• 청정기술
• /
• 제17권2호
• /
• pp.110-116
• /
• 2011

본 연구에서는 초임계 이산화탄소를 사용하여 $50{\sim}90^{\circ}C$의 온도와 15~30 MPa의 압력범위에서 두 종류의 분산염료(C.I. Disperse Yellow 54, C.I. Disperse Red 60)를 사용하여 폴리에스테르 섬유의 염색에 대한 연구를 수행하였다. 동일압력(30 MPa)과 밀도(700 kg/$m^3$) 조건에서 Red 60을 이용한 초임계유체 염색을 수행한 결과, 온도 증가에 따라 폴리에스테르 섬유 내에 염착되는 염료의 양이 증가하였으며, Red 60의 경우 $90^{\circ}C$, 30 MPa의 염색 조건에서 240분내에 염착평형상태에 도달하였으나, Yellow 54의 경우는 360분 이상의 염색시간이 요구되었다. 다양한 혼합비율(Red 60/Yellow 54, 0.01~9.0 wt./wt.)로 두 종류의 염료를 배합하여 초임계유체 염색 실험을 수행한 결과 Red 60/Yellow 54의 혼합비에 대한 Red 60/Yellow 54 염착량비는 로그스케일 그래프에서 비례하는 것을 확인하였다. 색상은 두 염료의 중간색인 오렌지색을 얻을 수 있었으며, 색의 짙은 정도는 염료의 혼합비율에 의존하는 것을 확인하였다.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.16-21
• /
• 2000

Measurement of spray deposit is necessary for evaluation of a chemical application technology. However it is not easy and time consuming. A simple method for measuring the deposition amount of spray using a tracer and a spectrophotometer was developed. Various materials were tested to determine an adequate tracer. Food dye was selected as a tracer, because it was cheep and easily treatable. Using NIRS(Near Infrared Reflection Spectrophotometer), a regression curves between maximum absorbance of a solution and concentration of the tracer were obtained. Yellow food dye solution showed a peak of spectrum at 452 nm, and absorbance of peak showed a tendency to increase as concentration increased. Green or pink food dye were tested and judged to be good tracers. However, tracer concentration should not exceed certain limits in order to measure maximum absorption. Using spraying liquid with known tracer concentration and known amount of washing liquid, spray deposit amount on real targets on leaves could be estimated at less than 13% error level.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.67-73
• /
• 1994

The adsorption behaviors of acid dye and disperse dye on silk and nylon fabrics were examined, in one bath dyeing system on silk/nylon blend fabric with disperse dyes and acid dyes. In the dyeing of nylon fabric with C. I. Disperse Red 19 (Red 19) and C. I. Disperse Red 60 (Red 60), dye uptake of Red 19 was higher than that of Red 60. When silk/nylon blend fabric was dyed with Red 19 and Red 0, the dye uptake on nylon was influenced by the ffinity of the dye to the silk fabric. In the dyeing of silk/nylon with C. I. Acid Blue 80 and C. I. Acid Yellow 121, solid shade could not be obtained with the conventional method but could be obtained with the dyeing resist agent for nylon. There was not any relationship between K/S value and Munsell value, but Munsell value tended to change with the K/S value.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.12-19
• /
• 2002

Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.255-261
• /
• 2016

활성탄을 사용한 Acid Yellow 14 염료의 흡착 실험은 흡착제의 양, pH, 초기농도, 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir, Freundlich 및 Temkin 등온식을 사용하여 해석하였는데, Freundlich 식이 가장 좋은 일치도를 나타냈다. 평가된 Freundlich 상수(1/n=0.129~0.212)와 Langmuir 분리계수($R_L=0.202{\sim}0.243$)로부터 활성탄에 의한 Acid Yellow 14의 흡착조작은 적절한 처리방법이 될 수 있음을 알았다. Temkin의 흡착열관련상수(B)는 5.101~9.164 J/mol로 평가되어, 흡착공정이 물리흡착임을 알았다. 흡착속도실험자료를 유사일차반응속도식과 유사이차반응속도식에 적용해 본 결과, 흡착동력학은 유사이차반응속도식에 잘 맞는 것으로 나타났다. Gibbs 자유에너지(-4.81~-10.33 kJ/mol)와 엔탈피(+78.59 kJ/mol)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타낸다.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

• 대한가정학회지
• /
• 제42권7호
• /
• pp.55-61
• /
• 2004

The Purpose or this study was to determine the optimal dyeing condition or Chelidonium majus extracts onto silk fabrics. Among the various dyeing properties, the colorfastness of fabrics dyed with Chelidonium majus extracts was investigated in different conditions such as dyeing temperature, dyeing time, dyeing pH etc. We also tried to dye fabrics using the Chelidonium majus extracts which were lyophilized. Although mordant was not used, dyed fabrics showed relatively good dyeability and the main pigment of Chelidonium majus showed yellow vividly in the appropriate dyeing conditions. At a dyeing temperature above 40$^{\circ}C$, the $\Delta$E value increased but the yellowish tint decreased. The pH value of unadjusted Chelidonium majus extracts was 6.4, at which a deep yellow was obtained. The dye equilibrium was reached 40 minutes after dyeing. The colorfastness to washing and light was poor at 1-2 and 2-3, respectively, but the dry-cleaning fastness was good at 4-5.

• 한국의류학회지
• /
• 제25권3호
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.239-244
• /
• 2004

Solution-cast films of polymethylmethacrylate (PMMA) and polyurethane (PU) containing polymeric styryl dye up to 5 % by weight were prepared to investigate their acid-sensitivity and mechanical and thermal properties. Original red samples due to styryl dye turned out yellow very rapidly as they were exposed to acid vapor of hydrochloric acid or p-toluenesulfonic acid. According to UV/VIS spectroscopic measurements, characteristic peak intensities near 430 nm and 520 nm increased or decreased relatively with exposed amounts of acid, respectively. Both PMMA and PU samples showed uniform color distribution due to a good miscibility between polymer and dye which can be evidenced by measurements of glass transition temperature. No significant difference in acid-sensitivity was found between PU and PMMA except relative absorbance. However, dependence of their mechanical properties on dye content was somewhat different with PU or PMMA. In case of PMMA, modulus and breaking stress increased up to about 50 % with increasing dye content, whereas those of PU samples showed only slight increase. It was ascribed to whether the matrix polymer was in the glassy or rubbery state.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.405-412
• /
• 2001

In order to impart dyeability on to Polypropylene fiber, PP/EVA blend in the form of fibers and film were preparared using melt blending process. Ethylene vinylacetate containing 28wt% of vinylacetate(EVA(28)) was used as a copolymer. In the study of mechanical properties, tenacity and initial modulus decreased with Increasing EVA concentrations, whilst extension at break increased with increasing EVA contents. Their results in the dyeing behavior show that dye adsorption increased with increased EVA contents iota both blend fibers and films. The extent of dye uptake of red dye to modified polypropylene fibers was greater than that of Blue and Yellow counterparts due to the difference behavior of dye particles in dyeing bath.