• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1567_1567
• /
• 2009

In this article, we deal with the IED(Intelligent Electronic Device) on the EMC aspect. Recognizing how expensive the thorough EMC work will be regarding the entire IED, we focus on the characteristics of RF signals moving along multiple TX-lines in one specified example of the typical IED structure, say, the layer of trace lines. Simplifying the real structure, we run a 3D EM program and analyze the properties of signals on the lines and interference due to the coupling between the neighboring lines.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.352-354
• /
• 2011

The performance of multihop cognitive radio networks (CRN) can be improved significantly by using multiple channels in spectrum underlay fashion. However, interference due to the sharing of common radio channel and congestion due to the contention among those flows that share the same links become an obstacle to meet this challenge. How to control efficiently congestion and allocate power optimally to obtain a high end-to-end throughput is a key objective in this work. We reexamined the Network Utility Maximum (NUM) problem with a new primary outage constraint and proposed a novel resource allocation strategy to solve it effectively and efficiently.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1954-1971
• /
• 2017

In this work, first, a multiuser detection (MUD) algorithm based on component-level soft interference cancellation and linear minimum mean square error (CLSIC-LMMSE) is proposed, which can enhance the bit error ratio (BER) performance of the traditional SIC-LMMSE-based MUD by mitigating error propagation. Second, for non-binary low density parity check (NB-LDPC) coded high-order modulation systems, when the proposed algorithm is integrated with partial mapping, the receiver with iterative detection and decoding (IDD) achieves not only better BER performance but also significantly computational complexity reduction over the traditional SIC-LMMSE-based IDD scheme. Extrinsic information transfer chart (EXIT) analysis and numerical simulations are both used to support the conclusions.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.382-384
• /
• 2005

When a hearing aid' s user is listening through telephone or cellular phone, he/she usually suffers from severe electrical magnetic interference noise. It is because hearing aids amplify voice signal as well as background noise. A telecoil, an induction coil, is a possible solution for the problem. Because a telecoil has the characteristic of high pass filter, it has some problem of resulting increased high frequency noise. For solving this problem, we can use a capacitor connected with the telecoil in parallel. According to capacitance, receiving signal quality may change. In this paper, proper capacitor values for the best sound quality are investigated by experimental work.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.551-553
• /
• 2005

When a hearing aid' s user is listening through telephone or cellular phone, he/she usually suffers from severe electrical magnetic interference noise. It is because hearing aids amplify voice signal as well as background noise. A telecoil, an induction coil, is a possible solution for the problem. Because a telecoil has the characteristic of high pass filter, it has some problem of resulting increased high frequency noise. For solving this problem, we can use a capacitor connected with the telecoil in parallel. According to capacitance, receiving signal quality may change. In this paper, proper capacitor values for the best sound quality are investigated by experimental work.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.597-600
• /
• 2014

In this work, the electromagnetic interference shielding effectiveness (EMI-SE) of carbon nanotube/carbon fiber-reinforced HDPE matrix composites are investigated with various preparation conditions, such as the carbon fiber and carbon nanotube content, the presence of metal additives, as well as mixing speed and time. It was found that the EMI-SE of the composites increased with filler contents and metal additives. These results indicate that the content and length of carbonaceous fillers determine the electric networks in the composites, resulting in the control of the EMI-SE of the composites.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.25-40
• /
• 2015

Understanding the effects of the parameters affecting the interaction of tandem hydrofoil system is a crucial subject in order to fully comprehend the aero/hydrodynamics of any vehicle moving inside a fluid. This study covers a parametric study on tandem hydrofoil interaction in both potential and viscous fluids using iterative Boundary Element Method (BEM) and RANSE. BEM allows a quick estimation of the flow around bodies and may be used for practical purposes to assess the interaction inside the fluid. The produced results are verified by conformal mapping and Finite Volume Method (FVM). RANSE is used for viscous flow conditions to assess the effects of viscosity compared to the inviscid solutions proposed by BEM. Six different parameters are investigated and they are the effects of distance, thickness, angle of attack, chord length, aspect ratio and tapered wings. A generalized 2-D code is developed implementing the iterative procedure and is adapted to generate results. Effects of free surface and cavitation are ignored. It is believed that the present work will provide insight into the parametric interference between hydrofoils inside the fluid.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.470-477
• /
• 2001

Multucarrier code-division multiple access(MC-CDMA) is one of the promising technique for high capacity wireless communication. Hower the carrier phase error and frequency offest cause the performance degradation of MC-CDMA due to the inter-carrier interference. In this work, downlink performance of the partially coherent MC-CDMA is analytically derived in Rayleigh fading channels. The bit error rate sensitivity by combining method, Maxiaml ratio combining (MRC)and Equal gain combining(EGC), is compared as functions of phase errors. multi-user interference, and received signal-to-noise ratio. The results show that the susceptibility for the performance degradation of EGc and MRC is negligible for loop SNR's of above 15 dB and above 10 dB, respectivtely.

• Computers and Concrete
• /
• v.12 no.6
• /
• pp.775-783
• /
• 2013

A novel reliability-based work model of k/n (G) system has been developed. Unit failure probability is given based on the load and strength distributions and according to the stress-strength interference theory. Then a dynamic reliability prediction model of repairable k/n (G) system is established using probabilistic differential equations. The resulting differential equations are solved and the value of k can be determined precisely. The number of work unit k in repairable k/n (G) system is obtained precisely. The reliability of whole life cycle of repairable k/n (G) system can be predicted and guaranteed in the design period. Finally, it is illustrated that the proposed model is feasible and gives reasonable prediction.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.69-74
• /
• 2000

Roughness of curved surfaces finished with flexible tools depends on the tool/work contact pressure and area. In this study, non-Hertzian closely conforming elastic contact theory is employed to analyze the tool/work contact and to generate a tool path producing a constant pressure at initial contact points. Finishing experiments on curved surfaced are conducted using the tool path. For comparison, curved surface finishing is also performed along the tool path producing a constant tool/work interference depth. It is demonstrated that the tool path of constant contact pressure improves the finished surface roughness.