• PNF and Movement
• /
• 제17권2호
• /
• pp.253-261
• /
• 2019

Purpose: The purpose of this study was to identify the causal relationship between workplace stress and working posture and the development of work-related neck pain in office workers. Methods: The study participants included 62 office workers who had not experienced neck pain in the previous 12 months. A battery of measures to evaluate potential workplace risk factors in an office setting were conducted at baseline, and the 12-month incidence of work-related neck pain was reported via monthly questionnaires. Survival analysis was used to evaluate the longitudinal relationship between the workplace risk factors and the development of work-related neck pain. Results: The incidence of work-related neck pain was 1.91 (95% CI: 1.06-3.45) per 100 person months. The incidence of neck pain was predicted to be less likely to happen when workers had a more upright thorax posture during computer work (hazard ratio, 0.94; 95% CI: 0.89-0.99). However, stress may deteriorate the preventative effects of other risk factors on neck pain and showed a positive relationship with episodes of neck pain (hazard ratio, 1.37; 95% CI: 1.03-1.84). Conclusion: Understanding the psychophysiological effects of neck pain may explain the development of neck pain in office workers. Our interest in prevention plans and treatments should therefore involve a multifactorial pathology of neck pain in the workplace.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.119-125
• /
• 2008

Musculoskeletal disorders(MSDs) are one of the major issues in shipbuilding industry. Main risk factors of MSDs include manual handling of heavy weight, awkward posture, repetitive tasks, prolonged static muscle contraction, and so on. in this study, Using the three-dimensional digital human modeling and simulation method we made up a worker and work posture on a virtual environment. To verify this simulation we compared both traditional ergonomic analysis on a real worker and digital program analysis on a digital human. And this paper shows that it is possible to reduce the rate of MSDs in the shipbuilding industry because it means we can change poor posture mid surroundings into better ones.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.123-124
• /
• 2019

In the labor-intensive construction site, potential threats of the musculoskeletal diseases mainly caused by various repetitive physical tasks, vulnerable environment, and the aging of the labor worker exist. However, quantitative measuring method of construction labor worker's work posture has not been improved yet. This study proposed musculoskeletal measuring method by using wearable motion recognition sensor for quantitative evaluation and analysis of working posture of construction workers. This method is expected to be used as a basic data for posture analysis and prevention construction safety accidents, as well as physical workload and labor productivity analysis by labor work type.

• 대한인간공학회지
• /
• 제25권3호
• /
• pp.61-66
• /
• 2006

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.133-141
• /
• 2015

This study tried to identify the problems associated with the posture to be analyzed and tried to suggest guidelines for MSDs(Musculoskeletal Disorders) evaluation based on working posture. A total of 50 jobs from 3 different types of industries(electronics, hospitals, automobiles) were used for MSDs evaluation study which was done by 6 observers. Two indexes were applied to identify the problem in this study which were percentage of agreement and counter-time-error rate. Specifically, 'counter-time-error rate' represented a degree of consistency in terms of selecting the posture to be analyzed time after time. Main results of the study were as follows; 1) The average percentage of agreement for representative posture for whole body was relatively higher than that for representative postures for individual body parts, 2) The counter-time-error rate(%) has been reduced as the evaluation process has repeated for the same job. 3) The counter-time-error rate(%) for electronics, hospitals, and automobiles were 63.4%, 61.2%, and 67.3% respectively. 4) The counter-time-error rate(%) for the job with the work cycle of 0.5 to 2 minutes were lower than that of the jobs with the work cycles less than 0.5 minute or greater than 2 minute. 5) The work cycles and the number of trials had significant effects on counter-time-error rate while the types of industries did not have significant effects on counter-time-error rate. Some guidelines could be prepared from the results of the study. Probably, there should have an extension in terms of form and matter for this study in order to have more practical output.

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.131-138
• /
• 2008

This research is on a seating posture happening at a chair in a cinema and looked into various changes in a posture through the analysis of bodily movement in a established space like a cinema. Through the behavioral analysis of a seating posture in a limited space, each behavioral characteristic shown by a male and female and interdependent relations with a limited space were grasped. The conclusion through the above research work was as follows: 1) This research suggested a frame of analysis by dividing a seating posture into the side and upper part and was able to analyze its subsequent change characteristic of a seating posture by a male and female. 2) As for the side posture, a male was found to change fewer postures than a female, but as for the upper posture, there appeared a high frequency in posture change in case of a female. 3) As for time of staying in the side posture, a female was found to keep up a specific posture, and relatively a male changes his postures frequently while appreciating a movie; likely, as for the upper posture, it was found out that there existed a difference between the preference for the upper posture and time to keep it up. 4) A male and female were establishing a comfortable environment through their change in a posture, and there appeared changes in a posture the most within every 10 minutes in both the side and upper part postures. 5) As for the correlation between a initial posture and keep-up posture, it was found that a male tend to pursue a comfortable posture as time goes by, while a female kept up a comfortable one from her initial seating posture.

