• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.495-498
• /
• 1998

Mobile computers have restrictions for size, weight, and power consumption that are different from traditional workstations. Storage device must be smaller, lighter. Low power consumed storage devices are needed. At the present time, flash memory device is a reasonable candidate for such device. But flash memory has drawbacks such as bulk erase operation and slow program time. This causes of worse average write performances. This paper suggests a storage method which improves write performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.91-95
• /
• 2008

Flash memory is widely used in embedded systems because of its benefits such as non-volatile, shock resistant, and low power consumption. But NAND flash memory suffers from out-place-update, limited erase cycles, and page based read/write operations. To solve these problems, log-structured filesystem was proposed such as YAFFS. However, YAFFS sequentially retrieves an array of all block information to allocate free block for a write operation. Also before the write operation, YAFPS read the array of block information to find invalid block for erase. These could reduce the performance of the filesystem. This paper suggests fast operation method for NAND flash filesystem that solves the above-mentioned problems. We implemented the proposed methods in YAFFS. And we measured the performance compared with the original technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.46-56
• /
• 1991

In this paper, 16word X 8bit Content Addressable and Reentrant Memory(CARM) is described. This device has 4 operation modes(read, write, match, reentrant). The read and write operation of CARM is like that of static RAM, CARM has the reentrant mode operation where the on chip garbage collection is accomplished conditionally. Thus function can be used for high speed matching unit of dynamic data flow computer. And CARM also can encode matching address sequentially according to therir priority. CARM consists of 8 blocks(CAM cell, Sequential Address Encoder(S.A.E). Reentrant operation. Read/Write control circuit, Data/Mask Register, Sense Amplifier, Encoder. Decoder). Designed DARM can be used in data flow computer, pattern, inspection, table look-up, image processing. The simulation is performed using the QUICKSIM logic simulator and Pspice circuit simulator. Having hierarchical structure, the layout was done using the 3{\;}\mu\textrm{m} n well CMOS technology of the ETRI design rule.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.70-74
• /
• 2010

As the storage capacity of the flash memories increased portable devices began to store mass amount of multimedia data on flash memory. Therefore, there has been a need for an effective data management scheme by indexing structure. Among many indexing schemes, M-tree is well known for it's suitability for multimedia data with high dimensional matrix space. Since flash memories have writing operation restriction, there is a performance limitation in indexing scheme with frequent write operation. In this paper, a new node split method with reduced write operation for m-tree indexing scheme in flash memory is proposed. According to experiments the proposed method reduced the write operation to about 7% of the original method. The proposed method will effectively construct an indexing structure for multimedia data in flash memories.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.9-17
• /
• 2019

In this paper, we propose a block mapping technique applicable to NAND flash memory. In order to use the NAND flash memory with the operating system and the file system developed on the basis of the hard disk which is mainly used in the general PC field, it is necessary to use the system software known as the FTL (Flash Translation Layer). FTL overcomes the disadvantage of not being able to overwrite data by using the address mapping table and solves the additional features caused by the physical structure of NAND flash memory. In this paper, we propose a new mapping method based on the block mapping method for efficient use of the NAND flash memory. In the case of the proposed technique, the data modification operation is processed by using a blank page in the existing block without using an additional block for the data modification operation, thereby minimizing the block unit deletion operation in the merging operation. Also, the frequency of occurrence of the sequential write request and random write request Accordingly, by optimally adjusting the ratio of pages for recording data in a block and pages for recording data requested for modification, it is possible to optimize sequential writing and random writing by maximizing the utilization of pages in a block.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.41-46
• /
• 2010

Recently, Flash Memory Drives are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant Array of Independent Disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based storage management improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.59-62
• /
• 2000

As the density of memories increases, unwanted interference between cells and coupling noise between bit-lines are increased and testing high density memories for a high degree of fault coverage can require either a relatively large number of test vectors or a significant amount of additional test circuitry. From now on, conventional test algorithms have focused on faults between neighborhood cells, not neighborhood bit-lines. In this paper, a new algorithm for NPSFs, and neighborhood bit-line sensitive faults (NBLSFs) based on the NPSFs are proposed. Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a three-cell layout which is minimum size for NBLSFs detection is used. To consider faults by maximum coupling noise by neighborhood bit-lines, we added refresh operation after write operation in the test procedure(i.e., write \longrightarrow refresh \longrightarrow read). Also, we present properties of the algorithm, such as its capability to detect stuck-at faults, transition faults, conventional pattern sensitive faults, and neighborhood bit-line sensitive faults.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.4
• /
• pp.274-282
• /
• 2016

This paper proposes code optimization techniques to reduce energy consumption of complex multimedia applications in a hybrid memory system with volatile dynamic random access memory (DRAM) and non-volatile spin-transfer torque magnetoresistive RAM (STT-MRAM). The proposed approach analyzes read/write operations for variables in an application. Based on the profile, variables with a high read operation are allocated to STT-MRAM, and variables with a high write operation are allocated to DRAM to reduce energy consumption. In this paper, to optimize code for real-life complicated applications, we develop a profiler, a code modifier, and compiler/link scripts. The proposed techniques are applied to a Fast Forward Motion Picture Experts Group (FFmpeg) application. The experiment reduces energy consumption by up to 22%.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.561-562
• /
• 2006

This paper presents an SRAM which uses the technique to equalize the internal cell node by adding an NMOS transistor. Accordingly, the write driver operates rapidly in a differential current of bit lines, and the operation speed of SRAM improves. An SRAM was implemented with a memory cell, a sense amplifier and a write driver. The SRAM obtained the performance of 18% power reduction and improvement of 56% operation speed. And Power delay product was reduced with 63%. The proposed SRAM was designed based on a 0.35um 1P4M CMOS technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4997-5006
• /
• 2010

A flash-memory-based SSDs(Solid State Disks) are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant array of independent disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based scheme improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing. Our test results show that our scheme significantly reduces the write operation overheads and freezing overheads, and improves the performance of traditional SSD-RAID-1 scheme by 18 percent, and the response time of the scheme by 38 percent.