• Journal of Nutrition and Health
• /
• v.13 no.3
• /
• pp.117-125
• /
• 1980

In order to investigate the utilization efficiency of dietary protein in the rat body and effects of dietary fat on its protein metabolism, 51 Sprague-Dawly rats of 6 weeks old weighing approximate)y 106g were subjected to feeding trials for 4 weeks and then subsequently to metabolic trials for 3 weeks using six different diets composed of three different levels of protein (10%, 20% and 30%) with low (20%) and high (40%) fat content for each protein level, total energy being fixed at 4000 Kcal/kg by addition of an appropriate amount of carbohydrate, and the following results were obtained. 1) The body weight gain increased in the low fat diets with increasing protein level whereas it decreased in the high fat diets. Food efficiency also increased in the low fat diets with increasing protein level, but no do deffinitive trend was observed in the high fat diets. The protein efficiency was generally higher at low protein level and tended to decrease as the protein level increased, regardless of the amount of fat intake. 2) As the protein level was increasing, digestibility of dry matters and carbohydrate were decreasing whereas that of protein was slightly increasing. On the other hand, digestibility of fat was always very high regardless of the amounts of dietary protein and fat. 3) The gross energy intake was affected both by protein and fat contents in the diets: The energy metabolism efficiency was decreasing with increasing protein level and at the same protein level the energy utilization was considerably higher in the low fat diets than in the high fat. 4) From the above-mentioned experimental results it may be concluded that the best formula of diet for growing rats is probably composed of 20% protein, 20% fat and 60% carbohydrate.

• Applied Biological Chemistry
• /
• v.26 no.4
• /
• pp.222-230
• /
• 1983

This study was designed to develop a process for the immobilization of xylose isomerase(D-xylose ketol isomerase, EC 5.3.1.5) from Streptomyces griseolus previously isolated by the authors and its application on a pilot plant scale for the production of high fructose corn syrup. The biomass which has endo-excreted xylose isomerase was homogenized under a pressure of $500kg/cm^2$ and 90.8% of the enzyme recovery of the native activity was obtained as compared to 54.7% recovery by the lysozyme treatment. Ionic bonding method was adopted for the enzyme immobilization due to its many reported merits. It was found that the porous resins such as Diaion HP 20, Duolite A-7, Amberlite IRA 93 and 94 were effective in immobilizing the enzyme. In addition, it was disclosed that the regeneration form of $BO_4--$ is effective for Amberlite IRA 93 and $HCO_3-$ for Diaion HP 20. Optimal immobilization condition for Amberlite IRA 93 was pH 8.0 and $55^{\circ}C$ yielding 80.6% of immobilization. Activity decay test showed half life of the immobilized enzyme with Amberlite IRA 93 was more than 24 days at $65^{\circ}C$. The carrier was evaluated to be resuable and its result showed the relative immobilization yields were 98.2, 93.3, 90.7 and 87.5%, respectively at second, third, forth and fifth rebinding test of the enzyme on Amberlite IRA 93. Optimal temperature of the immobilized enzyme was slightly lowered and the range widened to $60\sim70^{\circ}C$, while optimal pH moved toward $8.0\sim8.3$ in its isomerization reaction. The trial production result of high fructose corn syrup in pilot scale immobilization showed that one liter of immobilized xylose isomerase (350 IXIU/ml-R) is capable producing about 293l high fructose corn syrup(75% dry substance) in 30 days.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.261-270
• /
• 1992

