• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1781-1791
• /
• 2013

The present study was intended to measure the level of psychosocial stress and fatigue symptom according to the various characteristics such as sociodemographic, health-related, job-related, job stress factors, and psychosocial factors among nurses working at ward and operating room in university hospitals, and to reveal the relation between these factors and psychosocial stress and fatigue symptom. The self-administered questionnaires were given to 220 nurses working at ward, and 147 nurses working at operating room in 4 participating hospitals located in Daejeon City during the period from July 1st to Aug 31st, 2012. As a results, the factors related to the psychosocial stress of nurses working at ward were age, subjective health status, job career, satisfaction of work, fit to the job, job demand, job control, coworker support, self-esteem, locus of control, type A behavior pattern. In operating room, there were age, sleep hours, subjective health status, job career, physical burden of work, satisfaction of work, fit to the job, consider quitting the job, job demand, job control, type A behavior pattern. The factors related to the fatigue symptoms of nurses working at ward were age, leisure time, subjective health status, satisfaction of work, consider quitting the job, job demand, locus of control, type A behavior pattern. In operating room, there were age, subjective health status, physical burden of work, supervisor support, coworker support, locus of control. Based on the study results, we suggest that the factors related to psychosocial stress and fatigue symptom of nurses were different from working station. We need development and application of programs to keep under management psychosocial stress and fatigue symptom.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4349-4356
• /
• 2015

This study examine operating system for eco-friendly container terminal and shows the usefulness of the Importance-performance analysis grid in evaluating container terminal operating technology. Importance-performance analysis enables management to evaluate and identify the major strengths and weaknesses of eco-friendly container terminal operating technology's key success factors. This study identified a list of 20 items from the eco-friendly container terminal literature reviews, and each item was rated using a 5-point Likert scale. Responses were obtained from 250 questionnaires. The importance-performance grid shows that 13 items fall into the "Keep up the good work" quadrant, 2 items fall into the "Concentrate here" quadrant, 2 items fall into the "Low priority" quadrant, and 3 items fall into the "Possible overkill" quadrant. The findings suggest that an eco-friendly container terminal operating technology is necessary to enhance eco-friendly operating system. The results are useful in identifying areas for strategic focus to help container terminal managers develop eco-friendly container terminal operating technology strategies.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.687-694
• /
• 1999

The goodness of fit statistics of normality plots are obtained using the Receiver Operating Characteristic(ROC) method. This work is intended to compare with Shapiro-Wilk W statistic. Wel will use and discuss an accuracy of the test and the best cut-off value which minimizes the sum of the type I and II error probabilities.

• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.37-46
• /
• 2023

Due to the aging, advancement, and complexity of chemical facilities, non-routine work such as facility inspection, repair, or maintenance work is increasing. Of the 1,483 accidents that occurred over the past 10 years at chemical product manufacturing sites subject to PSM, accidents that occurred during non-routine work accounted for 56% (932 Cases) of the total. It can be seen that more accidents occur during non-routine work than during routine work. In particular, in order to improve the economy and efficiency of factory operation, there are cases where some facilities are stopped without stopping the entire factory and then inspection, repair, or maintenance work is performed while isolated from the operating facilities. Therefore, first, a safe isolation method must be selected by establishing an isolation standard (Baseline Isolation Standard) based on the chemicals handled, operating conditions, and risk level of the equipment in the chemical plant. Second, since current domestic laws and standards do not suggest the need for specific quarantine standards, it is necessary to institutionalize the preparation of quarantine standards. Technical and institutional improvements are needed to prevent fires, explosions, and poisoning accidents caused by leaks of chemical substances.

• Journal of the Korean Dietetic Association
• /
• v.23 no.2
• /
• pp.180-191
• /
• 2017

