• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.250-256
• /
• 1999

A wrapped fruit-vegetable can restrain from evaporating its water, help to be supplied with a little fresh air, prevent from injuring and damaging during transporting to other positions. Therefore, this study was carried out to develop an automatic wrapping system specifically tailored to pack up from one to four numbers of long type fruit-vegetable in wrap foil. Performance tests of the system were conducted by using three different kinds of fruit-vegetable (cucumber, eggplant, Pumpkin) to determine the success wrapping rate. Each fruit-vegetable is divided into two grades such as A grade and B grade. B grade is more bended curve than A grade. The success wrapping rate of eggplant was 100% regardless of the grade and the number of fruit-vegetable. and also that of cucumber was 100% all but packing 4 numbers of B grade. However, that of pumpkin was 45%, As the number and the bended degree of pumpkin was increased, the success wrapping rate of pumpkin was decreased, because the surface area or the bended degree were increased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.955-963
• /
• 2008

In this paper, we propose an improved practical encryption and fault-tolerance decryption method using a non-negative value key and random function obtained with a white noise by using iterative phase wrapping method. A phase wrapping operating key, which is generated by the product of arbitrary random phase images and an original phase image. is zero-padded and Fourier transformed. Fourier operating key is then obtained by taking the real-valued data from this Fourier transformed image. Also the random phase wrapping operating key is made from these arbitrary random phase images and the same iterative phase wrapping method. We obtain a Fourier random operating key through the same method in the encryption process. For practical transmission of encryption and decryption keys via Internet, these keys should be intensity maps with non-negative values. The encryption key and the decryption key to meet this requirement are generated by the addition of the absolute of its minimum value to each of Fourier keys, respectively. The decryption based on 2-f setup with spatial filter is simply performed by the inverse Fourier transform of the multiplication between the encryption key and the decryption key and also can be used as a current spatial light modulator technology by phase encoding of the non-negative values. Computer simulations show the validity of the encryption method and the robust decryption system in the proposed technique.

• Computers and Concrete
• /
• v.27 no.1
• /
• pp.41-54
• /
• 2021

This paper introduced three new strengthening systems for isolated footings: BFRP wrapping system, CFRP wrapping system, and steel jacketing system. The proposed systems are more practical than the current traditional methods, which involves installing many dowel bars and splicing reinforcing steels to join new and old concrete segments. In the proposed three new systems, BFRP wraps, CFRP wraps, or steel jackets are installed on the exterior surface of the enlarged footing, with construction adhesive or a few steel dowels being applied to the contact surfaces. To investigate the effectiveness of three systems, forty-four models were constructed in ABAQUS, with different parameters being considered. All footings investigated failed in punching shear, including original and retrofitted footings. According to FEA results and parametric studies, the three strengthening systems were capable of improving the punching shear resistance of footings. By introducing a new factor η, the punching shear equation in Eurocode 2 was modified to predict the punching shear resistances of the strengthened footings. A linear formula was developed to present the relationship between the new factor η and the investigated parameters.

• Journal of Animal Environmental Science
• /
• v.20 no.3
• /
• pp.105-116
• /
• 2014

In this study, we developed a fermented TMR producing system which could a continuous operation of baling and wrapping the mixed TMR. The baling part has fixed chamber of dia. 900 mm and width 900 mm. And the the turn-table type wrapping part is very compact compared to conventional one in market. The test result were: The absorbed power of the prototype in working was 9.0~15.7 kW. The combined baling and wrapping performance was over 20 bales/hr. The leakage in the process was around 1.9 kg for making a 350 kg TMR bale. The diameter of wrapped TMR bale was 900~950 mm, and its weight was 350 kg in average. Therefore the density was $718kg/m^3$, and it was very high density to the inputted TMR. The pH of the fermented TMR was 5.0~5.6 which was similar to the fermented haylage, also the TMR had no butyric acid's odor.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.428-436
• /
• 2017

State-of-the-art processors require increasingly complicated memory services for high performance and low power consumption. In particular, they request transfers within a burst in a wrap-around order to minimize the miss penalty of a cache. However, synchronous dynamic random access memories (SDRAMs) do not always generate transfers in the wrap-round order required by the processors. Thus, a memory subsystem rearranges the SDRAM transfers in the wrap-around order, but the rearrangement process may increase memory latency and waste the bandwidth of on-chip interconnects. In this paper, we present a memory subsystem that is effective for the wrapping bursts of a cache. The proposed memory subsystem makes SDRAMs generate transfers in an intermediate order, where the transfers are rearranged in the wrap-around order with minimal penalties. Then, the transfers are delivered with priority, depending on the program locality in space. Experimental results showed that the proposed memory subsystem minimizes the memory performance loss resulting from wrapping bursts and, thus, improves program execution time.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.11-18
• /
• 2002

