• Ocean Systems Engineering
• /
• v.12 no.4
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.814-819
• /
• 1986

In this work the electrical conduction and breakdown properties of thermal oxides grown on phosphorus-doped polysilicon have been investigated by using ramped I-V measurements. The oxide films, grown from phosphorus-doped polysilicon deposited at 560\ulcorner, have higher breakdown field(6.8MV/cm) and lower leakage current than those deposited at 625\ulcorner. Also the effective energy barrier height(\ulcorner)calculated from the Fowler-Nordheim curve of polyoxide was 0.76eV for 560\ulcorner deposited film and 0.64eV for 625\ulcorner deposited film.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.223-228
• /
• 2011

This research was performed to investigate change of green speed according to growth of grass, for this, the method of effective green management for improvement of green speed was searched by investigating green density, soil moisture, surface hardness, and mowing height every day for 6 months. As the result of the study, reliability between, green density, soil moisture, surface hardness, mowing height and green speed were measured to be respectively 0.4742, 0.5690, 0.4632, 0.2806, i.e. soil moisture is considered as the factor which affects green speed the most. Therefore, it will be an advantageous environment to maintain soil moisture a little bit low to improve green speed within the range that does not disrupt the growth of green. In case of green density, it is considered to be effective to get a fast green speed when obtaining enough density during May~June, the most vigorous growth period and at the same time green up period. Surface hardness was confirmed that management work as rolling is a considerably effective method to increase hardness. However, rolling gives high stress to the green, combining another management work as regular hilling could be a good alternative. Reliability of green preview and green speed was 0.2806, lower than soil moisture or surface hardness. Through the results, it was confirmed that management of mowing height to be low less than 3.00 mm is helpful to improve green speed, timely, and it is advantageous to manage green speed when adjusting mowing height during the vigorous growth period of bent grass. However, considering the range of mowing height was not various, being 2.9~3.4 mm, henceforth research on investigation of green speed at more various mowing heights would be necessary. Consequently, except mowing height, other three factors, i.e. green density, soil moisture and surface hardness were investigated to have considerable level of reliability on green speed, and it is considered that each factor affects green speed respectively according to green condition and time. Accordingly, in order for the manager to maintain high speed all year round, intensive care for each factor per time unit considering green growth condition is considered to be necessary.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.43-54
• /
• 1986

Back-pyun is a kind of rice cake made by steaming rice flour added sugar, water and salt and garnished with shredded chestnuts, dates, mushrooms and pinenuts. The Back-pyun has been widely used in Korean celebrations. This study aimed to compare and determine the effects on sensory characteristics and texture of Back-pyun 1) when the proportion of glutinous rice, added i.1 making Back-pyun, is 0%, 5%, 10%, 15%, 20%, 25% and 30% 2) then it reheated after storage for 0,24, 48 and 72 hours. Evaluation was conducted through sensory evaluation and objective evaluation. The results are as follows : 1. In sensory evaluation, color of Back-pyun turned yellow as the addition level of glutinous rice increased and then by reheating after storage for 24, 48 and 73 hours. Coarseness was not significantly different as the addition level of glutinous rice increased before storage. But Back-pyun reheated after storage for 24,48 and 72 hours were significantly different by the addition level of glutinous rice. Softness, dryness and crumblyness tended to decrease as the addition level of glutinous rice increased and by reheating after storage for 24, 48 and 72 hours. The most favorite tendency on the appearance was at the addition level of glutinous rice of 5%. Texture and overall preference were better at the addition level from 10% to 20% than any other levels. 2. Rheometer measurement indicated that compression force, gumminess ana chewiness tended to increase as the addition level of glutinous rice increased and decrease by the storage conditions. But work ratio and recovered height did not have much effect the addition level of glutinous rice and the storage conditions. Compression force of Back-pyun (not reheated) tended to increase by the storage time and the addition level of glutious rice. Especially it showed remakably increasing tendency during 24 hours storage (at $4^{\circ}C$) 3. Moisture content tended to increase by the addition level of glutinous rice and decrease by the storage time. But moisture content of Back-pyun reheated after storage for 24 hours stowed the increasing tendency. 4. Softness of Back-pyun had significant relationship with compression force and work ratio. Dryness and crumblyness had significant relationship with work ratio. Therefore compression force and work ratio represented the texture of Back-pyun.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.427-432
• /
• 2020

In order to establish an effective forest management plan, it is necessary to investigate tree management information such as tree height and DBH(Diameter at breast height). However, research on convergence and application of data acquisition technology to improve the efficiency of existing forest survey methods is insufficient. Therefore, in this study, tree management information was constructed and analyzed using point cloud data acquired through a 3D scanner. Data on the study site was acquired using fixed and mobile 3D scanners, and the efficiency of the mobile 3D scanner was presented through comparison of working hours. In addition, tree management information for object management was constructed by classifying vegetation by object using point cloud data, and by constructing information on chest height diameter and height. As a result of the accuracy evaluation compared with the conventional measurement method, the difference in tree height was 0.02-0.09m and DBH was 0.01-0.04m. If information on the location of vegetation and crowns of each object is constructed through additional research in the future, the efficiency of the work related to forest management information construction can be greatly increased.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.3
• /
• pp.19-31
• /
• 2017