The purpose of this study was to identity the probability of cross-contamination from the environment. For this, we examined foodservices at 20 universities/colleges for microbiological analysis of their working facilities and environment as well as their preventive equipment against cross-contamination. Seventy percent of the 20 foodservices were found to maintain one unified working area, which suggests high probability of contamination of food/utensils/equipment in the cooking area by pre-preparation or dish washing. According to the microbiological analysis, the hygiene acceptance ratio of working facilities in the clean zone was 70%, which was higher than the average 45% hygiene acceptance ratio of working facilities in the contamination operating zone. There was a significant difference in the total plate count (P<0.001) and coliform count (P<0.01), which demonstrates that work tables in the clean zone were in a good state compared to those in the contamination operating zone. In the contamination operating zone, refrigerator shelves had a high probability of cross-contamination. Regarding the floor surface and airborne microbes, cooking areas which should be maintained as clean zones had higher cross-contamination probability than those in the contamination operating zone. So corrective actions such as cleaning and sanitizing, keeping dry floors, lowered temperature and humidity, shoe disinfecting facilities, and checking concentrations, are necessary to manage floor surfaces and airborne microbes in the cooking area.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.249-255
• /
• 2017

Efficient operation of induction motor at light loads has been getting wide attention recently because the operating of induction motor at light loads occupies big portion of its operating regions in many applications such as environment friendly vehicle. As one of approaches to improve efficiency, Adaptive Maximum Torque Per Amp (Adaptive MTPA) control for induction motor drives has been proposed to achieve a desired torque with the minimum possible stator current. However, the Adaptive MTPA control was validated only at heavy load where, in general, control scheme tends to perform better than at light loads since the error in measurement of sensors is lower and signal to noise is better. Thus, although the performance of a control scheme is good at rated operating point, its performance at light load is somewhat in doubt in practice. This has led to considerable interest in efficiency of Adaptive MTPA control at light loads. This work experimentally demonstrates performance of Adaptive MTPA control at light loads regardless of rotor resistance variation, thus showing its good performance over all operating conditions.

• Advances in robotics research
• /
• v.2 no.2
• /
• pp.113-127
• /
• 2018

Robotics and automation are rapidly growing in the industries replacing human labor. The idea of robots replacing humans is positively influencing the business thereby increasing its scope of research. This paper discusses the development of an experimental platform controlled by a robotic arm through Robot Operating System (ROS). ROS is an open source platform over an existing operating system providing various types of robots with advanced capabilities from an operating system to low-level control. We aim in this work to control a 7-DOF manipulator arm (Robai Cyton Gamma 300) equipped with an external vision camera system through ROS and demonstrate the task of balancing a ball on a plate-type end effector. In order to perform feedback control of the balancing task, the ball is designed to be tracked using a camera (Sony PlayStation Eye) through a tracking algorithm written in C++ using OpenCV libraries. The joint actuators of the robot are servo motors (Dynamixel) and these motors are directly controlled through a low-level control algorithm. To simplify the control, the system is modeled such that the plate has two-axis linearized motion. The developed system along with the proposed approaches could be used for more complicated tasks requiring more number of joint control as well as for a testbed for students to learn ROS with control theories in robotics.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• IE interfaces
• /
• v.23 no.3
• /
• pp.221-228
• /
• 2010

With the development of science and technology, modern submarines are equipped with high technology devices and multi-functioned precise armaments, consequently, acquisition cost as well as maintenance cost of the submarines are getting higher and higher. However, tight defense budget forces navy to significantly reduce military operating and maintenance costs. In this study, the maintenance and operating costs of submarine Jangbogo-II are estimated through M&S (Modeling and simulation) methodologies in order to reasonably and consistently work out the requirement verification system of Jangbogo-II. The maintenance and operating costs of Jangbogo-II along the next 25 years are estimated as 312.65 billion won via engineering analysis methods while 312.69 billion won from PRICE Model, which shows only 0.04 billion won differences as a whole. This study is expected to be able to provide meaningful decision making data for not only short and/or mid term operating planning but military budgeting.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.2
• /
• pp.162-176
• /
• 2014

Purpose: The purpose of this study was to perform an operating room nursing activities analysis and estimate nursing intensity of each nursing activity based on the Relative Value Scale (RVS). Methods: The methodology for this study of RVS was based on the work of Hsiao et al. The first stage was to identify nursing activities and the second to measure intensity of nursing activities including technical skill, mental effort, and stress. Results: Calculation of the RVS for 99 nursing practices showed a score range from 300.00 to 1337.78. CS operation assistant, OS operation assistant, and obtaining certification had high nursing intensity. Surgical hand washing, putting on surgical gowns, surgical gloves and surgical caps and mask had low nursing intensity. Conclusion: The activities of operating room are not compensated separately but reimbursement is usually included in physician fees. In the future, an estimation of nursing cost should show the nursing contribution rate to total operation revenue.