• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.442-450
• /
• 2015

Climate temperature affects animal production. This study was conducted to evaluate whether climatic conditions affect beef carcass characteristics of Korean cattle steers. The monthly carcass characteristics of Korean cattle steers (n = 2,182,415) for 8 yr (2006 through 2013) were collected from the Korean Institute for Animal Products Quality Evaluation. Daily climate temperature (CT) and relative humidity (RH) data were collected from the Korean Meteorological Administration. Weather conditions in South Korea during summer were hot and humid, with a maximum temperature of $28.4^{\circ}C$ and a maximum RH of 91.4%. The temperature-humidity index (THI), calculated based on CT and RH, ranges from 73 to 80 during summer. Winter in South Korea was cold, with a minimum temperature of $-4.0^{\circ}C$ and a wind-chill temperature of $-6.2^{\circ}C$. Both marbling score (MS) and quality grade (QG) of Korean cattle steer carcasses were generally best (p<0.05) in autumn and worst in spring. A correlation analysis showed that MS and QG frequencies were not associated (p>0.05) with CT. Yield grade (YG) of Korean cattle steer carcasses was lowest (p<0.05) in winter (November to January) and highest in spring and summer (May to September). A correlation analysis revealed that YG frequency was strongly correlated ($r{\geq}0.71$; p<0.01) with CT and THI values. The rib eye area, a positive YG parameter, was not associated with CT. Backfat thickness (BT), a negative YG factor, was highest in winter (November and December). The BT was strongly negatively correlated ($r{\leq}-0.74$; p<0.01) with CTs. Therefore, the poor YG during winter is likely due in part to the high BT. In conclusion, YG in Korean cattle steer carcasses was worst in winter. QGs were not associated with winter or summer climatic conditions.

• Journal of Animal Science and Technology
• /
• v.64 no.6
• /
• pp.1077-1091
• /
• 2022

This study was conducted to determine the rumen fermentation dynamics of lupin flakes and elucidate the effects of lupin flake supplementation on the growth performance, blood metabolites, and carcass characteristics of Hanwoo steers. In vitro and in situ trials of lupin grains and lupin flakes were conducted using three Hanwoo cows with rumen fistulas. The feeding trial included 40 early-fattening Hanwoo steers randomly divided into four groups: control, T1, T2, and T3. Their formula feed contained 0%, 3%, 6%, and 9% lupin flakes, respectively. In vitro rumen pH and ammonia concentrations were lower in the lupin flake group than in the lupin grain group after 6 and 24 h of incubation, respectively (p < 0.05). Concentrations of propionate, butyrate, and total volatile fatty acids were higher in the lupin flake group than in the lupin grain group after 12 h of incubation (p < 0.05), as was the crude protein disappearance rate at 9 and 12 h of rumen fermentation (p < 0.05). Supplementation with lupin flakes did not affect the average daily gain. Compared to that in the control group, dry matter intake was lower in the lupin flake-supplemented groups (p < 0.05); the feed conversion ratio was lower in T2 and T3 (p < 0.05); and plasma total protein concentration in 29-month-old steers was lower in T1 and T3 (p < 0.05). Plasma triglyceride concentration was lower in the lupin flake-supplemented groups than in the control group (p < 0.05). The incidence rate of yield grade A was higher in T1 and T2 than in the control group; the incidence rate of meat quality 1⁺ grade or higher was highest in T2. The carcass auction price was higher in T2 than in the other groups. Overall, compared to whole lupin grains, lupin flakes seem to more substantially affect rumen ammonia concentrations and crude protein disappearance rate. Additionally, we suggest that supplementation with 6% lupin flake formula feed exerts positive effects on the feed conversion ratio, yield grade, and quality grade of Hanwoo steers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1202-1208
• /
• 2020

Objective: The aim of this study was to identify a distribution pattern of meat quality grade (MQG) as a function of carcass yield index (CYI) and the gender of Hanwoo (bull, cow, and steer) to determine the optimum point between both yield and quality. We also attempted to identify how pre- and post-deboning variables affect the gender-specific beef quality of Hanwoo. Methods: A total of 31 deboning variables, consisting of 7 pre-deboning and 24 post-deboning variables from bulls (n = 139), cows (n = 69), and steers (n = 153), were obtained from the National Institute of Animal Science (NIAS) in South Korea. The database was reconstructed to be suitable for a statistical significance test between the CYI and the MQG as well as classification of meat quality. Discriminant function analysis was used for classifying MQG using the deboning parameters of Hanwoo by gender. Results: The means of CYI according to 1+, 1, 2, and 3 of MQG were 68.64±2.02, 68.85±1.94, 68.62±5.88, and 70.99±3.32, respectively. High carcass yield correlated with low-quality grade, while high-quality meat most frequently was obtained from steers. The classification ability of pre-deboning parameters was higher than that of post-deboning parameters. Moisture and the shear force were the common significant parameters in all discriminant functions having a classification accuracy of 80.6%, 71%, and 56.9% for the bull, cow, and steer, respectively. Conclusion: This study provides basic information for predicting the meat quality by gender using pre-deboning variables consistent with the actual grading index.

