• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.362-367
• /
• 2007

A total of 5 female elk deer (220 $kg{\pm}10$ kg) were included in a study on the changes in physico-chemical properties of deer meat during storage at $4^{\circ}C$. The deers were exposed to normal pre-slaughter handling and put under anesthesia before slaughtered. The loin and leg cuts were deboned from the carcass after 24hrs slaughter. The samples weighing approximately 300 g were packaged using three packaging methods : Atmospheric packaging(A), Vacuum packaging (V) and Modified atmospheric at packaging (M: 80% $CO_2$ +20% $N_2$)and stored for 3, 7, 11, 15, 20 and 25days at $4^{\circ}$. The ability of moisture maintenance tended to be decreased with the passage of storage time, and that of the meats treated with the vacuum wrapping was lower than that with other wrapping methods. TBARS values of the meats with the regardless of treatments was increased with the passage of storage time, although the values with vacuum wrapping was lowest. VBN values of the meats with the regardless of treatments was also increased with the passage of storage time, although the values with vacuum wrapping was also lowest. The pH values of the meats with the regardless of treatments was also increased with the passage of storage time, although the values with vacuum wrapping was also lowest. For the meat softness, the value of the meats treated with atmospheric packaging was increased with the passage of storage time, but the values with vacuum wrapping and modified atmospheric packaging were respectively decreased. There were no significant differences in luminosity of leg, although loin treated with vacuum wrapping was significantly brighter than that with atmospheric packaging and modified atmospheric packaging. In general, the index of red color of the meats treated with vacuum wrapping was higher than that with atmospheric packaging and modified atmospheric packaging. The index of yellow color tended to be decreased after increment for a time with the passage of storage time, although the value with vacuum wrapping was generally higher than that with other wrapping methods.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.291-294
• /
• 2005

Presented are the results of recent tests on diagonal shear failure of reinforced concrete beams which are externally reinforced in the transverse direction by a unidirectional carbon fiber reinforced polymer, instead of the traditional steel stirrups. Three different series of the beams with different shear reinforcements, i.e. U-wrapping with carbon sheet, U-wrapping with carbon strips and full wrapping with carbon strips were tested. Those beams were geometrically similar, and the size range is 1:1.9:4. The failure of the beams are characterized by delamination, crushing of concrete and distributed shear cracks. It is found that the size effect is much weaker than that of the reference beams without CFRP. Therefore CFRP sheet may be used as the transverse reinforcement with a minor size effect. However, it is not clear that the same conclusion can be drawn in other sizes. Further researches are recommended.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.250-253
• /
• 2006

This paper presents experimental studies on investigating the seismic retrofit performance of reinforced concrete circular columns with poor lap-splice details using GFRP wrapping. Four 1/2 scale-down model columns have been tested. The as-built column is expected to suffer brittle failure due to the bond failure of lap-spliced longitudinal reinforcement. The retrofitted columns using GFRP wrapping showed significant improvement of seismic performance.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.77-82
• /
• 1983

The ventilation of cigarette samples made by the combination of various acetate tow denier and porous plug wrapping paper have been investigated The ventilation rate increased no longer in the acetate tow with high mono denier and low total denier but changed slightly in that with low mono denier and high total denier when the porosity of plug wrapping paper was more than 6500cm/min. cbar. Tip pressure drop ratio, Y, was significantly influenced by tip ventilation rate, X. i. e., Y = 1.0880-0.0042x The relationships of ventilation rate, $X_v$. and smoke delivery, Y, were as follows; Tar : $Y_r$= -14.0458-0.1650$X_v$ Nicotine : $Y_N$= - 1.1045-0.0125$X_v$ CO : $Y_{co}$=17.2806-0.2090$X_v$

• Journal of environmental and Sanitary engineering
• /
• v.7 no.1
• /
• pp.95-102
• /
• 1992

This study was carried out to investigate the domestic solid wastes which produce through the daily life. As the valuable resources, the wrapping materials were focused for the main subject together with the kitchen garbage which is concerned with actual situation. The solid wastes must be recovered and reused effectively under the proper management as the resources, while, the kitchen garbage have to consider with viewpoint of the diminution for the treatment cost and the national economy. Nowadays, the wrapping wastes occupied more than sixty percent of the total domestic wastes in Korea. On the other hand, wrapping paper occupied over fifty percent of the total goods package in the supermarket, therefore, every citizen should aware of the problem and participate the action plan to minimize the daily life wastes.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• Fashion & Textile Research Journal
• /
• v.2 no.5
• /
• pp.443-449
• /
• 2000

An investigation of the relative velocity of friction surface for the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by passing the yarn without a special driving device. This research is theoretically composed of the analysis of the false twisting mechanism. The equations were derived by using the conical angle of the cone drum, projected wrapping angle, and yarn helix angle. Theoretical values of the relative velocity of friction surface were calculated and discussed. It is shown that, as the projected wrapping angle increased, the relative velocity of friction surface decreased. But as the conical angle increased the relative velocity of friction surface also increased.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.193-199
• /
• 2006

Fruit bagging paper is used for protecting of fruits from insect and/or microorganisms. Generally, fruit bagging paper controled light, temperature and humidity and then it is used for good fruit color, size and taste. The physical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. And also, the optical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. The chemical additives and residual herbicide in conventional fruiting bag and wrapping paper were analyzed and compared to each other. The analyzed data was bench marked for developing water repelling paper and embossing paper.

• Journal of Chest Surgery
• /
• v.5 no.1
• /
• pp.25-28
• /
• 1972

Patent ductus arteriosus is one of the most common congenital heart diseases, which treated operatively has excellent results. Treatment by surgical means is common and invariably successful. However,infected PDA cases present problems and surgeons operating must face the possibility of adhesions,aneurysmal dilatation and friabiilty of tissue with tearing of the pulmonary arterial end, especially, which causes a fatal hemorrhagic ccmplication. In the earlier days of cardiac surgery, many surgeons deferred operative treatment infected PDA because of frequent complications, high postoperative morbidity and mortality. This continued until Touroff et al. successfully divided the infected PDA in 1940. In 1944, Harper et aI. have used Cellophane for the wrapping of the infected PDA. This surgical procedure has become a single, simple and safe method for treating infected PDA, since that time. In the Teflon wrapping technique, a cardiothoracic team of Yonsei University Severance Hospital used Teflon felt instead of Cellophane in one case of infected PDA and this method proved intractable to antibiotic treatment for 40 days.

• Journal of Chest Surgery
• /
• v.34 no.8
• /
• pp.648-650
• /
• 2001

Bleeding from anastomotic site in operation for aorta has been troublesome, because it has influence on postoperative morbidity and mortality. Therefore, hemostasis is very important. We describe a simple and effective method for achieving hemostasis of the anastomotic site in aortic surgery. By wrapping around anastomotic site with remnant artificial vascular graft, we have acquired good results.