• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.504-510
• /
• 2002

건축공사 규모의 대형화 복잡화, 다양화가 되면서 다수의 현장에서 공사수행에 따른 많은 공사정보가 현장에서 발생하여 본사로 보고되고 있다. 이러한 많은 정보들 중에서 개별현장 및 다수의 현장을 동시에 관리하기 위해 중요한 핵심정보만을 추출하여 경영진이 현장을 지원하기 위한 적절한 의사결정을 내린 수 있도록 하기 위한 필요성이 증가하고 있다. 또한 건설산업의 정보화가 추진됨에 따라 현장에서 발생한 정보를 효율적으로 취합하여 의사결정을 내리고 공사관리를 행하는 것이 기업의 경쟁력을 확보하는 요소로써 그 중요성이 증가하고 있다. 따라서 중소건설업체에서 다수의 현장을 동시에 관리하기 위해 본사차원에서 요구되는 기본적인 정보요소와 핵심적인 정보요소를 규정하고 그에 대한 활용방안을 제안하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.847-864
• /
• 1995

In this paper we present an integrated methodology for strategic planning in telecommunications standardization. Especially this paper focuses on the method of setting priorities for telecommunications SWAs(Standardization Work Areas) and related SWls(Standardization Work Items). To make a strategic plan for telecommunications standardization in which usually includes prioritization, resource allocation, standardization schedule for each SWA is based on prioritization of SWAs. Our methodology integrated various existing methods including the Analytic Hierarchy Process(AHP) and a modified Delphi technique. Recently, rapid technology evolution in telecommunications fields increases the necessity of developing more and more new standards. Also increased complexity of those technologies makes standards more complicated, more specified and more thick than the past ones. As a result, the number of SWAs and SWIs are being increased constantly. Furthermore, rapid telecommunication environment changes such as deregulation, liberalization, privatization, regionalization, and globalization surrounding standardization bring about new challenges and opportunities. Due to all these trends, strategic planning for telecommunications standardization grows more and more important. To cope with these challenges and also to make the more efficient use of the limited standardization resources including time, financial, human resources, we suggest more logical and rational approach that will be a backbone of strategic plan for telecommunications standardization. The telecommunications standardization planning process involves a MCDM(Multi-Criteria Decision Making) process. The Analytic Hierarchy Process(AHP) is a kind of MCDM approaches. Our method is based on a combination of a modified Delphi technique and an application of AHP(Liberator's spreadsheet model). Analyzed data from Delphi technique is used as inputs to ABP. In addition, we also focus on the technique how to combine group judgments and to handle a large number of comparisons. We present analyzed results including Pilot and Full Scale Survey according to the proposed process. The result of this study will be useful input for telecommunications standardization policy making and practical implementation.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.701-707
• /
• 2016

본 연구는 지루성 두피염 발생빈도가 높은 것으로 알려진 30~50대 남성 150명을 대상으로 생활 습관과 샴푸 습관이 지루성 두피에 어떠한 영향을 미치는지 알아보고자 하였다. 그 결과 지루성 두피의 주요 원인과 관련이 있다고 알려진 두피 가려움증과 과다 유분, 두피 뾰루지, 두피 붉은 증상에 대하여 샴푸 시기와 잦은 피로감은 모든 증상에서 통계적으로 유의한 영향을 미치는 것으로 조사되었으며(p<0.01), 샴푸 시기, 잦은 피로감, 규칙적인 출 퇴근, 스트레스 민감, 헤어스타일 제품사용 유 무와 같은 생활과 샴푸 습관은 지루성 두피에 영향을 미치는 것으로 확인되었다. 연구 결과를 통해 사무직 군무 종사자들의 생활과 샴푸 습관이 지루성 두피의 발생원인과 통계적으로 유의한 것으로 확인 되었으며, 특히 샴푸 습관과 샴푸의 불완전한 세정 및 모발 건조에 의한 습진이 지루성 두피 발생의 일차적인 원인이 되고, 불규칙적인 출 퇴근과 잦은 피로감, 만성 스트레스가 지루성 두피의 이차적 악화 원인이 되고 있음을 알 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.735-737
• /
• 2015

본 논문은 SaaS(Software as a Service) 기반의 건설공정전송 및 안전관리 시스템을 건설작업에 활용하여 공정관리와 안전관리에 적용함으로써 초고속 무선인터넷을 통해 이루어지는 다양한 유형의 건설 공정에 대한 일정 및 결과와 안전관리에 대한 체계적인 수단을 확보할 수 있고 공정 내에서 이루어지는 모든 관리 체계를 신속하고 정확하게 관리할 수 있다.작업자는 스마트폰을 활용하여 감독관으로 작업을 지시받고 작업의 현황과 결과를 보고한다. 또한 비상상황 시 감독관에게 보고를 즉시 할수 있으며 일정시간 이상 스마트 폰 진동 발생이 없는 경우 작업자에게 위험 상황을 체크하게 된다. 감독관의 경우 수립된 공정별 업무를 지시하고 결과를 확인하며 현장 작업자 위험 상황의 조치명령을 내리고 미흡한 부분을 제시함으로써 만족되는 결과를 얻게 된다. 또한 소프트웨어(서버)의 경우 작업에 관련된 모든 자료를 저장하고 회원관리 및 보안을 담당하였다.

