• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.119-124
• /
• 2012

Recently, Glass Dosimeter (GD) with thermoluminescent Dosimeter (TLD) are comprehensively used to measure absorbed dose from diagnostic field to therapy field that means from low energy field to high energy field. However, such studies about dose characteristics of GD, such as reproducibility and energy dependency, are mostly results in high energy field. Because characteristic study for measurement devices of radiation dose and radiation detector is performed using 137Cs and 60Co which emit high energy radiations. Thus, this study was evaluated the linearity according to Piranha dose which measured by changing tube voltage (50kV, 80kV and 100kV which are low energy radiations), reproducibility and reproducibility according to delay time using GD. Measurement of radiation dose is performed using internal detector of Piranha 657 which is multi-function QA device (RTI Electronic, Sweden). Condition of measurement was 25mA, 0.02sec, 2.5mAs, SSD of 100 cm and exposure area with $10{\times}10cm^2$. As above method, GD was exposed to radiation. Sixty GDs were divided into three groups (50kV, 80kV, 100kV), then measured. In this study, GD was indicated the linearity in low energy field as high energy existing reported results. The reproducibility and reproducibility according to delay time were acceptable. In this study, we could know that GD can be used to not only measure the high energy field but also low energy field.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1117-1132
• /
• 2019

Forest covers 30% of the Earth's land area and plays an important role in global carbon flux through its ability to store much greater amounts of carbon than other terrestrial ecosystems. The Gross Primary Production (GPP) represents the productivity of forest ecosystems according to climate change and its effect on the phenology, health, and carbon cycle. In this study, we estimated the daily GPP for a forest ecosystem using remote-sensed data from Moderate Resolution Imaging Spectroradiometer (MODIS) and machine learning algorithms Support Vector Machine (SVM). MODIS products were employed to train the SVM model from 75% to 80% data of the total study period and validated using eddy covariance measurement (EC) data at the six flux tower sites. We also compare the GPP derived from EC and MODIS (MYD17). The MODIS products made use of two data sets: one for Processed MODIS that included calculated by combined products (e.g., Vapor Pressure Deficit), another one for Unprocessed MODIS that used MODIS products without any combined calculation. Statistical analyses, including Pearson correlation coefficient (R), mean squared error (MSE), and root mean square error (RMSE) were used to evaluate the outcomes of the model. In general, the SVM model trained by the Unprocessed MODIS (R = 0.77 - 0.94, p < 0.001) derived from the multi-sites outperformed those trained at a single-site (R = 0.75 - 0.95, p < 0.001). These results show better performance trained by the data including various events and suggest the possibility of using remote-sensed data without complex processes to estimate GPP such as non-stationary ecological processes.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2014

The continuous observations for atmospheric aerosols were conducted during 3 years (2009 to 2011) by using Gwangju Institute of Science and Technology (GIST) multi-wavelength Raman lidar at Gwangju, Korea ($35.10^{\circ}N$, $126.53^{\circ}E$). The aerosol depolarization ratios calculated from lidar data were used to identify the Asian dust layer. The optical properties of Asian dust layer were different according to its vertical distribution. In order to investigate the difference between the optical properties of each individual dust layers, the transport pathway and the transport altitude of Asian dust were analyzed by Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. We consider that the variation of optical properties were influenced not only their transport pathway but also their transport height when it passed over anthropogenic pollution source regions in China. The lower particle depolarization ratio values of $0.12{\pm}0.01$, higher lidar ratio of $67{\pm}9sr$ and $68{\pm}9sr$ at 355 nm and 532 nm, respectively, and higher ${\AA}ngstr\ddot{o}m$ exponent of $1.05{\pm}0.57$ which are considered as the optical properties of pollution were found. In contrast with this, the higher particle depolarization ratio values of $0.21{\pm}0.09$, lower lidar ratio of $48{\pm}5sr$ and $46{\pm}4sr$ at 355 nm and 532 nm, respectively, and lower ${\AA}ngstr\ddot{o}m$ exponent of $0.57{\pm}0.24$ which are considered as the optical properties of dust were found. We found that the degree of mixing of anthropogenic pollutant aerosols in mixed Asian dust govern the variation of optical properties of Asian dust and it depends on their altitude when it passed over the polluted regions over China.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2004

