• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2547-2549
• /
• 1998

Automatic yield-test equipment for micro mirror array using image processing was developed. This computerized test equipment can classify the error states of the micromirrors. The test results are displayed on the monitor as a map which shows the error states and position. It is possible to measure yield and reliability with this test equipment for micromirror array using image processing.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.315-320
• /
• 2002

Test-day records (n=13677) sampled from 896 ewes in 5-9 (${\mu}$=7.5) monthly test-days were used to estimate genetic and phenotypic parameters of test-day yields, lactation milk yield (TMY), length of the milking period (DAYS) and three measures of persistency of milk yield in Boutsico dairy sheep. Τhe measures of persistency were the slope of the regression line (${\beta}$), the coefficient of variation (CV) of the test-day milk yields and the maximum to average daily milk yield ratio (MA). The estimates of variance components were obtained under a linear mixed model by restricted maximum likelihood. The heritability of test-day yields ranged from 0.15 to 0.24. DAYS were found to be heritable ($h^2$=0.11). Heritability estimates of ${\beta}$, CV and MA were 0.15, 0.13, 0.10, respectively. Selection for maximum lactation yields is expected to result in prolonged milking periods, high rates of decline of yields after peak production, variable test-day yields and higher litter sizes. Selection for flatter lactation curves would reduce lactation yields, increase slightly the length of the milking period and decrease yield variation as well as litter size. The most accurate prediction of TMY was obtained with a linear regression model with the first five test-day records.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.58-64
• /
• 2012

Purpose: The objective of this study was to investigate the feasibility of anaerobic digestion of Chinese cabbage waste juice (CCWJ) and swine manure(SM). Methods: The anaerobic digestion test was conducted under batch and continuous conditions at mesophilic temperature ($36-38^{\circ}C$). The batch test was divided into Experiment I and II. In the Experiment I, biogas potential and production rate of CCWJ was evaluated. In Experiment II the effect of F/M ratio (2.0, 3.2, 4.9) at mixture ratio of 25:75(CCWJ: SM, % vol. basis) on biogas yield was studied. Results: CCWJ produced biogas and methane yield of 929 and 700 mL/g VS added respectively. The biogas yield from the mixture of CCWJ and SM was almost same at F/M ratio of 2.0 and 3.2 but dropped by 14% when F/M ratio increased from 3.2 to 4.9. In continuous test the mixture of CCWJ and SM (25:75, % vol. basis) produced biogas yield of 352 mL/g VS added which is around 11% higher compared to biogas yield from SM alone. Addition to biogas yield digester performance was also improved with co-digestion of CCWJ with SM. Conclusions: The results showed that the anaerobic digestion of CCWJ with SM could be promising for improving both the biogas yield and digester performance at mesophilic temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권12호
• /
• pp.1696-1701
• /
• 2006

A random regression model was applied for the first time for the analysis of test day records and to study the genetic persistency of first lactation milk yield of Indian Murrah buffaloes. Wilmink's Function was chosen to describe the shape of lactation curves. Heritabilities of test day milk yield varied from 0.33 to 0.58 in different test days. The highest heritability was found in the initial test day ($5^{th}$ day) milk yield. Genetic correlations among test day milk yields were higher in the initial test day milk yield and decreased when the test day interval was increased. The magnitude of genetic correlations between test day and 305 day milk yield varied from 0.25 to 0.99. The genetic persistencies of first lactation milk yield were estimated based on daily breeding values using two methods. $P_1$ is the genetic persistency estimated as a summation of the deviation of estimated daily breeding value on days to attain peak yield from each day after days to attain peak yield to different lactation days. $P_2$ is the genetic persistency estimated as the additional genetic yield (gained or lost) from days to attain peak yield to estimated breeding value on different lactation days relative to an average buffalo having the same yield on days to attain peak yield. The mean genetic persistency on 90, 120, 180, 240, 278 and 305 days in milk was estimated as -4.23, -21.67, -101.67, -229.57, -330.06 and -388.64, respectively by $P_1$, whereas by $P_2$ on same days in milk were estimated as -3.96 (-0.32 kg), -23.94 (-0.87 kg), -112.81 (-1.96 kg), -245.83 (-2.81 kg), -350.04 (-3.28 kg) and -407.58 (-3.40 kg) respectively. Higher magnitude of rank correlations indicated that the ranking of buffaloes based on their genetic persistency in both methods were similar for evaluation of genetic persistency of buffaloes. Based on the estimated range of genetic persistency three types of genetic persistency were identified. Genetic correlations among genetic persistency in different days in milk and between genetic persistencies on the same day in milk were very high. The genetic correlations between genetic persistency for different days in milk and estimated breeding value for 305 DIM was increased from 90 DIM to 180 DIM, and highest around 240 DIM which indicates a minimum of 240 days as an optimum first lactation length might be required for genetic evaluation of Indian Murrah buffaloes.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.135-144
• /
• 1999

An yield monitoring system plays a key role in precision farming. An yield monitoring system and a DGPS were implemented to a widely used domestic combine for yield mapping of a small sized paddy field, and yield mapping algorithms were investigated in this study. The yield variation in the 0.1ha rice paddy field was measured by installing a yield flow sensor and a grain moisture sensor at the end of the clean grain elevator discharging grains into a grain tank. Yield map of the test filed was drawn in a point map and a linear interpolated map based on the result of the field test. The size of a unit yield grid in yield mapping was determined based on the combine traveling speed, effective harvesting width and data storing period. It was possible to construct the yield map of a small sized paddy field.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.31-36
• /
• 2003