One of the major obstructing factors against managing dairy farm in Korea has been a shortage of roughage supply, which resulted in excessive abuse of concentrate feed. In order to solve this problem, production of the wrap silage by the winter cereal forages raised in the fallow paddy field is strongly recommended in Korea. The main objective is to develop a tractor attached round bale wrapper which can process the silage by wrapping the round bales with thin plastic films. This is the first half of the study which is divided by two parts. In this first part, bale wrapping process was analyzed, and based on this results the followings were designed, developed and tested. 1. Bale wrapper which haying the maximum capacity of 1 ton bale with various functions such as loading, wrapping, discharging the round bales and supplying and cutting wrap films was designed. 2. An actuator and its hydraulic circuit of each process were developed and tested. 3. Also, the variations of hydraulic pressure and engine speed were investigated by operating bale wrapper developed. In this test, maximum pressure of the hydraulic circuit for the bale wrapping was 130 kg/㎠ when it raised the bale, which was quite below the relief pressure of 170 kg/㎠ of hydraulic circuit. In the engine speed test, speed drop was 20∼67 rpm, which meant that there was no over-load operation. Therefore, the experiment proved that developed hydraulic circuit and mechanism is stable in bale wrapping operation

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.333-341
• /
• 2004

Along with the innovative enhancement of Internet technology and the emergency of distributed systems extended from client-server computing, it becomes indispensible and necessary to integrate and interconnect old legacy systems. Since building a distributed system requires consistency of integration, the proper reuse of incumbent systems is critical to successful integration of current systems to distributed ones. CORBA(Common Object Request Broker Architecture) and object wrapping technique can provide middleware solutions that extend the applications of a legacy system with little modification to the application level while keeping client consistency of standard interface. By using these techniques for system integration it is easier and faster to extend services on application development to distributed environments. We propose a model on object wrapping system that can manage, integrate, and separate the functions delivered from CORBA. We apply the object wrapping model specifically to integration of security system interfaces and also perform a test to verify the usability and the efficiency of our model.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.608-611
• /
• 2004

Grid computing environment can be used to interconnect a wide variety of geographically distributed heterogeneous computing resources based on high-speed network. To make business service, it is necessary for Grid accounting system to measure the computational cost by consuming computer resources. To collect resource consumption data, and to keep track of process without needing to recompile kernel source, we use system call wrapping. By making use of this technique, we modifies system call table and replace existing system call to new system call that can monitor processes running in CPU kernel currently. Therefore we can measure user process resource usage for Grid accounting system.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.372-376
• /
• 2012

Carbon nanotubes (CNT) are considered as one of ideal nano-fillers in the field of composites with their excellent electrical, mechanical, and thermal properties. Therefore CNT composites are increasingly used in fabricating conductive materials, structural materials with high strength and low weight, and multifunctional materials. The main problem of the CNT composites is difficulty in the dispersion of CNT in the polymer matrix. In this study multi-walled carbon nanotubes (MWNT) were pretreated by the physical process utilizing a wrapping method. After the pretreatment polymer/MWNT nanocomposites were prepared by melt processing. The effect of functionalization MWNT by wrapping with styrene acrylonitrile (SAN) on the mechanical and electrical properties of acrylonitrile butadiene styrene resin (ABS)/MWNT composites was studied by comparing the properties of ABS mixed with the neat MWNT. Electrical and mechanical properties of ABS/MWNT nanocomposites were studied as a function of the functionalization and content of MWNT. The tensile strength of the ABS/MWNT nanocomposites increased, but the impact strength decreased. The polymer wrapping in ABS system has little effect on the improvement of electrical properties.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.31-38
• /
• 2005

In this paper, we proposed an optical security system based on a gray-image exclusive-OR encryption using multi-phase separation and phase-wrapping method. For encryption, a gray image is sliced into binary images, which have the same pixel value, and these images are encrypted by modified XOR rules with binary random images. The XORed images and the binary images respectively combined and converted into full phase images, called an encrypted image and a key image. For decryption, when the encrypted image and key image are used as inputs on optical elements, Practically due to limited controllability of phase range in optical elements, the original gray image cannot be efficiently reconstructed by these optical elements. Therefore, by decreasing the phase ranges of the encrypted image and key image using a phase-wrapping method and separating these images into low-level phase images using multi-phase separation, the gray image can be reconstructed by optical elements which have limited control range. The decrytion process is simply implemented by interfering a multiplication result of encrypted image and key image with reference light. The validity of proposed scheme is verified and the effects, which are caused by phase limitation in decryption process, is analyzed by using computer simulations.