• KSTLE International Journal
• /
• v.5 no.2
• /
• pp.52-56
• /
• 2004

The hard disk drive performance depends strongly on air bearing characterisitcs of the head slider. The objective of the slider design is to provide accurate positioning of the magnetic read/write element at the very small height above the disk. Application of the numerical methods is required due to complexity of the air bearing surface of the slider. The Boundary-Fitted Coordinate System Divergence Formulation method can be used for calculation of pressure distribution in the case of steep film thickness gradients. In the present work, the interpolating functions used in the expression for the Couette flow are modified in order to improve the solution characteristics in the extremely high compressibility number region. The advantages of the modified method are demonstrated on example of the flat skewed slider. Finally, the modi.ed method is applied to analysis of the static characteristics of the femto-slider. The analysis results indicate the effect of the silder's air bearing surface crown on the flying height and the pitching angle in steady state position.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.5
• /
• pp.225-228
• /
• 2005

In this work, we studied the optimized copper thickness in Cu ECP (Electrochemical Plating). In order to select an optimized Cu ECP thickness, we examined Cu ECP bulge (bump, hump or over-plating amount), Cu CMP dishing and electrical properties of via hole and line trench over dual damascene patterned wafers split into different ECP Cu thickness. In the aspect of bump and dishing, the bulge increased according as target plating thickness decreased. Dishing of edge was larger than center of wafer. Also in case of electrical property, metal line resistance distribution became broad gradually according as Cu ECP thickness decreased. In conclusion, at least $20\%$ reduced Cu ECP thickness from current baseline; $0.8\;{\mu}m$ and $1.0\;{\mu}m$ are suitable to be adopted as newly optimized Cu ECP thickness for local and intermediate layer.

• The korean journal of orthodontics
• /
• v.19 no.3
• /
• pp.147-160
• /
• 1989

Long face patients are characterized by excessive anterior facial height, lip incompetence at rest, anterior open bite, and gummy smile. A major problem is an inferior rotation of the posterior maxilla and upper molars. Long face patients have been the most difficult for orthodontist to treat successfully. In growing patients, the methods for impeding excessive vertical growth have been used high pull head gear, functional appliance, and combined type of two. One significant improvement comes from using a full arch splint to deliver force to the maxilla more vertically. In adult patients, orthodontic camouflage treatment is biomechanically difficult and doesn't work when the problem is primarilly vertical. Surgical maxillary impaction provides a means for successfully treating most of problems. Also, superior reposition of the chin via a mandibular inferior border osteotomy is effective in decrease of lower anterior facial height and correction of the poor chin-lip balance. Post-surgical stability and the physiologic response are good. The coordinated orthodontic and surgical treatment is necessary for solution the difficult skeletal deformity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.93-94
• /
• 2005

Cu metallization using electrochemical plating(ECP) has played an important role in back end of line(BEOL) interconnect formation. In this work, we studied the optimized copper thickness using Bottom-up Gap-fill in Cu ECP, which is closely related with the pattern dependencies in Cu ECP and Cu dual damascene process at 0.13 ${\mu}m$ technology node. In order to select an optimized Cu ECP thickness, we examined Cu ECP bulge, Cu CMP dishing and electrical properties of via hole and line trench over dual damascene patterned wafers split into different ECP Cu thickness.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.57-62
• /
• 2011

In this study, a experimental work to investigate the influence of a turbulent wake flow on the velocity distribution of a diffuser with PIV method. The turbulent wake is generated by a rectangular prism, which is installed at the inlet of a diffuser. The results show that the velocity recovery of the subsonic diffuser is dependent on the height and location of rectangular prism. It is found that a certain height of the rectangular prism to generate the turbulent wake give a better velocity recovery, compared with no rectangular prism.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.671-681
• /
• 2011

Objective: The purpose of this study is to compare the workload level at each lower limbs posture and suggest the ergonomic workstation guideline for working period by evaluating the imbalanced lower limbs postures from the physiological and psychophysical points of view. Background: Many workers like welders are working in various imbalanced lower limbs postures either due to the narrow working conditions or other environmental conditions. Method: Ten male subjects participated in this experiment. Subjects were asked to maintain 3 different lower limbs postures(standing, squatting and bending) with 3 different working conditions(balanced floor with no scaffold, imbalanced floor with 10cm height of scaffold, and imbalanced floor with 20cm height of scaffold). EMG data for the 4 muscle groups(Retus Femoris, Vastus Lateralis, Tibialis Anterior, Gastrocnemius) from each lower limbs posture were collected for 20 seconds every 2 minutes during the 8 minutes sustaining task. Subjects were also asked to report their discomfort ratings of body parts such as waist, upper legs, lower legs, and ankle. Results: The ANOVA results showed that the EMG root mean square(RMS) values and the discomfort ratings(CR-10 Rating Scale) were significantly affected by lower limbs postures and working time(p<0.05). The correlation was analyzed between the EMG data and the discomfort ratings. Also, prediction models for the discomfort rating for each posture were developed using physical condition, working time, and scaffold height. Conclusion: We strongly recommend that one should not work more than 6 minutes in a standing or squatting postures and should not work more than 4 minutes in a bending posture. Application: The results of this study could be used to design and assess working environments and methods. Furthermore, these results could be used to suggest ergonomic guidelines for the lower limbs postures such as squatting and bending in the working fields in order to prevent fatigue and pain in the lower limbs body.

