• KSBB Journal
• /
• v.29 no.3
• /
• pp.131-138
• /
• 2014

In this study, we isolated two novel chitinase producing bacterial strains from yellow loess samples collected from Jullanamdo province. The chitinase producing bacteria were isolated based on the zone size of clearance in the chitin agar plates. Both of them were gram positive, rod ($2{\sim}3{\times}0.3{\sim}0.4{\mu}m$), spore-forming, and motility positive. They were facultative anaerobic, catalase positive and hydrolyzed starch, gelatin, and casein. From the 16s rRNA gene sequence analysis, the isolates were labeled as Bacillus licheniformis KYLS-CU01 and B. licheniformis KYLS-CU02. The isolates showed higher extracellular chitinase activities than B. licheniformis ATCC 14580 as a control. The optimum temperature and pH for chitinase production were $40^{\circ}C$ and pH 7.0, respectively. Response Surface Methodology (RSM) was used to optimize the culture medium for efficient production of the chitinase. Under this optimal condition, 1.5 times higher chitinase activity of B. licheniformis KYLS-CU02 was obtained. Extracellular chitinases of the two isolates were purified through ammonium sulfate precipitation and anion-exchange DEAE-cellulose column chromatography. The specific activities of purified chitinase from B. licheniformis KYLS-CU01 and B. licheniformis KYLS-CU02 were 7.65 and 5.21 U/mg protein, respectively. The molecular weights of the two purified chitinases were 59 kDa. Further, the purified chitinase of B. licheniformis KYLS-CU01 showed high antifungal activity against Fusarium sp.. In conclusion, these two bacterial isolates can be used as a biopesticide to control pathogenic fungi.

• Journal of Forest and Environmental Science
• /
• v.26 no.3
• /
• pp.181-192
• /
• 2010

Water erosion is progressing in the Loess Plateau, especially in gullies, and the sediment runoff to the Yellow River amounts to 975 million tons every year. Natural factors for water erosion include climate, soil, geological feature, terrain and vegetation. Many development projects due to the increasing population reduced the forest coverage ratio to 10%, and 200 million people in the downstream area are suffering from the damage during intense rainfall. Accordingly, the Chinese government is continuously trying to efficiently prevent the erosion by establishing measures for water erosion, including fish-scale pits, terrace technique, and check dams.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.100-107
• /
• 2007

People have spent lots of time inside building about 90% of these day. Industry has been developed rapidly after I960. Construction materials had changed from natural materials to chemical materials and confidentiality of building has been more higher than before by policy of saving energy. These have caused sick-building syndrome (SBS) for us. So people want environmental construction materials for their house. We designed a environmental loess (yellow soil) finishing material which was composed of loess, water, water-soluble resin, hardener and filler. The purposes of this study were that making an environmental loess finishing material with optimum ratio, evaluating the usability of loess finishing material for wall. Furthermore it was suitable for wall to evaluate mechanical properties that are impact test, cracking test, abrasion test and de-bonding test, environmental properties that were emission of VOCs, formaldehyde and far infrared radiation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.141-151
• /
• 2010

Harmful algal blooms (HABs), commonly known as red tides, are aquatic phenomena caused by the rapid growth and accumulation of certain microalgae, which can lead to marked discoloration of surface waters, and severe impacts on public health, commerce, and the environment. In South Korea, the red tides have been a serious and recurrent problem, especially along the south coast. Plenty of yellow loess was used to control an outbreak of the red tides for 15 years from 1996 until now. Yellow loess was almost sprayed in the vicinity of a large fish farming industry. In this research, the distribution characteristics and density distribution of zooplankton were investigated in autumn (Oct. 2008) and spring (Apr. 2009) using volume backscattering strength (SV) calculated by the zooplankton collected with north pacific standard (NORPAC) net and the echo intensity measured with ADCP at stations on the study area in the spraying ocean of yellow loess (SOYL), and the non-spraying ocean of yellow ocean (NOYL) by the red tide generating every year. The species number and the individuals per unit volume of the zooplankton collected in NOYL was high and it which was collected in SOYL was low. As a result of comparing the volume backscattering strength ($SV_c$) calculated by species and length of the zooplankton collected with NORPAC net with the volume backscattering strength ($SV_m$) calculated by the echo intensity measured with ADCP at stations on the study area, although $SV_c$ and $SV_m$ of NOYL were generally in agreement, $SV_m$ of SOYL was higher than $SV_c$ 4.3dB, i.e. ADCP is greatly influenced by suspended solid in SOYL. The horizontal distribution map of $SV_m$ at the study area in autumn (Oct. 2008) and spring (Apr. 2009) was drawn. $SV_m$ of SOYL is higher than NOYL and autumn is higher than spring. $SV_m$ can suppress the overestimate or underestimate of $SV_c$.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.1010-1015
• /
• 2008

The effects of heat treatment on the physicochemical properties and mineral composition of sun-dried salt were investigated. The salts parched at high temperature were appeared the higher alkalinity and the lower oxidation-reduction potential (ORP) than the samples without heat treatment. The commercial salts (bamboo salt and yellow loess salt) and the sun-dried salt parched at high temperature had relatively higher sodium ion content (418-450 ppm) compared to that (418.0 ppm) of refined salt. The increase of calcium ion occurred in the salts parched at high temperature compared to the sun-dried salt without heat treatment, but the magnesium ion was vice versa. The commercial salt, yellow loess salt had highest turbidity (0.973) whereas sun-dried salt showed lowest level (0.097) among the tested samples. Turbidity of heat treatment samples decreased as solubility increased. The maximum concentration of dialyzed salt was reached after 4 hr regardless of various processed salts, but those had no difference significantly among the tested samples. The X-ray diffraction patterns of the parched sun-dried salts showed different peak intensity with common salts, and they were similar to the patterns of oxide salts, especially MgO. The maximum value (2.56%) of MgO appeared in the sun-dried salt parched at $1,400^{\circ}C$.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.1
• /
• pp.17-25
• /
• 2014

