• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.154-166
• /
• 1999

General characteristics and life span of silkworm moth were investigated amongst 277 gene resources preserved and maintained in Korea. Silkworm varieties were classified according to the commercial characteristics and the viability of tested varieties. There were significant differences among the eight different commercial characteristics of silkworm such as whole larval period, duration of 5th instar, pupal body weight, single cocoon weight, cocoon shell weight, cocoon shell ratio, cocoon yield and longevity, Tropical race showed the longest life span among the other five geographical races, and followed by Japanese, European, Chinese and Korean race in order. In the longevity of each variety, Daizo(sdi) showed the shortest life span with 4.3days, and J037 was the longest as 16.0 days. Average longevity of female was 11.1 days as showed 3.0 days longer than that of male which was 8.2 days. Total average longevity of the whole varieties was 9.7days. In the correlation between the longevity and commercial characteristics, there was a tendency that the commercial characteristics became better when the life span was longer. According to the result of Complete Linkage Cluster Analysis, the genetic resources of 277 silkworm varieties classified into 5 groups such as “Group I”for short life span with low cocoon yielding “Group II”for middle life span with middle cocoon yielding,“Group III”for the shortest life span with low cocoon yielding, “Group IV”for high pupation rate and the highest cocoon yielding with comparatively long life span, and “Group V”for the longest life span with comparatively high cocoon yielding.

• Advances in concrete construction
• /
• 제7권2호
• /
• pp.117-126
• /
• 2019

When designing reinforced concrete (RC) members, the rebar is assumed to resist all tensile forces, but the resistance of the concrete in the tension area is neglected. However, concrete can also resist tensile forces and increase the tensile stiffness of RC members, which is called the tension stiffening effect (TSE). Therefore, this study assessed the TSE, particularly after yielding of the steel bars and the effects of the steel ratio on the TSE. For this purpose, RC member specimens with steel ratios of 2.87%, 0.99%, and 0.59% were fabricated for uniaxial tensile tests. A vision-based non-contact measurement system was used to measure the behavior of the specimens. The cracks on the specimen at the stabilized cracking stage and the fracture stage were measured with the image analysis method. The results show that the number of cracks increases as the steel ratio increases. The reductions of the limit state and fracture strains were dependent on the ratio of the rebar. As the steel ratio decreased, the strain after yielding of the RC members significantly decreased. Therefore, the overall ductility of the RC member is reduced with decreasing steel ratio. The yielding plateau and ultimate load of the RC members obtained from the proposed equations showed very good agreement with those of the experiments. Finally, the image analysis method was possible to allow flexibility in expand the measurement points and targets to determine the strains and crack widths of the specimens.

