• 대한기계학회논문집A
• /
• 제40권4호
• /
• pp.389-395
• /
• 2016

휠로더는 건설 현장뿐만 아니라 운반, 제조업에도 다양한 용도로 범용적으로 활용된다. 따라서 작업장치 기본 설계 시에는 작업성능뿐만 아니라 버켓의 각도변화 등 작업사양을 만족시키는 설계 안을 도출 해야 한다. 본 연구에서는 다물체 동역학 해석을 통하여 휠로더 작업장치 특성 분석 프로그램을 개발하여 작업장치 기본설계 시 활용할 수 있도록 하였다. 또한 본 프로그램과 최적설계 프로그램의 연동을 통해서 Z-bar 타입 휠로더 작업장치의 작업사양을 개선하였다. 개발된 프로그램을 활용하여 작업장치 설계 시 작업장치 컨셉에 따른 기본설계방안을 도출하는데 소요되는 시간을 절감할 수 있을 것이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1153-1156
• /
• 1998

We describe a design of a simple but efficient floatingpoint processing architecture expoiting concurrent execution of scalar instructions for high performance in general-purpose microprocessors. This architecture employs 3 stage pipeline asyncronously working with integer processing unit to regulate instruction flows between two arithmetic units.

• Advances in aircraft and spacecraft science
• /
• 제10권3호
• /
• pp.245-256
• /
• 2023

In order to improve aerodynamic performance of multi-stage axial flow turbines used in aircraft engines, a one-dimensional aerodynamic design and optimization framework is constructed. In the method, flow path is generated by solving mass continuation and energy conservation with loss computed by the Craig & Cox model; Also real gas properties has been taken into consideration. To obtain an optimal result, a multi-objective genetic algorithm is used to optimize the efficiencies and determine values of various design variables; Final design can be selected from obtained Pareto optimal solution sets. A three-stage axial turbine is used to verify the effectiveness of the developed optimization framework, and designs are checked by three-dimensional CFD simulation. Results show that the aerodynamic performance of the optimized turbine has been significantly improved at design point, with the total-to-total efficiency increased by 1.17% and the total-to-static efficiency increased by 1.48%. As for the off-design performance, the optimized one is improved at all working points except those at small mass flow.

• 수산해양교육연구
• /
• 제25권2호
• /
• pp.301-306
• /
• 2013

In this paper, cycle performance analysis of two-stage compression and two-stage expansion refrigeration system using alternative freon refrigerants is presented to offer the basic design data for the operating parameters of the system. Alternative freon refrigerant for freon refrigerant R22 were used as working fluids in this study. The operating parameters considered in this study included evaporation temperature, condensation temperature, subcooling degree, superheating degree, and mass flow rate ratio of inter-cooler. The main results were summarized as follows : The COP of two-stage compression and two-stage expansion refrigeration system increases with the increasing subcooling degree and mass flow rate ratio of inter-cooler, but decreases with the increasing evaporating temperature, condensing temperature and superheating degree. Therefore, subcooling degree, mass flow rate ratio of inter-cooler of two-stage compression and two-stage expansion refrigeration system using alternative freon refrigerants have an effect on COP of this system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.334-340
• /
• 1991

The information with regard to the working rance of lathe, cutting tool, cutting condition is managed as detabase system for turning operation. Date with regard to the working range of lathe, cutting tool, cutting condition are stroed by the DBMS(Data Base Management System) and can be added, modified, deleted and retrieved. Data stored in database system are searched to select the most proper cutting tool and cutting condition with the input data fed from the design stage. The system developed in this work is operated by the pull down menu on the IBM PC/AT personal computer, or compatible series.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.156-166
• /
• 2018

The purpose of this study is to present the suitable material that can be a real help to make the creativity development teaching method for creative inspirations of fashion design. To achieve these goals, researched and analyzed the creativity studies in the fields of psychology, education, and design (visual design, product design, fashion design, etc.) published in the national journal. Through this analysis, were extracted the characteristics of creativity, teaching methods for creativity learning, and expression methods. Based on this, intend to provide the creativity characteristic, the expression method, and the problem solving process in teaching methods for promoting fashion design ability. After the analysis, the results are as follows; First, the classical 4P (Place, Person, Process, Product) is important to a creativity development teaching method for fashion design. The elements of creativity of a creativity development teaching method for fashion design are 5elements; curiosity, openness, originality, patience, and synthetic ability. Second, the typical method is a drawing (such as a sketch) when visually express and embody ideas in fashion design. Drawing is an important activity that is working with the right brain and the left brain. Drawing exercises will reduce the burden of expressing ideas, providing pleasure and fulfillment in the development of creative ideas. Third, offered 5stages to solve problems of a creativity development teaching method for fashion design; understanding stage, idea stage, visualization stage, evaluation stage, and verification stage. Abstract intangible ideas are concreted and elaborated through stages of visual manifestation such as language, symbol, and drawing.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.228-230
• /
• 2000

The multiforming progressive die are multiple operations performed by means of a die having above two stages, jon the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (SPC, thickness :2mm) is a specific division. In order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory an practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multiforming progressive die as a U-bending working of multi-stage and performed try out. out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the par 1 of this study we treated die design mostly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.213-217
• /
• 2000

The progressive die are multiple operations performed by means of a die having above two stages, on the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (STS 304, thickness : 0.5mm) is a specific division. in order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 1 of this study we treated die design mostly.

• 한국건설관리학회논문집
• /
• 제8권4호
• /
• pp.167-175
• /
• 2007

공동주택 리모델링 프로젝트의 성능개선과정은 일반적으로 프로젝트 의뢰단계, 기획 및 조사진단 단계, 설계단계, 시공단계의 4단계의 사업절차로 구분될 수 있다. 하지만 현재 국내 리모델링 사업은 각 단계별 의사결정 업무체계와 사업수행절차가 체계화 되어있지 못하여 사업수행시 설계자 관점의 종합적 관리계획 수립의 어려움 등 여러 가지 문제점을 겪고 있다. 그 중 리모델링 설계단계는 사업시행자, 설계자, 거주자, 엔지니어 등 사업 참여 주체의 역할 및 업무절차가 타 단계에 비해 매우 복잡하고 정형화되어 있지 못하여 사업에 대한 시행착오, 사업지연, 설계부실 등을 발생시키는 주요 단계로 볼 수 있다. 특히 설계단계에서 각 사업참여자별 발생되는 정보활용 능력에 대한 부족과 부적절한 의사결정으로 인한 설계도서의 부실은 시공단계에 각종 문제를 발생시킬 뿐만 아니라 궁극적으로 거주자가 원하는 리모델링 성능향상에 대한 만족과 신뢰를 어렵게 하고 있다. 따라서 리모델링 설계단계는 매우 주요한 관리대상 단계이며, 설계관리 기술과 함께 사업수행 프로세스에 관한 종합적 이해가 필요하다. 이를 위해 본 연구에서는 리모델링 설계단계를 대상으로 참여사업주체의 역할과 책임을 규정하고, 설계 프로세스 단계별 발생정보를 중심으로 정보활용 과정을 분석하고자 하였다. 본 연구의 정보활용은 발생정보(Input)와 활용기법(Tool) 및 결과물(Output)의 과정으로 분석하였으며, 이를 통해 설계단계별 의사결정 방법을 정립하고, 설계관리 전반의 사업수행 프로세스를 구축하고자 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.371-372
• /
• 2010