Peat humin(p-Humin), humic acid(p-HA) and fulvic acid(p-FA) were isolated from Canadian Sphagnum peat moss by dissolution in 0.1M NaOH followed by acid precipitation. After purification cycles, they are characterized for their elemental compositions and, acid/base properties. Functionalities and carbon structures of the humic fractions were also characterized using FT-IR and solid state $^{13}C$-NMR spectroscopy. Those results are compared with one another and with soil humic substances from literatures. Main purpose of this study was to present a chemical and spectroscopic characterization data of humic substance from peat moss needed to evaluate its environmental applicability. The relative proportions of the p-Humin, p-HA and p-FA in the peat moss was $76\%,\;18\%,\;and\;3\%$, respectively, based on the total organic matter content ($957{\pm}32\;g/kg$). Elemental composition of p-Humin were found to be $C_{1.00}H_{1.52}O_{0.79}N_{0.01}$ and had higher H/C and (N+O)/C ratio compared to those of p-HA($C_{1.00}H_{1.09}O_{0.51}N_{0.02}$) and p-FA($C_{1.00}H_{1.08}O_{0.65}N_{0.01}$). Based on the analysis of pH titration data, there are two different types of acidic functional groups in the peat moss and its humic fractions and their proton exchange capacities(PEC, meq/g) were in the order p-FA(4.91) >p-HA(4.09) >p-Humin(2.38). IR spectroscopic results showed that the functionalities of the peat moss humic molecules are similar to those of soil humic substances, and carboxylic acid(-COOH) is main function group providing metal binding sites for Cd(II) sorption. Spectral features obtained from $^{13}C$-NMR indicated that peat moss humic molecules have rather lower degree of humification, and that important structural differences exist between p-Humin and soluble humic fractions(p-HA and p-FA).

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.53-59
• /
• 2001

There is a lot of method to manage the insanitary landfill but vertical cutoff walls have been widespreadly used and were installed into the subsurface to act as a barrier to horizontal groundwater flow, The stabilized material such as specialized cement or mixed soil with additives has been generally applied for the materials of the deep soil mixing barrier in korea. The amount of the stabilized material is dependent on the field conditions, because the mixing ratio of the material and the field soil should achieve a requirement in the coefficient of permeability, lower than 1.0$\times$$10^{7}$cm/sec. This study determined the quantity and optimized function ratio of the stabilized material in the formation process of the mixed barrier that was added with stabilized material on the field soil classified into SW-SC under USCS (Unified Soil Classification System). After that the fly ash and lime were selected as an additives an that could improve the function of the stabilized material and then the method to improve the functional progress in the usage of putting into the stabilized material as an appropriate ratio was studied and reviewed. The author used the flexible-wall permeameter for measuring the permeability and unconfined compressive strength tester for compressive strength, and in the view of environmental engineering the absorption test of heavy metals and leaching test regulated by Korean Waste Management Act were performed. As the results, the suitable mixing ratio of the stabilized material in the deep soil mixing barrier was determined as 13 percent. To make workability easy, the ratio of stabilized material and water was proven to be 1 : 1.5. With the results, the range of the portion of the additives(fly ash : lime= 70 : 30) was proven to be 20-40% for improving the function of the stabilized material, lowering of permeability. In heavy metal absorption assessment of the mixing barrier system with the additives, the result of heavy metal absorption was proved to be almost same with the case of the original stabilized material; high removal efficiency of heavy metals. In addition, the leaching concentration of heavy metals from the leaching test for the environmental hazard assessment showed lower than the regulated criteria.

