• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.53-59
• /
• 2008

In this paper, a novel dual-band high-efficiency class-F power amplifier using the composite right/left-handed (CRLH) transmission lines (TLs) has been realized with one RF Si lateral diffusion metal-oxide-semiconductor field effect transistor (LDMOSFET). The CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of the all harmonic components is very difficult in dual-band, we have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency. Two operating frequencies are chosen at 880 MHz and 1920 MHz in this work. The measured results show that the output power of 39.83 dBm and 35.17 dBm was obtained at 880 MHz and 1920 MHz, respectively. At this point, we have obtained the power-added efficiency (PAE) of 79.536 % and 44.04 % at two operation frequencies, respectively.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.361-370
• /
• 1993

Low power physics tests should be peformed for the domestic pressurized light water reactors (PWRs) after refueling. The tests are peformed to ensure that operating characteristics of the core are consistent with predictions and that the core can be operated as designed. But in some low power physics tests, slow but steady reactivity increasing phenomena were noticed after step reactivity insertion by the control rod movement. These reactivity increasing phenomena are due to the low flux level and the gamma background because an uncompensated ion chamber (UIC) is used as the ex-core neutron detector. The gamma background may affect the results or the lour power physics tests. The aims or this paper are to analyze the grounds of such phenomena, to simulate a reference bank worth measurement test and to present a resolution quantitatively. In this study, the gamma background level was estimated by numerically solving the point kinetics equations accounting the gamma background effect. The reactivity computer check test was simulated to verify the model. Also, an appropriate neutron flux level was determined by simulating the reference bank worth measurement test. The determined neutron flux level is approximately 0.3 of the nuclear heating flux. This level is about 3 times as high as the current test upper limit specified in the test procedure. Then, the findings from this work were successfully applied to Kori unit 4 cycle 7 and Yonggwang unit 1 cycle 7 physics tests.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.2
• /
• pp.133-142
• /
• 2011

The purpose of this study is to analyze the problems of the parties involved in the issuance of apartment housing development projects. The adapted research method selected four apartment housing development as PF ABCP projects. This study carried out the case about participant institution of PF ABCP funding project including developer, constructor, financial institution so as to draw problems by participant institution. On the basis of the selected case, this thesis proposes methods for involved parties to negotiate and work out problems of the PF ABCP. The results of this study are as follows 1) Launching long-term project financing should be developed, including operating funds and strengthen the ABS and ABCP issuance of credit assessment procedures, combined with the simplicity of the instruments. 2) The Low-risk contract for the construction of simple managerial focus should be the construction, financial institutions essentially dependent on project financing feasibility verification purpose loans to prevent the division a true story, the development should be of interest to be preserved. The proposed included, among other, partial guarantee based on the construction plan financial institutions' share-based investment, and the supplement of legal issues.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.2
• /
• pp.197-210
• /
• 2007

This study focuses on the actual condition and level of residents' participation in the case of Jinmok village, located in Jeonnam province Jangheung-gun Hwejin-myeon, and presents suggestions to inspire residents' awareness and enhance participation. This village has been developing a Green Rural Tourism Village Building Project under management of the Ministry of Agriculture and Forestry. Consequently, the importance of residents recognizing they are a "community" has been emphasized as well as promoting the residents cooperation as a community. In addition, it was necessary to research ways to inspire the village to realize the ultimate goal of building rural tourism village. For this, in the beginning of the project, profitable work needed to be provided for the residents to participate in. Constructive participation by all residents is essential in each stage of the project s development. Operating a farm stay or running lodging facilities are options that could be considered. Moreover, it is imperative to immediately establish a awareness about the importance of participation in those who might have a negative or impartial opinion about the project, by providing education. The most efficient way to encourage residents' participation is to support various opportunities for education and field trips. Through these efforts, the residents are able to raise their level of education and develop their man-power as well. Once more, providing an incentive for residents' reliance is the kernel of the project. Considering the state of Korean rural areas, which are rapidly aging and becoming depopulated, green tourism can be a practical alternative for continuing rural development.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.827-836
• /
• 2018

In this study, we developed a PC - based motorcycle simulator based on the development technology of a virtual patrol motorcycle training system. This simulator has been developed to be applied to a variety of fields such as driving training for beginners, driver factor research, and system development such as ABS, which can be seen in advanced models. The weight of the motorcycle operated by the patrol guards is more than 400Kg. There is a lot of risk due to the nature of work without prior practice. Therefore, we implemented a study on the untilization of physical stress and temporal pressure in emergency situations. In order to get a feeling that the motorcycle simulator is operating in real-life, it is important that the mutual reliable signal transmission and operation feel between the driver and the simulator. In order to achieve this, we developed a system that can apply the sub-systems of the actual vehicle to the motorcycle simulator in order to generate the same operation feeling as the actual vehicle. Based on these results, we have developed a method of generating a feedback queue.

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.525-543
• /
• 1998

This paper proposes a conceptual taxonomy of architectures far workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture？ Which of the components is represented as software modules of the workflow architecture？ And how are they configured and operating in the architecture？ The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and "global perspective" to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• The Journal of Information Technology and Database
• /
• v.5 no.1
• /
• pp.97-108
• /
• 1998

This paper proposes a conceptual taxonomy of architectures for workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture. Which of the components is represented as software modules of the workflow architecture\ulcorner And how are they configured and operating in the architecture\ulcorner The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and global perspective to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.37-42
• /
• 2016

The purpose of this paper is to study for the emission gas control of passenger car. The first example, the PCSV never open when operating condition, but it opened by causing malfunction because of trouble. As a result, the purge gas entered into surge tank, a mount of fuel was displayed with excessive supply on tester. Therefore, it certified the bad-condition of the engine when idling by decreasing of fuel injection quantity from engine ECU. The second example, the hose activating a EGR valve didn't supply the vacuum pressure because of assembling the other part. Thus, it knew the bad-condition of engine that the EGR valve would not work normally by leaking with the other port. The third example, as the rear oxygen sensor of two sensor were fault-installing by changing the sensor of other a car it could not detect of oxygen quantity. Finally, it found the phenomenon of abruptly decreasing vehicle speed when braking a car. Therefore, the system including with emission control has to drastically manage by maximizing condition to role decreasing the emission gas.