• The Journal of Korean Physical Therapy
• /
• v.14 no.2
• /
• pp.172-180
• /
• 2002

The purpose of this paper was to make an analysis of anaerobic power in professional female basketball players using the Wingate Test Method with bicycle ergometer. Twenty-three subjects(age $21.6\pm2.8years$, body height $178.0\pm7.4cm$, body weight $70.3\pm7.4kg$) were selected from professional female basketball team whose careers were over 10years and participated in this investigation. Each subject peformed a Wingate anaerobic power test to determine total work, peak power, mean power, fatigue index and blood lactate concentration. The following were obtained from result data analysis; 1. The Total Work of athletes was a $1128.7\pm120.6watt$ 2. The Peak Power of athletes was a $449.5\pm53.1watt$ 3. The Mean Power of athletes was a $369.1\pm39.4watt$ 4. The Fatigue Index of athletes was a $33.5\pm6.9\%$ 5. The blood lactate concentration was $1.85\pm0.85mM/L$ at the normal state and $3.16\pm1.53mM/L$ at the after Wingate test. The blood lactate concentration was $6.96\pm0.81mM/L$ after 3 minute and $6.95\pm1.05mM/L$ after 5 minutes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.409-417
• /
• 2003

We have studied electrical properties and luminous efficiency of organic light-emitting diodes(OLEDs) with different buffer layer and cathodes in a temperature range of 10 K and 300 K. Four different device structures were made. The OLEDs are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinato) aluminum(III) (Alq$_3$) as an electron transport and omissive layer, and poly(3,4-ethylenedioxythiophene) :poly (styrenesulfonate) (PEDOT:PSS ) as a buffer layer. And LiAl was used as a cathode. Among the devices, the ITO/PEDOT:PSS/TPD/Alq$_3$/LiAl structure has a low energy-barrier height for charge injection and show a good luminous efficiency. We have got a highly efficient and low-voltage operating device using the conductive PEDOT:PSS and low work-function LiAl. From current-voltage characteristics with temperature variation, conduction mechanisms are explained SCLC (space charge limited current) and tunneling one. We have also studied energy barrier height and luminous efficiency at various temperature.

• Journal of Environmental Science International
• /
• v.32 no.3
• /
• pp.161-171
• /
• 2023

The present study evaluated growth factors affecting oak community plantations through literature review and a field survey. Specifically, 41 related literature sources were analyzed and field surveys were conducted to collect growth data. Previous studies were analyzed to identify variables with high frequency of use. The frequency of use was in the order of tree size > environment > planting density > forest age. Analysis of factors impacting height and diameter growth revealed that the growth rate of species other than Quercus variabilis was negative in the field survey. This may be because of differences between the actual trees planted and specifications in the construction drawings, which may be attributed to the site conditions and decisions made by the project subject during construction. Furthermore, simple linear regression analysis was conducted with time, height at planting, density, and species code as the independent variables and growth rate as the dependent variable. A strong positive linear correlation was noted between height and diameter. This work builds a foundation for developing a forest restoration model and simulation program based on a regression model derived from the four variables tested.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1519-1519
• /
• 2001

The aim of this work was to test the feasibility of NIRS in analysing textural characteristics of “Pasta Filata” cheese during the shelf-life. For this purpose, 128 samples of “Pasta Filata” cheese, subdivided into two sets on the basis of the wax used to avoid mechanical damages (paraffin, biodegradable wax), were analysed by using an InfraAlyzer 500 (Bran+Luebbe). Analyses were performed at room temperature. Samples were cut into small cylinders (D=3.2 cm, height = 1 cm), in agreement with literature information. Data were processed by using Sesame Software (Bran+Luebbe). Samples were analysed, during the shelf-life, at 90 and 120 days. In parallel, textural characteristics were detected carrying out a compression method by using an Universal Testing Machine Instron model 4301 (Instron Corporation, Canton, Massachusetts). As compression probe was used a cylinder (D = 5.8 cm, height = 3.7 cm) and a speed rate of 20mm/min was applied. The load at 20 mm of compression was recorded on sample cylinders of 1.7 cm (D) by 2 cm (height). Qualitative analysis of full spectra showed the possibility to gather samples on the basis of the days of shelf-life. The textural characteristics of cheese during the shelf-life was evaluated by comparing NIRS data with rheological results. The best correlation was obtained applying MLR to the first derivative of normalized absorbance values at seven wavelengths. Load values were plotted against the NIR prediction values based on first derivatives. NIRS proved to be an useful tool in classifying samples on the basis of the shelf-life period as well as in predicting their textural characteristics ($R^2$= 0.916, SEC = 0.192, SEP = 0.248, SEV = 0.345).