Many herbicides that are applied at the soil before weed emergence inhibit plant growth soon after weed germination occurs. Plant growth has been known as an irreversible increase in size as a result of the processes of cell divison and cell enlargement. Herbicides can influence primary growth in which most new plant tissues emerges from meristmatic region by affecting either or both of these processes. Herbicides which have sites of action during interphase($G_1$, S, $G_2$) of cell cycle and cause a subsequent reduction in the observed frequency of mitotic figures can be classified as an inhibitor of mitotic entry. Those herbicides that affect the mitotic sequence(mitosis) by influencing the development of the spindle apparatus or by influencing new cell plate formation should be classified as causing disruption of the mitotic sequence. Sulfonylureas, imidazolinones, chloroacetamides and some others inhibit plant growth by inhibiting the entry of cell into mitosis. The carbamate herbicides asulam, carbetamide, chlorpropham and propham etc. reported to disrupt the mitotic sequence, especially affecting on spindle function, and the dinitroaniline herbicides trifluralin, nitralin, pendimethalin, dinitramine and oryzalin etc. reported to disrupt the mitotic sequence, particularly causing disappearence of microtubles from treated cells due to inhibition of polymerization process. An inhibition of cell enlargement can be made by membrane demage, metabolic changes within cells, or changes in processes necessary for cell yielding. Several herbicides such as diallate, triallate, alachlor, metolachlor and EPTC etc. reported to inhibit cell enlargement, while 2, 4-D has been known to disrupt cell enlargement. One potential danger inherent in the use of soil acting herbicides is that build-up of residues could occur from year to year. In practice, the sort of build-up that would be disastrous is unikely to occur for substances applied at the correct soil concentration. Crop injury caused by soil applied herbicides can be minimized by (1) following the guidance of safe use of herbicides, particularly correct dose at correct time in right crop, (2) by use of safeners which protect crops against injury without protecting any weed ; interactions between herbicides and safeners(antagonists) at target sites do occur probably from the following mechanisms (1) competition for binding site, (2) circumvention of the target site, and (3) compensation of target site, and another mechanism of safener action can be explained by enhancement of glutathione and glutathione related enzyme activity as shown in the protection of rice from pretilachlor injury by safener fenclorim, (3) development of herbicide resistant crops ; development of herbicide-resistant weed biotypes can be explained by either gene pool theory or selection theory which are two most accepted explanations, and on this basis it is likely to develop herbicide-resistant crops of commercial use. Carry-over problems do occur following repeated use of the same herbicide in an extended period of monocropping, and by errors in initial application which lead to accidental and irregular overdosing, and by climatic influence on rates of loss. These problems are usually related to the marked sensitivity of the particular crops to the specific herbicide residues, e.g. wheat/pronamide, barley/napropamid, sugarbeet/ chlorsulfuron, quinclorac/tomato. Relatively-short-residual product, succeeding culture of insensitive crop to specific herbicide, and greater reliance on postemergence herbicide treatments should be alternatives for farmer practices to prevent these problems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.149-163
• /
• 1976

In Korea, the ever-increasing population has become a serious problem and the decreasing of cultivated lard area per person has become a major concern. Therefore, today we are implementing a green revolution using miracle varieties which require more fertilizer. The increased use of fertilizer along with development and adoption of high yielding varieties is the key to carrying out this green revolution. Fertilizer consumption in Korea is mainly influenced by agricultural techniques, fertilizer prices and government policies for increasing food production. If there are no special change, such as a cataclysm or an exhaustion of resources, it is quite clear that the fertilizer demand will increase to the near maximum ceiling point of optimum levels for crops in the year 2000. Fertilizer demand is not the amount of fertilizer that will be used by the farmer, but the actual optimum amount of plant nutrients required for maximum production. In this report, two alternative strategies are consideded in forecasting the future feitilizer demands. Alternative I is projected by reviewing consumption amounts over the last 10 years (1966~75) in Korea. The annual rate of increase in fertilizer consumption for the last 10 years was approximately 8.7% (table 1). Plant nutrient consumption rates in later years have been more balanced, and also fertilizer consumption per total acreage is considerably higher in Korea than in other countries (table 11), consequently the rate of increase in the future is expected to decline. Looking at the long term projections, the average annual rate of increase is expected to be 7% for 1976~80, 2.5% for 1981~90, 1.5% for 1991~2000. Thus, total projected fertilizer demands are estimated at 1,208,000M/T by 1980, 1,547,000M/T by 1990, 1,795,000M/T by 2000 (table 16). Alternative II is based on projected optimum fertilizer levels for crops and on increased crop acreage. The government recommended fertilizer rate has increased by a factor of 0.99 to 5.49 over the past twelve years depending on the specific crops (table 4). Levels of fertilizer demand recommended by government (table 7) in 1976 are still low compared with actual optimum fertilizer demands for crops (table 5). Therefore, future incaeases in fertilizer usage are anticipated. Thus, total projected fertilizer demands are estimated at 1,229,000M/T by 1980, 1,493,000M/T by 1990 and 1,898,000M/T by 2000(table 16).