• 보존과학연구
• /
• s.32
• /
• pp.5-24
• /
• 2011

Neunghwaji(Embossed patterned paper) is a unique paper used for a traditional book cover in Korea. The research was carried out to investigate Neunghwaji's features. Physical property was studied through a test of tensile strength and folding endurance. Also, comparative analysis of virus resistance and waterproof ability was undertaken on Neunghwaji. 1. Folding endurance test showed that strength of non-embossed CB and HB decreased during deteriorating duration. Embossed CN and HN showed the strength increasing at early stage and decreasing from the 27th day of the deteriorating duration. Tensile strength was decreasing in both cases as deterioration progressed. 2. Growth of Arthrinium sp. fungus on embossed paper was 10% less than plain paper while Cladosporium sp. showed 20~30% less growth. Amur cork dyeing(H) showed 10~30% lower fungi growth than Gardenia seed dyeing(C). The result indicated that embossed paper has better virus resistance than Hanji, and Amur cork dyeing has better virus resistance than Gardenia seed dyeing. 3. Average contact angle of CN, CB, HN, and HB was $85{\sim}92^{\circ}$ and NON-N and NON-B was $59{\sim}63^{\circ}$. In detail, CN's contact angle was $1{\sim}7^{\circ}$ higher than CB's; HN was $1{\sim}6^{\circ}$ higher than HB. Therefore, it was found that embossed paper has higher contact angle than Hanji thus the former has better waterproof ability. The research suggested production technique of Neunghwaji and studied its features related to the technique. Neunghwaji was confirmed to have superior quality to Hanji though further study regarding above test result is needed to complement the research.

• Korean Journal of Poultry Science
• /
• v.20 no.3
• /
• pp.133-140
• /
• 1993

A study was conducted to investigate the concentrations of Ca, P and ash in metatarsal bone of broiler chicks exposed to UV light in different Interval. Day-old Hubbard broiler chicks (199＝10 control＋3 irradiation interval $\times$ 9 elapsed time $\times$ 7 replicate) were fed vitamin D3 deficient diet for 3 wk in a windowless subdued-light room and exposed to 297 nm UVB light by 0.068 mJ/$\textrm{cm}^2$ three times In 0, 12 or 24 h interval. The metatarsal bones were taken at 0, 6, 12, 18, 24, 48, 96, 144 or 240 h after last irradiation, separated from adhering tissue, ether extracted, dried and ashed. The Ca concentration was measured by atomic absorption spectrophotometry and P by ammonium metavanadate colorimetry. When the birds were continuously exposed to UVB light for 30 min without interval, the Ca content in metatarsus increased gradually according to the time after irradiation and reached the highest value 16.75% at 240 h after exposure. The P content also increased gradually until 144 h, where it was 9.75%. The ash content in metatarsus increased continuously until 240 h, the final time in this research, where 42.75% was shown. As 10 min three times irradiation in 12 h interval was applied to the chicks, the metatarsal Ca presented a small peak(13.31%) at 12 h after irradiation and a large peak(16.91%) at 144 h. P content showed a small peak(7.18%) at 12 h and a large level(8.34%) at 240 h. Ash content increased continuously until 240 h, where it was 46.53%. The small peaks in Ca and P concentration were thought to be derived from preirradiation at 12 and 24 h before final irradiation for 10 min. When 24 h interval system was treated, the peak value of Ca content(24.18%) occurred earlier(96 h) than those in 0 and 12 h interval systems. P content also showed the maximum value at 96 h(7.29%). Ash content presented an increasing trend until 240 h, where 45.75% was appeared. In respecting the method of UVB irradiation, the peak value of Ca content in metatarsus appeared earlier in 24 h interval system than in other systems. Meanwhile the ash contents in metatarsus of birds exposed to UVB light in 12 and 24 h interval procedures were higher than those in 0 h interval one. Therefore, it was concluded that a daily 10 min irradiation of UVB light would be desirable for increasing the Ca and ash content in metatarsus of brolier chicks.