• Applied Biological Chemistry
• /
• 제17권1호
• /
• pp.1-30
• /
• 1974

수도저위(水稻低位) 생산력(生産力)의 원인구명(原因究明)에 관(關)한 영양생리학적연구(營養生理적硏究)로 여러 가지 생육조건하(生育條件下)에서 품종별(品種別) 양분흡수(養分吸收) 및 동화기능(同化機能)과 양분(養分)의 체내(體內)에서의 이행양상(移行樣相)을 추구(追究)하는 한편 고수량지(高收量地) 벼와 저수량지(低收量地) 벼에 대(對)한 생육시기별(生育時期別)로 양분(養分)의 흡수(吸收) 체내무기양분(體內無機養分)과 수량(收量) 및 수량구성요소(收量構成要素)와의 관계(關係) 등(等)을 추구(追究)하여 저수량지(低收量地) 벼의 영양생리적(營養生理的) 저수요인(低收要因)을 밝히고저 본연구(本硏究)를 수행(遂行)하였던 바 그 결과(結果)를 요약(要約)하면 다음과같다. 1. 양분(養分)의 흡수력(吸收力)은 품종(品種)에 따라 차이(差異)가 있으며 인산(燐酸) 및 가리(加里)의 흡수력(吸收力)이 강(强)한 품종(品種)은 구사부에, 진흥(振興)이며 낮은 품종(品種)은 팔달(八達)이었다. 2. 근(根)의 ${\alpha}-naphthylamine$의 산화력(酸化力)과 인산(燐酸)의 흡수력(吸收力)과는 유의적(有意的)인 상관관계(相關關係)가 있으며 산화력(酸化力)이 높으면 인산(燐酸)의 흡수(吸收)가 증대(增大)되었바. 3, 탄소동화력( 炭素同化力)은 품종(品種)에 따라 차이(差異)가 있으며 노인도(老人稻), 구대내조욱(九大耐潮組) 3호(號), 수원(水原)82호(號), 진흥(振興) 등은 강(强)하고 대구조(大脚租), 관옥(關玉), 육우(陸羽) 132호(號)가 약(弱)하였다. 4, 질소(窒素)의 증시(增施)는 소비(少肥)에 비(比)하여 동화량(同化量)은 증가(增加) 되나 등화산물(同化産物)의 이삭으로의 이전(移轉)은 적었다5. 정상(正常) 생육(生育)한 벼에 비(比)하여 인산(燐酸), 가리(加里) 및 마그네슘이 결핍(缺達)된 벼는 전탄소동화량이(全炭素同化量)이 정상(正常) 벼 100에 비(比)하여 40이하(以下)로 현저(顯著)히 낮으며 그 순서(順序)는 Mg>P>K이고, 동화물(同化物)의 이전(移轉)에 장해(障害)가 큰 것은 K>Mg>P의 순(順)이었다. 6. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 총건물(總乾物) 생산량(生産量)이 현저(顯著)하게 많고 특(特)히 유수형성기(幼穗形成期) 이후(以後)에 증가량(增加量)이 더욱 현저(顯著)하였다. 7. 고수량지(高收量地) 벼는 출수기(出穗期)에 옆면적(葉面積)이 최고(最高)에 달(達)하였다가 그 이후(以後) 완만(緩慢)하게 줄어지나 저수량지(低收量地) 벼는 출수이전(出穗以前)에 엽면적(葉面積)이 최고(最高)에 달(達)하였다가 출수이후(出穗以後)에 급격(急激)히 감소(減少)되며 그 원인(原因)은 하엽(下葉)의 조기고사(早期枯死)에 기인(起因)되었다. 8. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 생육초기(生育初期)에는 투과광율(透過光率)이 높고 생육후기(生育後期)에 낮았으나 투과광율대(透過光率對) 엽면적비(葉面積比)는 고수량지(高收量地) 벼에서 높았다. 9. 순동화량(純同化量)은 저수량지(低收量地) 벼에 비(比)하여 고수량지(高收量地)벼에서 많았으며 이는 또한 엽면적(葉面積)이 증가(增加)됨에 따라 감소(減少)되었다. .10. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 유수형성기(幼穗形成期) 이후(以後) 체내질소(體內窒素), 가리(加里) 및 규산(珪酸)의 함유율(含有率)이 높으면서 $K_2O/N$, $SiO_2/N$ 비(比)가 높았다.11. 저수량지(低收量地) 벼는 고수량지(高收量地) 벼에 비(比)하여 출수기(出穗期)에 보유(保有)된 질소(窒素), 인산(燐酸), 가리(加里) 및 마그네슘등이 출수이후(出穗以後) 이삭으로의 이행율(移行率)이 높았다. 이는 저수량지(低收量地) 벼가 생육후기(生育後期)에 양분(養分)의 흡술량(吸收量)이 부족(不足)하여 체내(體內) 저장양분(貯藏養分)이 재이동(再移動)되기 때문이며 따라서 하엽(下葉)은 양분부족(養分不足)으로 조길고사(早期桔死)가 많아지는 것으로추정(推定)되었다. 12. 고수량지(高收量地) 벼는 질소흡수(窒素吸收)가 전생육기간(全生育期間)을 통(通)하여 완만(緩慢)하며 출수이후(出穗以後)에도 흡수량(吸收量)이 많으나 저수량지(低收量總) 벼는 출수이전(出穗以前)에 많고 출수이후(出濾以後)는 거의 흡수(吸收)되지 않았다. 13. 출수기(出穗期)의 체내(體內) 질소(窒素), 가리(加里) 함유율(含有率)과 수량(收豊)과는 현저(顯著)한 정(正)의 상관(相關)이 성립(成立)되였으며 수확기(收獲期)의 가리(加里), 규산함유율(珪酸含有率) 그리고 $K_2O/N$, $SiO_2/N$과 수량(收量)과도 현저(顯著)한 정(正)의 상관관계(相關關係)가 성립(成立)되었다. 14. 출수기(出穗期)에 보유(保有)된 전분(澱粉)이 이삭으로의 이전(移轉)은 고수량지(高收量地) 벼가 약(約) 10%인데 반(反)하여 저수량지(低收量地) 벼는 약(約) 40%로 많았다. 따라서 저수량지(高收量地) 벼는 출수(出穗) 이후(以後) 동화의존도(同化依存度)가 높았다. 15. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 질소(窒素), 인산(燐酸), 가리(加里), 규산(珪酸) 및 망간의 흡수량(吸收量)이 현저(顯著)하게 많았고 생육시기별(生育時期別) 흡수량(吸收量)의 차이(差異)는 유수형성기(幼穗形成期) 전후(前後)에 현저(顯著)하였다. 16. 수확기(收穫期)의 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘, 규산(珪酸) 및 망간의 총흡수량(總吸收量)과 수량(收量)과는 고도(高度)의 정(正)의 상관관계(相關關係)가 인정(認定)되었다. 17. 수확기(收穫期)에 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘 및 규산(珪酸)의 흡수량(吸收量)과 수당입수간(穗當粒熱間)에, 질소(窒素) 및 가리(加里)의 흡수량(吸收量)과 수수(穗數)와는 유의적(有意的)인 정(正)의 상관관계(相關關係)가 성립(成立)되었다.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.26-33
• /
• 1984

