• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.78-81
• /
• 2002

This paper describes on the design structure and development temperature stable strip-line junction isolator operating in above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the center frequency shift was reduced in temperature range of -20∼8O$^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1075-1078
• /
• 2002

This paper describes on the design structure and development of temperature stable strip-line function isolator operating In above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the frequency shift at center was reduced in the temperature range of -20∼80$\^{C}$.

• Electronics and Telecommunications Trends
• /
• v.18 no.6 s.84
• /
• pp.41-48
• /
• 2003

본 논문은 아이솔레이터의 소재 파라미터에 의한 삽입손실 영향에 대하여 서술하였다. 본 논문에서는 페리자성공명반치폭($\Delta$Η), 유전손실, 자계세기 그리고 포화자화에 대한 아이솔레이터 삽입손실의 관계를 알아 보았고, 또한 공진 아래 모드를 사용한 아이솔레이터의 온도안정화 연구 및 구조설계에 대하여알아 보았다. 아이솔레이터의 온도특성은 영구자석, YIG(Yttium Iron Garnet) 페라이트 그리고 공진기로사용되는 도체 등에 의한 변화에 대하여 본 논문에서는 실험시제품을 제작하여 측정 분석하였다. 측정결과 시뮬레이션 결과와 실험시제품 측정결과가 거의 일치하는 것을 알 수 있었다. 삽입손실 0.18~0.24dB, 반사손실 27dB, 아이솔레이션 27dB 그리고 대역폭 500MHz를 얻을 수 있었다. 이때 실험에 사용한 소재 파라미터는 포화자화 550G, 유전손실, $0.0004\Delta$Η20, 유전율 14로 하였다. 또한 온도안정화실험에서는 구조를 개선하여 온도안정화를 이루었다.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.203-206
• /
• 2001

The effects of SrTiO$_3$ addition and sintering temperature on the microstructure and magnetic properties of yttrium iron garnet (YIG) were investigated. The lattice Parameter increasing of sintered YlG with small amount of SrTiO$_3$ addition was supposed to be substituted $Y^{+3}$, Fe$^{+3}$ ions to Sr$^{+2}$,Ti$^{+4}$ ions which are relatively large in ionic ranius. A YIG specimen sintered at 142$0^{\circ}C$ with 0.2mol% SrTiO$_3$ showed above 98% densification of theoretical density. Saturation magnetization (M$_s$) at room temperature decreased a little bit with increasing SrTiO$_3$, addition but no great chance. In addition, the coercivity (H$_c$) was almost not changed by sintering temperature.