• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.1
• /
• pp.83-88
• /
• 2014

A new shell divider was manufactured according to the principle of the lever in order to improve working efficiency in collecting the gonad of Sea Urchin, Anthocidaris crassispina, around the coast of jeju. It was composed of three parts of a pair of handles for grasping power, a fulcrum and a pair of knives for action with 21cm in length and 13cm in width. The operating efficiency of the shell divider was tested out in three place of Jeju coast. Statistical significances of differences of working time between test groups were calculated according to the t-test with the level of significance. In dividing the shell of sea urchin, the average of about 3 seconds of working time by the shell divider was less than that by a knife. At the result of t-test, the statistical significance in the working time existed between the divider group and the knife group. On the other hand, the working time among the divider operators showed no significant differences. It is concluded that the shell divider is more efficient than a knife in traditional operating.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.217-219
• /
• 2009

A GMI magnetic field sensor working based on time-coded principle has been investigated and designed. The laboratory model has been constructed and tested carefully, demonstrating the sensitivity of $3\;{\mu}s/{\mu}T$ in the field range of ${\pm}100\;{\mu}T$. An amorphous thin wire, $100\;{\mu}m$ in diameter ${\times}50\;mm$ in length, was chosen to be sensing element which was fit into a small field modulation coil of 60 mm in length. The sensor is working based on a time-coded principle that, with the magnetic field modulation was chosen in range of hundreds of Hz, the change in time interval of two adjacent GMI peaks relating to external DC magnetic field is proportional to the intensity of the external field to be measured. This mechanism has made a great improvement to the linearity of the sensor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1134-1139
• /
• 2003

Vibration problems are an intrinsic characteristic in a washing machine owing to rotation working mechanism. Therefore, a right comprehension of working principle and the analysis on dynamic behavior of a washing machine is essential to design anti-vibration or vibration reduction. In this paper, we choose two kinds of a washing machine: a suspension type pulsator/drum type washing machine. Each the structure and working principle of a washing machine is discussed briefly and the dynamic behavior of it is investigated, then, the vibration detection problems of transient or excessive vibration is tented in each category. Some vibration experimented results in a washing machine are presented also.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1327-1332
• /
• 2000

Ultrasonic motors have an advantage over conventional electro-magnetic motors because of its excellent characteristics, such as high torque, low speed output, compact size, excellent controllability and, above of all, quite operation. The principle of operation of ultrasonic motors is to generate gross mechanical motion through the amplification and repetition of micro-deformations of active materials. A brief description of working principle and methods of analysis of dynamic behaviors of ultrasonic motors are given for the extended research and development activities anticipated in the mechanical engineering community.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.274-285
• /
• 2021

Objectives: The question of whether the level of fees paid to working environment measurement agencies is appropriate has long been a matter of concern to the government. In addition, measurement institutions express dissatisfaction with their level of compensation, which has a great influence on the evaluation of a subject's policy. This study is intended to find a way to appropriately calculate working environment measurement fees. Methods: We looked at the principle of fee determination as a basic theory of fee calculation used in fee calculation, the legal and academic aspects of the general method of fee calculation, and government cost calculation standards. Furthermore, we reviewed the research methods applied so far to derive a method of calculating fees appropriate for this environment. Results: The working environment measurement environment is different from other commission calculation environments. The other environment is to appropriately calculate the service price provided by a monopoly public enterprise, while the situation is to appropriately calculate the fees provided by competitive private enterprises. Therefore, the service delivery environment and the delivery entity are different. In this case, the appropriate method of calculating service fees would be competitive pricing. There have also been many problems under the method of calculation by service cost. Conclusions: First, the working environment measurement fee requires an accounting correction of endogenous variables. Second, the theory of calculating fees appropriate for this situation is appropriate for competitive pricing that applies to private competitors. Third, the government should make efforts to make the service supply market a fully competitive market while ensuring that the service fee level is determined at the marginal cost level. Fourth, economically, research on marginal cost levels is needed.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.81-88
• /
• 2008

The security threat posed by worms has steadily increased in recent years. This paper discusses the application of the optimal and sub-optimal Internet worm control via Pontryagin's maximum principle. To this end, a control variable representing the optimal treatment strategy for infectious hosts is introduced into the two-factor worm model. The numerical optimal control laws are implemented by the multiple shooting method and the sub-optimal solution is computed using genetic algorithms. Simulation results demonstrate the effectiveness of the proposed optimal and sub-optimal strategies. It also provides a theoretical interpretation of the practical experience that the maximum implementation of treatment in the early stage is critically important in controlling outbreaks of Internet worms. Furthermore, our results show that the proposed sub-optimal control can lead to performance close to the optimal control, but with much simpler strategies for long periods of time in practical use.

• Culinary science and hospitality research
• /
• v.5 no.1
• /
• pp.151-172
• /
• 1999

This research is carried to understand school meal system problems and to present a means of settling. To carry this problem, I analysised the elementary school's meal service system in cheju island and presented a means of settling, As we know the situation in cheju island a meal service by their school is regard the one of the best way in the school-meal-service will be possible when central government and local government with related school meal service cooperate one another and prepare financial working principle. Especially, to mange effective a meal service in the school is need to activate the committee essentially, We can conference main articles about a meal service with an administrative organ through the committee. We will be able to expect financial support to need to management and development from committee.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.215-218
• /
• 2004

This paper is about a study of development on multi crusher system. This system use the principle of the Yeon-Ja-Bang-A. This system consists of the power part and the power transmit part, the Yeon-Ja Stone part, the crusher part, an input part, an output part. The advantage of this system decrease about working hours and installation aera.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.221-224
• /
• 2010

A laboratory sensor model was designed, constructed, and tested based on a newly proposed working principle of magnetic field detection. The principle of sensing employed a time-coded method in correlation with exploiting the advantageous features of the GMI effect. The sensor demonstrated a sensitivity of $10\;{\mu}s/{\mu}T$ in the field range of ${\pm}100\;{\mu}T$. The sensing element in the form of an amorphous thin wire, $100\;{\mu}m$ in diameter ${\times}50\;mm$ long, was fit into a small field modulation coil of 60 mm length. At a magnetic field modulation in the range of hundreds of Hz, the change in time interval of two adjacent GMI voltage peaks was linearly related to the external magnetic field to be measured. This mechanism improved the sensor linearity of the GMI sensor to better than 0.2% in the measuring range of ${\pm}100\;{\mu}T$.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.487-495
• /
• 2023

Over the past few decades, considerable research has been conducted on field-effect transistor (FET) biosensors; however, other than electrochemical sensors for pH, they have not reached the commercialization stage and still remain at the basic research level. Although several reports have been published on experiments with real biological samples, no reports exist of developments that have reached commercialization or finalized approval for use. In this paper, we explain the reason for the experiments of FET biosensors to induce spurious signals in an experimental setup and explain the existence of misunderstandings regarding the operating principle of FET biosensors owing to the spurious signals. Based on the thoughtful review of the results of previously published papers, we show that the electrochemical read-out principle of FET biosensors requires our intensive understanding of the interfacial potential between the solution and the sensor electrode for further progress in the FET biosensor research.