Constant-load-amplitude fatigue crack growth tests were carried out on 5083-0 aluminum alloy under elastic and elastic-plastic conditions. Crack length, crack closure and monotonic fatigue deformation were measured by Kikukawa's unloading elastic compliance monitoring technique and elastic-plastic fatigue crack growth rates were analysed in terms of J integral. Elastic-plastic fatigue crack growth rates can be well expressed by effective cyclic J integral until general yielding occurs. Beyond general yielding, monotonic fatigue deformation becomes significant and growth rates cannot be characterized by a single parameter of effective cyclic J integral alone. However, introducing one more parameter, maximum J integral J$_{max}$ to account for the effect of monotonic fatigue deformation, can explain fatigue crack growth behavior beyond general yielding.

• Journal of Welding and Joining
• /
• 제8권3호
• /
• pp.79-88
• /
• 1990

Welded joint often contains soft or softened regions such as the HAZ of TMCP steel welded with high heat input. In this study, the equivalent yield strength of plate structure containing softened region was predicted by FEM analysis, and its incremental behavior was explained with the results of the analysis. The calculated results of yield strength indicated the following for the plate structures. 1) As the softened region starts to yield, shear stress begins to build up along the boundary between base metal and softened region. This results in multi-axial stress condition which gives restraint on the softened region. 2) Restraint effect has a significant influence on the distribution of the shear stress, the nominal stress, and the strain. 3) The yielding behavior of softened region becomes the same as that of base metal when both ratios of length to width and thickness to width of softened region are larger than 30 and 13 respectively.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.928-929
• /
• 2006

Tensile stress-strain and dynamic acoustic resonance tests were performed on Fe-C-Ni-Cu-Mo high-strength steels, characterized by a heterogeneous matrix microstructure and the prevalence of open porosity. All materials display the first yielding phenomenon and, successively, a continuous yielding behavior. This flow behavior can be described by the Ludwigson equation and developes through three stages: the onset of localized plastic deformation at the pore edges; the evolution of plastic deformation at the pore necks (where the austenitic Ni-rich phase is predominant); the spreading of plastic deformation in the interior of the matrix. The analytical modeling of the strain hardening behavior made it possible to obtain the boundaries between the different deformation stages.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.661-676
• /
• 2016

This paper presents an elastic/plastic model that neglects strain hardening during loading, but accounts for the Bauschinger effect. These mathematical features of the model represent reasonably well the actual behavior of several materials such as high strength steels. Previous attempts to describe the behavior of this kind of materials have been restricted to a class of boundary value problems in which the state of stress in the plastic region is completely controlled by the yield stress in tension or torsion. In particular, the yield stress is supposed to be constant during loading and the forward plastic strain reduces the yield stress to be used to describe reversed yielding. The new model generalizes this approach on plane stress problems assuming that the material obeys the von Mises yield criterion during loading. Then, the model is adopted to describe reversed yielding in thin hollow discs subject to external pressure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.53-56
• /
• 2003

The disappearance of continuous yielding and the formation of an extended region in engineering stress-strain curves at tempering temperatures of 673-873K is closely related to the reduction of mobile dislocations during tempering and dynamic recovery during tensile deformation. In addition, the occurrence of discontinuous yielding at tempering temperature above 923K would be attributed to the formation of new strain-free polygonal ferrite grain.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.453-458
• /
• 2001

This paper presents the procedure to find the hysteresis loop of RC member using a modified strut-and-tie model. The forces and displacements at critical points, that are initial yielding point, target displacement point, unloading elastic limit, and reloading point after pinching, are investigated with the strut-and-tie models. Using bond-slip relationship, the elastic behavior of tie element is determined. The plastic flow behavior after flexural yielding is expressed by changing the location of longitudinal strut. Determination of pinching effect completes the initial hysteresis loop, assuming that the behavior of the opposite direction is symmetrical form.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.209-212
• /
• 2005

This paper presents, basic concepts on deformation models for D-regions critical to shear. Strut-and-tie models are used to construct for deformation estimation at yielding and ultimate deformation. A generic: strut-and-tie model is proposed to investigate deformation patterns and failure mode identification. Superposition of the basic models enables us to explain deformation limits of arch action and truss action. Displacement at yielding is assessed by consideration of deformation of reinforcing steel only while the ultimate displacement is calculated by limits of ultimate strain of concrete in compression and failure mechanisms.