Periodically, harmful algal blooms (HABs) have occurred, with impacts on various areas including public health, tourism, and aquatic ecosystems, especially aquacultured and caged fisheries. To prevent or manage invasions of HABs into fish farms on an emergency basis, many methods have been proposed. Frequently over the past 30 years in coastal countries, treatments of clay and clay mixed with polyaluminum chloride (PAC) and chitosan have been tested for HAB-removal effectiveness in both the laboratory and the field. In Korea, yellow loess clay (hwangto) has been dispersed using electrolytic clay dispensers, both to decrease the amount of yellow loess clay's usage in containers and enhance HAB-removal efficiency. However, this emergency method has limitations, among which is the requirement for more effective controlling agents for field applications. Thus, in this paper, we review technologies for clay-based red tides prevention and control and their limitations, and, further, introduce next-generation algicidal technologies for the emergency protection of fish farms.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2022

Background: No studies have reported on the effects of loess beddings on insomnia patients. Purpose: It studied the change in quality of life and quality of sleep after having 15 insomnia subjects use the bedding that emits far-infrared rays. Methods: After using loess bedding for the test group and general yellow bedding for the control group, the study was conducted in the form of a questionnaire on the WHO quality of life of the subjects. Results: In the overall quality of life evaluation, the pre-and post-changes significantly improved in the test group. Using loess bedding was greatly enhanced the physical change, the actual sleep time, and the quality of sleep of the test group. The period of sleep was significantly longer post-treating, and the habitual sleep efficiency was considerably higher, and sleep disturbance was significantly lower than before in the test group. Sleep drug use and daytime dysfunction after treating in the test group significantly improved the sleep effect. Changes in the Sociality Scale, Environmental Change Scale, and Quality of Life Scale significantly improved in the test group. The quality of life for 14 items in the test group was significantly correlated. Daytime drowsiness, depression, and anxiety scale changes were significantly improved in the test group. According to the predictive survey, the subjects felt warmth in their body and comfort in mind during and after using loess bedding and evaluated that sleep quality was good. Conclusions: The overall quality of life in the test group increased using loess bedding.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.67-73
• /
• 2004

Dissected erosional surfaces are widely distributed in the western part of Korea (e.g. Icheon, Chungju, Jecheon, Seosan). The deposits with thickness of less than 2m occur on the smooth bedrock surface are composed of poorly sorted subangular gravels with less than 20cm diameter. However, only weathered mantle of granites without the gravel layer are observed at some outcrops. The results of grain size analysis of deposits of Icheon district revealed that the characteristic of the gain size distribution is very similar with the results of sheetflood deposits presented by Blair (1999) in the Death Valley. Loess layer with buried soil layers of MIS7 covers the sheetflood deposits. The loess layer implies that the sheetflood deposits occurred before MIS7 based on the typical Loess sequences presented by Naruse et al.(2003). On the other hand, the climate of Korean Peninsula in MIS2 was very dry and cold (Yoon and Hwnag, 2003) by pollen analysis. This is because Yellow Sea was completely emerged during the MIS2(e.g. Sau\ito, 1998). So, it is thought that the climate in Korean Peninsula of not only MIS2 but also other glacial ages such as MIS8 was similar with present Mongolian climates. Tanaka et al.(2005) pointed out that Hortonian overlandflow occurs in grass vegetated granite basin in Mongolia. Therefore, dissected piedmont gentle slopes in the western Korea were possibly formed by sheetflood erosion during probably MIS8 as pediment widely distributed in Mongolia.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.92-106
• /
• 2004

Elemental dry deposition fluxes were measured using dry deposition plates from March to June 1998 in Seoul, Korea. During this spring sampling period several yellow sand events characterized by long-range transport from China and Mongolia impacted the area. Understanding the impact of yellow-sand events on atmospheric dry deposition is critical to managing the heavy metal levels in the environment in Korea. In this study, the measured flux of a primarily crustal metal, Al and an anthropogenic metal, Pb was used with two hybrid receptor models, potential source contribution function (PSCF) and residence time weighted concentration (RTWC) for locating sources of heavy metals associated with atmospheric dry deposition fluxes during the yellow-sand events in Seoul, Korea. The PSCF using a criterion value of the 75th percentile of the measured dry deposition fluxes and RTWC results using the measured elemental dry deposition fluxes agreed well and consistently showed that there were large potential source areas in the Gobi Desert in China and Mongolia and industrial areas near Tianjin, Tangshan, and Shenyang in China. Major industrial areas of Shenyang, Fushun, and Anshan, the Central China loess plateau, the Gobi Desert, and the Alaskan semi-desert in China were identified to be major source areas for the measured Pb flux in Seoul, Korea. For Al, the main industrial areas of Tangshan, Tianjin and Beijing, the Gobi Desert, the Alashan semi-desert, and the Central China loess plateau were found to be the major source areas. These results indicate that both anthropogenic sources such as industrial areas and natural sources such as deserts contribute to the high dry deposition fluxes of both Pb and Al in Seoul, Korea during yellow-sand events. RTWC resolved several high potential source areas. Modeling results indicated that the long-range transport of Al and Pb from China during yellow-sand events as well as non yellow-sand spring daytimes increased atmospheric dry deposition of heavy metals in Korea.