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.513-521
• /
• 2009

Recently, the externally prestressed unbonded concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with external unbonded tendon is different from that of normal bonded PSC beams in that the slip of tendons at deviators and the change of tendon eccentricity occurs as external loads are applied in external unbonded PSC beams. The purpose of the present paper is therefore to evaluate the flexural behavior by performing static flexural test according to tendon area and tendon force. From experimental results, before flexural cracking, there was no difference between external members and bonded members. However, after cracking, yielding load of reinforcement, ultimate load, and the tendon stress of external members was lower than that of bonded members. For the relationship of load-tendon stress, the increasing of tendon strain was inversely proportional to the initial tendon force. However, even if the initial tendon force was large, the tendon strain with small effective stress was smaller than that with large effective stress. The concrete compressive strain was proportional to the effective stress of external tendon. From the comparison between test results and codes, the ACI-318 could not consider the effect of tendon force or effective stress, and especially the results of ACI-318 were very small, so it was very conservative. And the AASHTO 1994 could be influenced on the tendon area, initial force and effective stress, but as it was made on the basis of internal unbonded tendon, its results were much larger than the test results. For this reason, the new correct predict equation of external tendon stress will be needed.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.155-166
• /
• 2010

Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.193-200
• /
• 2004

The preparation of low-fat chicken patties added 10% fat and 0.5% sodium alginate (SA treatment) arabia gum (AG treatment), xanthan gum (XG treatment), respectively and the control patty containing 20% fat was prepared. The moisture contents of raw, cooked and reheated patty of control were lower than low-fat patties containing gums, and were no significant difference among low-fat patties. The fat content of control patty was higher than that of the low-fat patties and the protein showed no significant difference among patties. In case of raw patty, the Hunter's $L^{*}$ value of control patty was higher than that of the low-fat patties, the Hunter's $a^{*}$ value was no significant difference among patties. But the Hunter's $L^{*}$, $a^{*}$ and $b^{*}$ values of cooked and reheated patties showed no significant difference among patties The yielding and fat retention of cooked control patty were lower than that of the low-fat patties. The yield and fat retention of reheated control patty were lower than those of the low-fat patties, and the final yield of low-fat patties was higher than that of the control patty The hardness of cooked patties showed no significant difference among patties but the springiness, cohesiveness and chewiness of low-fat patties were higher than those of the control patty. The water holding capacity of low-fat patties was higher than that of the control patty. In case of reheated patties, the hardness was no significant difference among patties, the springiness was highest in low-fat patty treated arabia gum and was lowest in control patty. The cohesiveness, chewiness and water holding capacity of reheated low-fat patties were higher than those of the control patty. Oleic, palmitic, linoleic and stearic acids were major fatty acids, and glutamic acid, aspartic acid, lysine, leucine, arginine and alanine were major amino acids in chicken patties. The aroma was not significantly different among patties, but the texture of low-fat patties was higher than that of the control patty and was not significantly different among low-fat patties.tties.ies.

• Journal of Korean Academy of Nursing
• /
• v.23 no.4
• /
• pp.585-601
• /
• 1993