• Korean Journal of Poultry Science
• /
• v.43 no.2
• /
• pp.111-118
• /
• 2016

Mycotoxins are secondary metabolites produced by molds, such as Aspergillus, Fusarium and Penicillium, that have adverse effects on animals and humans. Aflatoxin, ochratoxin, zearalenone, fumonisin and deoxynivalenol are the mycotoxins of greatest agro-economic importance and cause acute disease called mycotoxicoses. Mycotoxicosis in poultry birds results in decreased meat/egg production, immunosuppressant, and hepatotoxicosis. Some of toxins or their metabolites may be retained in animal or human tissues and induce health problems. This study was designed to develop a sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the simultaneous detection and quantification of mycotoxins, such as aflatoxin $B_1$, aflatoxin $M_1$, ochratoxin A, zearalenone, fumonisin B and deoxynivalenol, in chicken liver and kidney tissues. The mycotoxins were extracted and purified using modified QUECHERS methods, separated by LC and detected by an electrospray ionisation interface (ESI) and tandem MS. Good precision and linearity were observed for most of six mycotoxins. The recovery test for each mycotoxin in liver and kidney tissues mostly indicated good average recovery rates between 80.94% and 98.10% and the coefficient of variation mostly under 13.78%, except for aflatoxin $M_1$ and fumonisin $B_1$. The limit of detection (LOD) for six mycotoxins was $7.6{\sim}145.79{\mu}g/kg$ in liver tissues and $6.07{\sim}197.20{\mu}g/kg$ in kidney tissues. The quantification limits (LOQ) for 6 mycotoxins were in the range $23.04{\sim}441.78{\mu}g/kg$ in liver tissues and $18.40{\sim}597.59{\mu}g/kg$ in kidney tissues, respectively. The developed multi-mycotoxin method in this study permits simultaneous, simple, and rapid determination of several co-existing mycotoxins in chicken liver and kidney tissues.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.57-65
• /
• 2000

Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.

• Journal of Chest Surgery
• /
• v.38 no.6 s.251
• /
• pp.403-409
• /
• 2005

Pulmonary atresia with intact ventricular septum is morphologically heterogeneous, and the surgical outcome remains suboptimal compared to other complex congenital heart defects. We evaluated the long-term results for repair of pulmonary atresia with intact ventricular septum, Material and Method: Between January 1992 and June 2004, 38 patients underwent repair of pulmonary atresia with intact ventricular septum. The average age was 18 days $(2\~382\;days)$. The average Z-value of the tricuspid annulus diameter was -3.1$(-5.6\~0.8)$. Thirteen $(36\%)$ patients had right ventricle-to-coronary artery fistulas, and $4(11\%)$ patients had right ventricle-dependent coronary circulation. Average follow-up was 55 months $(3\;months\~2.2\;years)$, Result: Twenty-four patients under-went initial right ventricle (RV) decompression and 14 patients underwent systemic-to-pulmonary arterial shunt only. The average size of the tricuspid annulus of the patients who underwent RV decompression was significantly larger than that of the patients who underwent systemic-to-pulmonary arierial shunt only (Z-value -2.2 vs. -4.8, p=0.000). There were $5(13\%)$ early and 1 late deaths. Early deaths occurred in 3 patients who had undergone RV decompression, and in 2 patients who had undergone systemic-to-pulmonary arterial shunt only (p=1.0). Biventricular repair was achieved in $12(32\%)$ patients, single ventricular repair in $8(21\%)$, and one and a half ventricular repair in $4(l1\%)$ patients. Nine $(24\%)$ patients are waiting for the definitive repair. Kaplan-Meier survival at 5 and 8 years was $83.2\%$, respectively. Conclusion: Most of the deaths occurred after the initial palliation. Overall long-term survival was satisfactory. Early mortality should be reduced with careful preoperative evaluation and proper surgical strategy.