are responsible for economically important traits, phenotypic data from a total of 287 F2 individuals were collected and analyzed from 1998 to 2000. All animals were genotyped for eight microsatellite loci spanning the length of chromosome 7. QTL analysis was performed using interval mapping under the line-cross model. A permutation test was used to establish significance levels associated with QTL effects. Observed QTL effects were (chromosomewide significance, position of maximum significance in centimorgans): Birth weight (<0.01, 3); Carcass length (<0.05, 80); Longissimus muscle area (<0.01, 69); Skin percentage (<0.01, 69); Bone percentage (<0.01, 74); Fat depths at shoulder (<0.05, 54);Mean fat depth (<0.05, 81); Moisture in m. Longissimus Dorsi (<0.05, 88). Additional evidence was also found which suggested QTL for dressing percentage and fat depths at buttock. This study offers confirmation of several QTL affecting growth and carcass traits on SSC7 and provides an important step in the search for the actual major genes involved in the traits of economic interest.

• Journal of Acupuncture Research
• /
• v.37 no.3
• /
• pp.177-180
• /
• 2020

Background: The aim of this study was to examine whether the effects of acupotomy therapy were beneficial for the treatment of protrusion of lumbar intervertebral disc. Methods: The number of patients (n = 80) were equally assigned into treatment group and control group. Treatment group was given acupotomy therapy twice a week, and control group was given acupuncture 3 times a week, for 4 weeks. The beneficial effect and changes in score of the Japan Orthopedic Association (JOA) for low back pain were observed. Results: Among 40 cases in the treatment group, there were 25 (62.5%) with an excellent effect, 13 (32.5%) with good effect, 1 (2.5%) with a medium effect and 1 (2.5%) with poor effect, with the total experiencing an excellent/good effect of 95.0%. Among 40 cases in the control group, there were 11 (27.5%) with an excellent effect, 17 (42.5%) with good effect, 10 (25.0%) with a medium effect, and 2 (5.0%) with poor effect, with an excellent/good rate of 70.0%. The result of the rank sum test showed Z = -4.923, p < 0.05 in the comparison, indicating a significantly better outcome following acupotomy compared with acupuncture. JOA scores increased in both groups after treatment (p < 0.05), which was more significant in the acupotomy treatment group (p < 0.05). Conclusion: Acupotomy therapy has a beneficial effect on protrusion of lumbar intervertebral disc.

• Journal of Korean Academy of Nursing
• /
• v.46 no.4
• /
• pp.475-489
• /
• 2016

Purpose: This study was a systematic review and meta-analysis designed to investigate the effects of stimulation-oriented interventions for behavioral problems among people with dementia. Methods: Based on the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA), a literature search was conducted using seven electronic databases, gray literature, and other sources. Methodological quality was assessed using the Scottish Intercollegiate Guidelines Network (SIGN) for randomized controlled trials (RCTs). Data were analyzed using R with the 'meta' package and the Comprehensive Meta-Analysis (CMA 2.0) program. Results: Sixteen studies were included for meta-analysis to investigate the effect of stimulation-oriented interventions. The quality of individual studies was rated as '++' for eight studies and '+' for the rest. The effect sizes were analyzed according to three subgroups of interventions (light, music, and others); Hedges' g=0.04 (95% CI: -0.38~0.46), -0.23 (95% CI: -0.56~0.10), -0.34 (95% CI: -0.34~0.00), respectively. To explore the possible causes of heterogeneity ($I^2=62.8%$), meta-regression was conducted with covariates of sample size, number of sessions, and length of session (time). No moderating effects were found for sample size or number of sessions, but session time showed a significant effect (Z=1.96, 95% CI: 0.00~0.01). Finally, a funnel plot along with Egger's regression test was performed to check for publication bias, but no significant bias was detected. Conclusion: Based on these findings, stimulation-oriented interventions seem to have a small effect for behavioral problems among people with dementia. Further research is needed to identify optimum time of the interventions for behavioral problems among dementia pateints.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.113-115
• /
• 2004

Six generations (P$_1$, P$_2$, F$_1$, BC$_1$, BC$_2$ and F$_2$) of four bivoltine silkworm crosses (SKAU-R-1 ${\times}$ Yakwei, SKAU-R-6 ${\times}$ Yakwei, CSR$_2$ ${\times}$ CSR$_4$ and SH$_{6}$${\times}$ NB$_4$D$_2$) were evaluated in a completely randomized block design with 5 replications for each treatment. The generation mean 2 in respect of 3 metric traits (single cocoon weight, single shell weight, and shell ratio ％), were subjected to Cavallis joint scaling test. Additive dominance model was found to be adequate in CSR$_2$${\times}$CSR$_4$ and SH$_{6}$${\times}$ NB$_4$D$_2$ for single cocoon weight and shell weight and SKAU-R-6 ${\times}$ Yakwei for shell ratio(％). Whereas, in rest of the crosses epistasis was evident in the traits under investigation. Magnitude of additive gene effect (d) was greater than dominance(h) in SH$_{6}$${\times}$NB$_4$D$_2$ and SKUA-R-6${\times}$Yakwei for shell ratio (％) and in CSR$_2$${\times}$ CSR$_4$ for shell weight. Thus selection for these traits in early segregating generations of these crosses would be effective for obtaining considerable genetic gain. gain.