Data on 63 patients who had had motorcycle accidents and who were admitted to four general hospitals in the Chung Chung Nam Do area from July / 1993 to August 1993 were analyzed. The tool used for this study was a structured questionnaire which consisted of ten items on self- esteem, 18 items on health locus of control and 37 items profiling health prometion lifestyle. Injury severity scores were calculated bated based on data from the patients’ medical records. The collected data were analyzed using the SPSS, yielding descriptive statistics, t-test, ANOVA, Pearson’s Product Moment Correlation. The findings of this study are as follows. 1) Of the 63 injured motorcyclists, 35(55.6%) were helmeted and 28(44.4%) were nonhelmeted, and the nonhelmeted motorcyclists were predominantly young and male. The demographic variables for the helmeted and nonhelmeted groups were heterogeneous for age and occupation. 2) The results of the comparison between the two groups showed a statistically significant difference in the injury severity score(t=-4.70, p=0.000). The helmeted group had lower scores on injury severity score (9.00±3.93) than the nonhelmeted group(14.32土5.05). More than 60% of the nonhelmeted motorcyclists had brain injuries compared to only a third of the helmeted cyclists. 3) There .was a statistically significant difference between the two groups on self esteem(t=4.5, 000). The helmeted group had a higher mean score (31.27±2.72) than the nonhelmeted group(27.46±3.80). 4) The means for Internal health locus of control (IHLC), Powerful others health locus of control (PHLC), and Chance health locus of control (CHLC) in the two groups were similar to instrument norms reported in other literature. The mean scores on the IHLC in the two groups were higher than scores on the PHLC or the CHLC. However, there was a significant difference between the mean scores for the two groups on the PHLC (t=2.85, P=0.006). 5) The mean score for the helmeted group on the health promotion lifestyle profile was higher than the mean score for the nonhelmeted group(107.30±11.10, 96.57土 15.54 respectively), and there was a significant difference between the mean scores (t=3.64, p=0.001) . The highest score for helmeted group on the health promotion lifestyle profile was in the health care domain. However, for the nonhelmeted group the highest score was in the exercise domain and the lowest score was in the health care domain. 6) With regard to the relationship between health promotion lifestyle, health locus of control and self esteem in the two groups, the correlation coefficient between health promotion lifestyle and internal health locus of control for the helmeted group was 50(p〈0.01). For the nonhelmeted group, there was no correlation between health promotion lifestyle and internal health locus of control. However, there were significant correlation between health pro-motion lifestyle and external locus of control(r=0. 46, p〈0.01), and self esteem(r=0.495, p〈0.01). 7) Among the demographic variables, age and education had an impact on individual’s self-esteem The modifying factors of age made a contribution to explaining health - promoting lifestyle. In the present study, more than 40% rf the motorcyclists were riding without a helmet. The incidence of brain injury for patients riding without a helmet was nearly twice as high in the nonhelmeted rider as compared to the helmeted rider. The nonhelmeted motorcyclists in this study had lower self-esteem, obtained a higher score on the IHLC, and were not strongly engaged in performing health promotion activities as compared to the helmeted riders. However, some of the nonhelmeted riders who had a strong belief in PHLC were positively associated with engaging in health promotion activities. Based on the results obtained from this study, strategies to promote helmet usage for motorcyclists have to be developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.53-62
• /
• 1986

For the research on the fatigue fracture behavior in the welded joints of steel structures, base metal specimens and welded ones were selected, and the direct fatigue tests were carried out. Thereafter, fatigue-life (S-N) curves, plastic strain-number of cycles (${\varepsilon}_p$-N) curve, the extrapolated fatigue-life (${\varepsilon}_p$-$N_c$) curve, and da/dN-${\Delta}K$ curves were plotted. By these results the followings were obtained. It was shown that the ratio of fatigue strength at $2{\times}10^6$ cycles of the welded specimen to that of the base metal one was 0.6, and that 0.72 for the base metal and 0.65 for the welded one were the ratio of fatigue strength at $2{\times}10^6$ cycles to yielding stress. The S-N curve for the welded specimen was separated into two sections, the low gradient section and the steep section. As this result, it was shown that the more stress became to reduce, the more the reduction of fatigue strength became to be great. It was shown that fatigue strength at $2{\times}10^6$ cycles from this case was about 83 % of that from the S-N curve plotted with one section. It was thought that the reason was that weld flaw acted greatly on the fatigue strength within the low stress range. It was shown that at the instart of crack initiation plastic strain increased abrupt1y in the case of the welded specimen more than the case of the base metal specimen, and increased abruptly in the upper stress range in both cases. It was shown that the experimental constant ${\alpha}$, 0.42, in the base metal nearly accorded with Manson-Coffin's result, but this made a great difference with the case in the welded specimen. It was thought that it was due to the abrupt change of plastic strain and the influence of weld flaw.