Plants are the basis for sustainable green growth, and the value of existence and importance of trees including landscape Plants can't be emphasized enough. Therefore, they are precious living things thriving in all sorts of public services, and continuous civil complaints for justifiable compensation of landscape Plants are filed. First, the standard formula of planting intervals according to production target specifications is calculated using root-collar caliper and diameter at breast height, and apply (1) standard medium sized trees which have not yet reached commercialization [deciduous tree production goal (R(B) less than 6cm]= (target standard)= [target standard $R(cm){\times}15{\times}0.7$]. (2) In case of commercialization(R6~R10)= [target standard $R(cm){\times}15{\pm}5%$], (3) In case of more than R12= [target standard $R(cm){\times}15{\times}130%$] shall be applied. In case of using diameter at breast height (4) In case of commercialization(B6~B10)= [target standard $B(cm){\times}20{\times}15{\pm}5%$], (5) In case of more than B12= [target standard $B(cm){\times}20{\times}130%$] shall be applied. Second, appraisal methods based on tree classification of compensation for loss are classified according to planted locations. (1) landscape trees within a house=[price of arrival at the site+planting cost], (2) landscape trees in places such as arboretum=[management technology of tress + relocation expenses considering scarcity of the trees (3) landscape trees in a place of loads= [landscape tree production cost + work out added price. In case of producted landscape threes (4) landscape trees ready to be commercialized as sales loss.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.35-44
• /
• 2007

Work-related musculoskeletal disorders (WMSDs) are a major problem in industries in which manual materials handling is performed by workers. To prevent these WMSDs, it is necessary to understand the muscular strength capability and use this knowledge to design job and selection and assignment of workers. Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. However, a few researches have been done for one-hand lifting activity of manual materials handling tasks. The objective of this study is to compare one-hand and two-hands lifting strength in terms of static and dynamic strength of the lifting activity for the ranging from the height of knuckle to elbow. It is shown in this study that the isometric lifting strength of one-hand is ranging from 54.7 to 63.3% of the one of two-hands. However, it is found that there is no significant difference between a person's isometric lifting strength for left-hand and right-hand. It is also shown that there is no significant difference between the peak force under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Similar results were obtained for the peak acceleration and peak velocity under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Isometric lifting strength at the height of knuckle was ranging from 2 to 3 times of the dynamic peak force during sub-maximal lifting. It is concluded that the dynamic peak forces under the sub-maximal loading are not highly correlated with the isometric lifting strength in similar postures.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.382-385
• /
• 2007

Constantly enhancing positioning accuracy by the Global Positioning System (GPS) technique is of great importance, but challenging, especially after the GPS positioning technique has been improved considerably during the past two decades. The associated main error sources have been reduced substantially, if not eliminated. Troposhpeic influence with its highly temporal and spatial variability appears to be one of the major error sources. It is hence an increased interest among GPS researchers to reduce the tropospheric influence or delay. Two techniques have been commonly implemented to correct the tropospheric impact. The first technique, known as parameter estimation, characterizes the path delay with empirical models and the parameters of interest are determined from the GPS measurements. The second strategy, termed as external correction, involves independent path delay measurements. The present study is an integration of both techniques in which the parameter estimation as well as external correction are used to correct the path delay for $110{\sim}210$ km range baselines. Twenty-four parameters have been obtained in 24 hours solution by setting the cutoff angle at 3 and 15 degrees for parameter estimation strategy. Measurements from meteorological instruments and water vapor radiometer (WVR) are applied in the GPS data processing, separately, as an external strategy of present research work. Interesting results have been found, indicating more stable repeatability in baseline when the external correction strategy is applied especially with the inclusion of WVR observations. The offset of an order of 1 cm is found in the baselines determined by the two strategies. On the other hand, parameter estimation exhibits more stable in terms of GPS height repeatability. The offset in the GPS height determined by the two strategies is on the order of few centimeters.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1176-1179
• /
• 2009

Currently the time when we are living the large majority is harmonizing with digital medium together. From the calligraphy which is traditional in the example is reconstituted with digital and with the element which is one design is being born again. This about one being time is not a fun in rediscovery and as the design where the traditional form which seems hardly is modern is mixed in digital medium and is going. In this paper when digitalizing the expressive technique of calligraphy from the work which is analog time knows the important element of the actual conditions which appear and the report person does. The ink which appears from joke from actual work or calligraphy technique analyzes the actual condition spreading and this digitalization at the time of height boil time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.234-238
• /
• 2008

The energy conservation theory is introduced for investigating processes of runoff and soil erosion on the hillslope system changed vegetation condition by wildfire The rainfall energy, input energy consisted of kinetic and potential energy, is influenced by vegetation coverage and height. Output energy at the outlet of hillslope is decided as the kinetic energy of runoff and erosion soil, and mechanical work according to moving water and soil is influenced dominantly by the work rather than the kinetic energy. Relationship between output and input energy is possible to calculate the energy loss in the runoff and erosion process. The absolute value of the energy loss is controlled by the input energy size of rainfall because energy losses of runoff increase as many rainfall pass through the hillslope system. The energy coefficient which is dimensionless is defined as the ratio of input energy of rainfall to output energy of runoff water and erosion soil such as runoff coefficient. The energy coefficient and runoff coefficient showed the highest correlation coefficient with the vegetation coverage. Maximum energy coefficient is about 0.5 in the hillslope system. The energy theory for output energy of runoff and soil erosion is presented by the energy coefficient theory associated with vegetation factor. Also runoff and erosion soil resulting output energy have the relation of power function and the rates of these increase with rainfall.