In this study a relationship between SP curves and tensile properties was investigated by FE analysis on SP test with various assumed tensile properties. For the accuracy of FE analysis, SP test and tensile test were performed and those results were compared with FE analysis results. The yield load(Py) defined from the intersection point of two lines tangent to the elastic bending region and plastic bending region. And it was related specifically with yield stress(${\sigma}_0$) in FE analysis result curves. The slopes of FE analysis result curves normalized by yield stress(${\sigma}_0$) reflected the change of tensile properties regardless of yield stress(${\sigma}_0$) variation. Empirical relations were derived from these results. Tensile properties from these relations showed good agreement in FE analysis curve and tested curve.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.57-62
• /
• 2008

When the yield line theory is used to estimate the ultimate strength of a concrete barrier, it is of primary importance that the correct assumption is made for the failure mode of the barrier. In this study, a static test was performed on two full-scale concrete barrier specimens of Korean standard shape that simulate the actual behavior of a longitudinally continuous barrier. This was conducted in order to verify the failure mode presented in the AASHTO LRFD specification. The resulting shape of the yield lines differed from that presented in AASHTO when subjected to an equivalent crash load. Furthermore, the ultimate strengths of the specimens were lower than the theoretical prediction. The main causes of these differences can be attributed to the characteristics of the barrier shape and to a number of limitations associated with the classical yield line theory. Therefore, a revised failure mode with corresponding prediction equations of the strength were proposed based on the yield lines observed in the test. As a result, a strength that was more comparable to that of the test could be obtained. The proposed procedure can be used to establish more realistic test levels for barriers that have a similar shape.

• Animal Bioscience
• /
• 제35권10호
• /
• pp.1499-1511
• /
• 2022

Objective: This study was aimed to estimate the genetic parameters, including genetic and phenotypic correlations, of milk yield, lactation curve traits and milk composition of Thai dairy cattle from three government research farms. Methods: The data of 25,789 test-day milk yield and milk composition records of 1,468 cattle from lactation 1 to 3 of Holstein Friesian (HF) and crossbred HF dairy cattle calved between 1990 and 2015 from three government research farms in Thailand were analysed. 305-day milk yield was estimated by the Wood model and a test interval method. The Wood model was used for estimating cumulative 305-day milk yield, peak milk yield, days to peak milk yield and persistency. Genetic parameters were estimated using linear mixed models with herd, breed group, year and season of calving as fixed effects, and animals linked to a pedigree as random effects, together with a residual error. Univariate models were used to estimate variance components, heritability, estimated breeding values (EBVs) and repeatability of each trait, while pairwise bivariate models were used to estimate covariance components and correlations between traits in the same lactation and in the same trait across lactations. Results: The heritability of 305-day milk yield, peak milk yield and protein percentage have moderate to high estimates ranging from 0.19 to 0.45 while days to peak milk yield, persistency and fat percentage have low heritability ranging from 0.08 to 0.14 in lactation 1 cows. Further, heritability of most traits considered was higher in lactation 1 compared with lactations 2 and 3. For cows in lactation 1, high genetic correlations were found between 305-day milk yield and peak milk yield (0.86±0.07) and days to peak milk yield and persistency (0.99±0.02) while estimates of genetic correlations between the remaining traits were imprecise due to the high standard errors. The genetic correlations within the traits across lactation were high. There was no consistent trend of EBVs for most traits in the first lactation over the study period. Conclusion: Both the Wood model and test interval method can be used for milk yield estimates in these herds. However, the Wood model has advantages over the test interval method as it can be fitted using fewer test-day records and the estimated model parameters can be used to derive estimates of other lactation curve parameters. Milk yield, peak milk yield and protein percentage can be improved by a selection and mating program while days to peak milk yield, persistency and fat percentage can be improved by including into a selection index.

• 한국작물학회지
• /
• 제57권4호
• /
• pp.401-408
• /
• 2012

The grain and agronomic characteristics of Korean barley cultivars were investigated with respect to ethanol yield. Test weight, grain yield, and starch yield showed noticeable variation among the cultivars. Grain yields were higher in covered barley and non-waxy barley. Starch yield was higher in non-waxy barley than waxy barley. Protein, ${\beta}$-glucan, and starch content of tested cultivars ranged in 10.0-12.9%, 4.4-7.5% and 49.7-65.3%, respectively. Naked barley cultivar had higher starch content than covered barley cultivar. However, covered barley had high starch yield because it has higher grain yield than naked barley. Covered barley cultivar had higher husk content, ranging 7.6-14.0%, than that of naked barley cultivar, ranging 5.3-8.0%. Starch content was positively correlated with amylose content, test weight, ethanol yield and negatively correlated with protein, husk, ${\beta}$-glucan content. Ethanol yield per ton was positively correlated with starch content, but negatively correlated with husk content. Ethanol yield per hectare was positively correlated with starch yield, grain yield, grain weight and negatively correlated with protein, test weight. From this research, the important characteristics of barley cultivar as a bioethanol producing material were starch content and grain yield. Optimum barley genotype was non-waxy naked barley that had low protein, ${\beta}$-glucan, husk content, and high starch content and grain yield.

• 한국작물학회지
• /
• 제50권4호
• /
• pp.262-264
• /
• 2005

A study on genetic variability and association of yield attributing characters with grain yield was carried out using 35 deepwater rice genotypes. High genotypic co-efficient of variation (GCV) was observed for plot yield, $EBT/m^2$, plant height and days to $50\%$ flowering (DFF). For all the traits, estimates of the phenotypic co-efficient of variation (PCV) were higher than GCV, indicating presence of environmental influence. High heritability and genetic advance was observed for plot yield, $EBT/m^2$ and plant height. Plot yield had significant positive association with test weight, $EBT/m^2$ and DFF. However, test weight had the maximum direct effect on grain yield