• Microbiology and Biotechnology Letters
• /
• v.21 no.3
• /
• pp.281-287
• /
• 1993

Rye stillage was adopted as a substrate for the production of yeast biomass by a thermotolerant yeast Candida rugosa isolated from East Africa. In the batch fermentation, the yield of biomass and crude protein reached 4.9-8.4g/l and 2.2-3.5g/l, respectively, the rate of COD reduction was about 20%. Over 90% amount of main components such as glycerol and lactic acid were assimilated, but protein assimilation reached only to 38-45% of the initial content. Crude protein content of the dry yeast biomass produced was 42-47% and sulfur-containing amino acid was revealed as limiting essential amino acid.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.2
• /
• pp.114-116
• /
• 1995

Concentrated Brazillian sugar cane stillage was used as a substrate for the yeast biomass production using Candida rugosa isolated from East Africa. At the optimum stillage concentration of 10% dry matter, biomass production was 20.4 g/l and COD reduction rate was 41%. The specific growth rate of the yeast was 0.17 $h^{-1}$ and the corresponding productivity 0.91 g $l{-1} h^{-1}$ in the batch fermentation was observed at $40{\circ}^C$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.119-125
• /
• 2004

Sugar beet stillages were used as a substrate for the production of single cell protein by a thermotolerant yeast Candida rugosa. 3 Stillage substrates were nutritionally optimized for the better production of yeast biomass and for the reduction of COD. The addition of Phosphorus(P) was required for all stillages, but Nitrogen(N) only when the residual sugar remained. The addition of P increased the biomass production to 23-61%. The addition of N increased the biomass production only a little, but when added together with P increased to 90%. The COD decreased to 26-46% when P was added, but decreased to 85% when P was added together with N.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.3
• /
• pp.263-269
• /
• 1992

Radish green juice was used as a dual source for the production of plant protein precipitate and Candida utilis biomass. Precipitates ranging from 10.0 to 16.5g were obtained from a liter of radish green juice by heating at 80-10$0^{\circ}C$C for 1 to 10 min or by modification of the pH of radish green juice. Crude protein content of the precipitate was between 25 and 38%. The residue remaining after protein precipitation was used in turn for the cultivation of the yeast, C. utilis, in order to produce yeast biomass. C. utilis grew well in radish green residual juice and completed growth within 24 hr at 3$0^{\circ}C$ and 200rpm in shake flask experiments. Maximum dry cell weight obtainable from a liter of radish green residual juice was 19.5g, when the yeast was grown on the juice residue diluted 3 times or more with water to make sugar content be equal to or less than about 1.0%. Supplementation of 3-fold diluted radish green residual juice with yeast extract and (NH$_4$)SO$_4$ enhanced yeast biomass production and cell protein content significantly. Total high protein material obtainable from a liter of radish green juice was 33.0g.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.882-887
• /
• 1996

Production of yeast diet has been carried out in batch fermenters under optimum culture conditions. The fermentation of Candida utilis on a $2\%$ complex medium resulted in 1.22 g/L/h productivity and $65\times10^8$ viable cells/ml, and the addition of $15{\mu}M$ zinc to the medium increased both the productivity and the number of viable cells just a little more. In the case of the fermentation of Kluyveromyces fragilis, the highest value of the biomass productivity, 1.94 g/L/h, was obtained on a $2.5\%$ fructose medium with $70\times10^8$ viable cells/ml, and $1\%$ peptone was found to be a growth factor in this fermentation. When $3.5\%$ NaCl was added to the given medium, both the biomass productivity and the number of viable cells decreased significantly in each fermentation, but this may be considered to preserve yeast diet long without osmotic lysis.

• Journal of Ginseng Research
• /
• v.33 no.3
• /
• pp.183-188
• /
• 2009

To produce ginsenoside-Rg$_3$ enriched edible yeast, ginseng steaming effluent (GSE) was used for yeast cultivation in this study. Four kinds of edible yeasts were cultured in sterilized GSE (2% w/v, pH 6.5), without any nutrient, for 48 h at 30$^{\circ}C$, and their growth and ginsenoside compositions were determined. Among the yeasts, Saccharomyces cerevisiae showed the highest growth in the GSE medium. 267.1 mg of Saccharomyces cerevisiae biomass was produced from 1 g of GSE solid and ginsenoside-Rg$_3$ contents was determined with 0.033 mg. Saccharomyces cerevisiae also showed the best overall acceptability, with a herbal and fermentative flavor and a slightly bitter taste. From these data, we conclude that Saccharomyces cerevisiae is the excellent strain for production of ginsenoside-Rg$_3$ enriched edible yeast using GSE.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.5
• /
• pp.717-725
• /
• 2021