• 한국항행학회논문지
• /
• 제19권1호
• /
• pp.33-40
• /
• 2015

A-SMGCS는 모든 기상조건에서 공항 이동지역 내 요구되는 안전수준을 확보하는 동시에 정해진 지상이동률을 유지하기 위하여 항공기와 차량에게 경로, 안내, 감시, 통제기능을 제공하는 시스템이다. 본 연구에서는 A-SMGCS 적합성 검증방안을 개발하기 위해 시스템 엔지니어링을 도입하였다. A-SMGCS 운용개념을 통해 레벨 IV급 A-SMGCS에 대한 요구사항을 정의하였으며, 기능분석과 할당을 통해 시스템 아키텍처와 시스템 규격을 도출하였다. A-SMGCS 개발을 위한 WBS와 IMS를 수립하였으며, 마지막으로 시스템에 대한 확인 및 검증을 위한 CCL과 TEMP를 개발하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권12호
• /
• pp.637-644
• /
• 2004

This paper proposes an expert system with the knowledge learning capability which can enhance the safety and effectiveness of substation operation in the automated substation as well as existing substation by inferring multiple events such as main transformer fault, busbar fault and main transformer work schedule under multiple inference mode and multiple objective mode and by considering totally the switch status and the main transformer operating constraints. Especially inference mode includes the local minimum tree search method and pattern recognition method to enhance the performance of real-time bus reconfiguration strategy. The inference engine of the expert system consists of intuitive inferencing part and logical inferencing part. The intuitive inferencing part offers the control strategy corresponding to the event which is most similar to the real event by searching based on a minimum distance classification method of pattern recognition methods. On the other hand, logical inferencing part makes real-time control strategy using real-time mode(best-first search method) when the intuitive inferencing is failed. Also, it builds up a knowledge base or appends a new knowledge to the knowledge base using pattern learning function. The expert system has main transformer fault, main transformer maintenance work and bus fault processing function. It is implemented as computer language, Visual C++ which has a dynamic programming function for implementing of inference engine and a MFC function for implementing of MMI. Finally, it's accuracy and effectiveness is proved by several event simulation works for a typical substation.

• 한국식생활문화학회지
• /
• 제9권2호
• /
• pp.159-170
• /
• 1994

Central commissary school foodservice operations' practices and their dietitians' job duties were assessed and compared with those of their counterpart of conventional school foodservice operations to find out strategies for early settlement and better management for commissary system. Survey qestionnaires consisted of general background, employees' work schedule and dietitians' job duties. 12 commissary schools(out of 22 existing in Korea) and 77 conventional schools from Kyungkido were participated in the survey. The results of this study can be summarized as follows: 1. Central commissary school foodservice was presently utilized at 5 schools from islands type, 11 schools from rural type, and 6 schools from urban type, consisting total of 22 commissary schools, and 52 satellite schools. 2. Dietitians were evenly employed with their experiences, 55.5% were those with less than 2 years of experience, 44.6% were those with more than 2 years of experience. 3. Commissary schools employed more full-time empolyees$(1.8{\pm}0.7)$ than conventional schools$(0.3{\pm}0.5)$, however as far as the production capacity was concerned, only the part-time employees played significant roles(p<.01). Regardless of the number of students, an absolute number of full-time employees were employed, and their duties were not carried out efficiently. The part-time employees of commissary schools performed more loaded work compared to their counterparts in conventional schools. 4. Out of the dietitians' foodservice duties, 'basic food service production$(3.9{\pm}0.7)$' were carried out adequately, whereas 'nutrition education and advertisement$(2.5{\pm}0.6)$' and 'administrative affairs and information related duties$(2.8{\pm}0.9)$' were not. In order to enhance their working capacity, systematic organizational reforms are imminent. 5. Survey results also showed that dietitians performed less duties at satellite school than at the central commissary. This indicates more systematic foodservice management practices are urgently needed.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.416-421
• /
• 2001

국내 철근 콘크리트 공사는 철근현장가공조립을 주로 하고있는데 철근공사는 거푸집공사와 더불어 건축물의 구조적 안정성과 내구성 및 공기에 가장 큰 영향을 미치고 있는 공사이다. 이와 같은 철근현장가공조립의 프로세스를 린 생산원리를 적용하여 가치흐름분석을 하였다. 가치흐름분석은 가치분석과 가치흐름맵핑을 통해서 건설프로세스 상의 가치창출작업과 비 가치창출작업을 분석하였다 그 결과 비 가치창출 작업으로 인한 낭비로 많은 작업 단계와 인력, 장비, 자재, 시간 등이 낭비되고 있었다. 또한 밀어내기 생산(Push-driven Production)으로 과잉생산을 하는 등 생산의 낙후성이 조사되었다. 이러한 프로세스상의 문제점을 개선하기 위해 이 연구에서는 부가가치를 창출하는 가치창출 작업을 최대화하고, 비 가치창출작업을 최소화하여 낭비요소를 제거하는데 목적이 있다. 특히 진행간 재고를 최소화하여 흐름생산(Flow Production)과 당김생산(Pull-driven Production)이 될 수 있도록 하였다.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.143-150
• /
• 2020

To enhance the effectiveness of the FMS (flexible manufacturing system), it is necessary for the manufacturing control system to be upgraded by integrating the cyber and the physical manufacturing systems. Using the CPPS (Cyber-Physical Production System) concept, this study proposes a 4-stage vertical integration and control framework for an aircraft parts manufacturing plant. In the proposed framework, the process controller prepares the operations schedule for processing work orders generated from the APS (advanced planning & scheduling) system. The scheduled operations and the related control commands are assigned to equipments by the dispatcher of the line controller. The line monitor is responsible for monitoring the overall status of the FMS including work orders and equipments. Finally the process monitor uses the simulation model to check the performance of the production plan using real time plant status data. The W-FMCS (Wing rib-Flexible Manufacturing Control & Simulation) are developed to implement the proposed 4-stage CPPS based FMS control architecture. The effectiveness of the proposed control architecture is examined by the real plant's operational data such as utilization and throughput. The performance improvement examined shows the usefulness of the framework in managing the smart factory's operation by providing a practical approach to integrate cyber and physical production systems.