• 한국융합학회논문지
• /
• 제9권11호
• /
• pp.117-126
• /
• 2018

본 연구는 치과위생사의 치석제거 시 작업자세와 근골격계질환 자각증상의 관련성을 알아보기 위함이다. 치과위생사 264명을 대상으로 일반적 특성, 건강행태, 치석제거 업무, 작업자세, 근골격계 자각증상의 설문을 구성으로 융합연구 하였다. 자료 분석은 R 2. 15. 1 프로그램을 이용하였으며 분석한 결과, 치석제거 시 올바른 작업자세는 29.9%, 대체적으로 올바른 작업 자세는 37.5%, 올바르지 않은 작업 자세는 32.6%로 나타났으며, 근골격계의 자각증상을 호소하는 부위로는 어깨가 3.32배(OR,3.32;95%CI, 1.58~6.98), 발은 2.97배(OR,2.97;95%CI, 1.18~7.48), 손은 2.84배(OR,2.84;95%CI, 1.35~5.98), 목은 2.82배(OR,2.82;95%CI, 1.35~5.91), 등은 2.41배(OR,2.41;95%CI, 1.02~5.68)로 유의성 있게 높은 결과를 보였다. 이는 올바른 작업자세의 중요성을 제공함으로서 작업환경 개선 및 효율적인 예방프로그램 개발과 지속적인 교육계획을 수립하는데 기여할 것이며, 추후 사회 심리적 요인을 포함한 조사 연구가 필요하겠다.

• 산업공학
• /
• 제17권2호
• /
• pp.218-225
• /
• 2004

This study aims to investigate effect of external load and motion repetitiveness on perceived discomfort. An experiment was performed for measuring discomfort scores at varying conditions, in which external load, motion repetitiveness and arm posture were employed as experimental variables. The arm posture was controlled by shoulder flexion and abduction, and by elbow flexion. Fifteen healthy college-age students without history of musculoskeletal disorders voluntarily participated in the experiment. The results showed that the effect of external load, motion repetitiveness and shoulder posture on discomfort were statistically significant, but that elbow posture did not significantly affect discomfort ratings. The effect of external load was much larger than that of any other variables, and that of repetitiveness was second only to external load. Discomfort scores significantly increased linearly as the levels of external load and motion repetitiveness increased. This implies that although they were not fully reflected in the existing posture classification scheme such as OWAS, RULA, etc., the effect of external load and motion repetitiveness should be taken into consideration for precisely quantifying work load in industry. Based on regression analysis, equivalent values of external load and motion repetitiveness in terms of discomfort scores were provided, which would be useful for better understanding the degree of their effect on work load.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.83-89
• /
• 2009

This study was conducted to assess exposure to musculoskeletal disorders risk factors in the cooking & housekeeping jobs in hotel work. PATH (posture, activity, tools and handling) method was used for data collection at the 6 hotel settings in different regions across Korea. From 26 workers, a total of 949 PATH observations were obtained. The highest percent time on non-neutral posture was 78% for pinch grip, followed by 74%(wrist deviation), 52%(trunk posture), 37%(shoulder/arm posture), and 30%(neck posture). The highest percent time in the three HAL variables was 47% for HAL-cat2. The percent time of items in relation to both loads with more than 5kg and contact stress was less than 2%. The hotel workers were not exposed to vibration.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.83-90
• /
• 2016

Purpose : Recommended posture according to the location of operating teeth have been standardized in dental clinic to prevent musculoskeletal disorder. However, clinicians do not comply with this rule in many cases. This study investigated the effects of operating posture on cranio-cervical range of motion (CROM) and muscles activity of neck and upper extremity. Methods : Sixteen healthy dental hygiene students were participated. During operating posture (3 recommended and 3 experimental postures which were set front, side, back, respectively), CROM in the fronal and sagittal plane were measured by Cervical Range of Motion Instrument and muscle activities of Sternocleidomastoid, upper trapezius, middle deltoid, extensor carpi radialis, brachioradialis, and abductor pollicis brevis were measured by Pocket EMG system. Result : CROM were significantly decreased in recommended posture in comparison with experimental posture (p<.05). In addition, muscle activity of middle deltoid was significantly decreased in recommended front posture. Moreover, brachioradialis and extensor carpi radialis showed the same result in recommended back posture (p<.05). Conclusion : Recommended posture is close to neutral posture and to reduce muscle fatigue and overuse, which may considered as a preventing musculoskeletal disorder and partially explain its efficacy in dental clinic.