This study aimed to optimize medium composition and culture conditions for enhancing the biomass of Lactobacillus plantarum 200655 using statistical methods. The one-factor-at-a-time (OFAT) method was used to screen the six carbon sources (glucose, sucrose, maltose, fructose, lactose, and galactose) and six nitrogen sources (peptone, tryptone, soytone, yeast extract, beef extract, and malt extract). Based on the OFAT results, six factors were selected for the Plackett-Burman design (PBD) to evaluate whether the variables had significant effects on the biomass. Maltose, yeast extract, and soytone were assessed as critical factors and therefore applied to response surface methodology (RSM). The optimal medium composition by RSM was composed of 31.29 g/l maltose, 30.27 g/l yeast extract, 39.43 g/l soytone, 5 g/l sodium acetate, 2 g/l K₂HPO₄, 1 g/l Tween 80, 0.1 g/l MgSO₄·7H₂O, and 0.05 g/l MnSO₄·H₂O, and the maximum biomass was predicted to be 3.951 g/l. Under the optimized medium, the biomass of L. plantarum 200655 was 3.845 g/l, which was similar to the predicted value and 1.58-fold higher than that of the unoptimized medium (2.429 g/l). Furthermore, the biomass increased to 4.505 g/l under optimized cultivation conditions. For lab-scale bioreactor validation, batch fermentation was conducted with a 5-L bioreactor containing 3.5 L of optimized medium. As a result, the highest yield of biomass (5.866 g/l) was obtained after 18 h of incubation at 30℃, pH 6.5, and 200 rpm. In conclusion, mass production by L. plantarum 200655 could be enhanced to obtain higher yields than that in MRS medium

• The Korean Journal of Mycology
• /
• v.23 no.4 s.75
• /
• pp.354-358
• /
• 1995

A yeast loading biochemical oxygen demand (BOD) sensor was designed and constructed to quickly measure the concentration of biologically assimilable organic substances dissolved in water as BOD values to feed back to the waste water treating processes. The sensitivity of the BOD sensor reached maximum at around pH 7.0 and $30^{\circ}C$ where yeast showed the highest assimilation activity. Biomass also affected the sensor output, and biomass of $ 0.14\;mg/cm^2$ on the dialysis membrane appeared to be the optimum cell mass level. The sensitivity of the sensor depended on the kinds of pollutants and increased considerably when the yeast was preincubated in the solution of respective pollutants before loading on the sensor.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.132-145
• /
• 2023

In this study, culture conditions were optimized to confirm the feasibility of Acetobacter pasteurianus as a starter for fermentation vinegar. Acetobacter pasteurianus strain can be used as a food ingredient. The optimal temperature and pH conditions of the selected Acetobacter pasteurianus SRCM101388 were 28℃ and pH 6.00, respectively. The response surface methodology (RSM) was used to optimize the composition of the medium, and Plackett-Burman design (PBD) was used to obtain the effective selection of culture medium, resulting in that glucose, sucrose, and yeast extract had the highest effect on increasing biomass. The optimal concentration, which was performed by central composite design (CCD), were determined to be 10.73 g/L of glucose, 3.98 g/L of sucrose, and 18.73 g/L of yeast extract, respectively. The optimal concentrations of trace elements for the production of biomass were found to be 1 g/L of ammonium sulfate, 0.5 g/L of magnesium sulfate, 2 g/L of sodium phosphate monobasic, 2 g/L of sodium phosphate dibasic, and the final optimized medium was pH 6.10. When incubated in a 5 L jar fermenter, the SRCM101388 strain showed a faster-dissolved oxygen (DO) reduction at a lower agitation rate (rpm), and it was able to grow even at reduced DO level when aeration was maintained. The amount of final biomass produced was 2.53±0.12×10⁹ CFU/mL (9.40±0.02 log CFU/mL) when incubated for 18 hours at 150 rpm, 0.5 vvm, pH 6.0, and 28℃.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1177-1185
• /
• 2010

To examine the potency of biosorbent, the adsorption capacity of Pseudomonas cepacia H42 isolated from fresh water plant root was compared with Saccharomyces cerevisiae SEY2102 on bases of biomass, concentration of heavy metal, presence of light metals, immobilized cell, and ion exchange resin. P. cepacia H42 biomass of 0.05-0.5 g/L increased adsorption and above 1.0 g/L of yeast biomass was the most effective in adsorption. By applying the same amount of biomass, lead showed the highest adsorption on two strains and the adsorption strength was lead>copper>cadmium on both strains. The high heavy metal concentration induced the high adsorption capacity. P. cepacia H42 adsorption was in the order of copper>lead>cadmium and lead>copper>cadmium by yeast in 10 mg/L. Both strain showed same adsorption strength in the order of lead>copper>cadmium in 100 mg/L and 1000 mg/L. The adsorption capacity of both yeast and P. cepacia H42 was decreased in the presence of light metals and the order of cadmium>copper>lead. $Mg^{2+}$ induced the least adsorption while $Na^+$ induced highest adsorption. The adsorption capacity of immobilized yeast and P. cepacia H42 was detected between 200-400 mL in flow volume and decreased in the presence of light metals. Ion exchange containing light metals caused 30-50% adsorption reduction on both strains.