• Journal of Ginseng Research
• /
• v.13 no.2
• /
• pp.169-173
• /
• 1989

Seven year old ginseng was investigated for yield , the relationship between yield and percent missing plant and red ginseng quality. Yield was 2.06 kg/kan (3.3 m2) and percent missing plant was 27.1%. The highest yield plot showed 3.58 kg/kan and potential yield appeared to be 4.5 kg/kan. Yields of 1st, End and 3rd line showed significant negative linear correlation with percent missing plant. Potential yield without missing plant was in decreasing order of 1>2)3>5) 4 and negatively correlated with unit yield decrease per percent missing plant. Potential yield of 1st line was 6.56 kg/tan. Soft X-ray absorbtion characteristics was not different from that of 6 year old ginseng. Red ginseng grade and percent occurence of red ginseng quality factors were not different from those of 6 years old ginseng. The weight of red ginseng per root was much greater than that of 6 years ginseng. In view of yield and quality of fresh and red ginseng the production of red ginseng from 7 years old ginseng appears to be economically feasible.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.389-394
• /
• 2000

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.211-219
• /
• 2005

Nowadays, various grades of high-strength steels are available. The application of ultra-high grades of steels for building structures, however, is limited only to the elements stressed under tension. The highest grade of steels generally used has a tensile strength of around 600N/mm2. Most research is focused on lower yield ratios of high strength steel in the inelastic range to ensure the stability of structures. In this paper, however, the possibility of an effective application of high strength steel with high yield ratio to building structures is discussed. An efficient structural system and a design method based on earthquake response analysis and experimental results are proposed.

• Journal of Ginseng Research
• /
• v.22 no.1
• /
• pp.11-17
• /
• 1998

To develop a new ginseng varieties with good quality and high yielding, a lot of individual ginseng plants were selected in the farmer's fields in 1972. Among them, a promising line, 7259-3-1, has been developed through comparative cultivation of several lines selected with pure line separation of local races in Korea Ginseng '||'&'||' Tobacco Research Institute. Preliminary and advanced yield trials were performed for 8 years. It was then designated as "KG 101" and tested in the regional yield and adaptation trials for 10 years (1981-1990). KG101 has a green stem with light violet and orange-yellow fruit and flowers 3-7 days later than local race, Takyungjong. Taproot of KG101 was longer than local race Jakyungjong, and root yield of KG101 was 9% higher than local race Jakyungjong. In red ginseng quality, the rates of Chun-Jeesam (Chun and Jee means 1st and 2nd grade, respectively) were 22.3% and 9.4% for KG101 and Jakyungjong, respectively. In these results, it was clarified that KG101 was superior ginseng line with good quality.y.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.219-223
• /
• 1993

A total of 333 calves were evaluated for carcass quality traits including: dressing percentage (DP), yield grade (YG), marbling score (MS), fat thickness (FT) and percent body fat (PF). Mating types included straightbred Angus (A) and Santa Gertrudis (S), the reciprocal crosses of these two breeds and Gelbvieh (G) ${\times}$ Angus. The year of birth, slaughter group and dam breed were found to have greatly influenced DP. Mating types had no effect on DP. For YG, sire breed, sire within sire breed and slaughter group were important. Crossbreds of A ${\times}$ S had the highest YG followed by A purebreds. Crossbreds of G ${\times}$ A had the lowest YG. Sire breed, dam breed and the slaughter group has significantly affected the MS. Sire breed, sire nested within sire breed and slaughter group were found to have greatly influenced the FT. Sires and dams of A produced the greatest FT while sires of G produced the lowest. Slaughter group 2 (slaughtered at 433 days of age) had a greater FT than group 1 (slaughtered at 393 days of age). For PF, sire breed, sire within sire breed, dam breed and slaughter group had significant effects. A purebreds had the largest PF while S purebreds and G ${\times}$ A crosses had the least.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.342-348
• /
• 2001

This study was conducted to obtain granular crystalline gypsum that can be used as raw material for plaster boards or cements from waste Plaster board. We could disintegrate preferentially gypsum to gypsum needle in 10${\mu}{\textrm}{m}$ or less size among the contents of waste plaster board (gypsum, paper, fiber, and inorganic material .etc.) by hydration afterwards the dehydration of crushed waste plaster board. In this case, the optimum conditions for minimizing the size of gypsum were dehydration rate of 75%~ 85%, hydration concentration of 10~20%, agitation speed of 250~400rpm, crushing size of 2cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield from under screenings of 325mesh wet screening which followed by the dehydration-hydration process performed in the conditions of dehydration rate of 80%, hydration concentration of 15%, agitation speed of 300rpm, crushing size of 2cm or less. Subsequently, Plate-like Crystalline gypsum of is 151${\mu}{\textrm}{m}$ size and the grade of 99.49% with the Yield of 98.0% from the upper screenings of 270mesh wet screening carried out after the re-crystallization of the recovered gypsum needle slurry.