• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1128-1137
• /
• 2012

Objectives : The purpose of this study was to identify the factors that affect working environment related musculoskeletal subjective symptoms among dental hygienists. Methods : The subjects in this study were 232 dental hygienists working at dental clinics and general hospitals in Daegu. The data has collected through the self-questionnaire survey from July 9th 2012 to July 31th. Results : 1. Musculoskeletal subjective symptoms were 85.3% in shoulder(right), 81.9% in neck, 74.6% in shoulder(left), 65.5% in wrist(right), 56.5% in lower leg(right). 2. Pain frequency of musculoskeletal subjective symptoms were the highest 24.7% in neck. Seeing the severity pain was the highest 9.0% in foot(left). The investigation of work interference related to substantially pain showed the highest 18.5% in wrist(right). 3. Musculoskeletal subjective symptoms correlated with general characteristics such as age, marital status, regular exercise and medical check-up(p<.05). 4. Musculoskeletal subjective symptoms correlated with working environments such as working career, the night treatment, the average daily number of patients handled, the average daily standing work hours, the regular rest, the major job in work place and physical burden(p<.05). Conclusions : The education or program on wrong working habits and bad postures of dental hygienists is needed to prevent musculoskeletal disorder.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.97-104
• /
• 2015

Apartment Housing 25 in the field of construction since 2000 collected by types of labor: reinforced concrete, plaster, internal, equipment, electrics communication, the other work. And the performance of labor input was collected in the amount of construction work performed on a monthly basis. After changing the construction period in the standardization work that is 100% of the construction period, the amount was converted into labor ratio by type. Analysis of the input flow rate and the amount of labor conclusions were as follows: (1) The size of the labor rate is reinforced concrete work (38.25%), plastering work (5.10%), internal work (5.67%), equipment work (9.10%), electrics communication (8.76%), the other works (33.12%) and the size of labor rate is the largest work in reinforced concrete work. (2) The peak of labor input ratio was from 52.5% month to 62.5% month. This was when the labor rate of 3.6%. (3) The period month of the largest labor ratio% is 35% month by reinforced concrete construction, and this time it was 2.12% per month labor rate, and reinforced concrete construction is finishing from 65% month to 80% month. This showed the greatest congestion of mutual interference between each works is being continue. The results of this study are the greatest congestion in apartment housing construction has informed the high period(%months), which is essential to a successful project.

• Journal of Hospice and Palliative Care
• /
• v.6 no.1
• /
• pp.34-44
• /
• 2003

Purpose : The purpose of this study was to elucidate the effects of hospice care on pain management of the terminal cancer patients. Method : The subjects of the study were 37 terminal cancer patients hospitalized in the general hospital in JeonJu with the hospice care nit. The data were collected using the questionaire with interviews from July to Nov. in 2000. The severity and interference of pain were examined with the self reported survey based on the Korean version of Brief Pain Inventory (BPI-K). The data were analyzed with the mean, SDs, paired t-test. The hospice care to provide for three weeks. Results : 1) The mean scores of the worst pain for the last 24-hours measured with the pain severity of BPI-K were pre-intervention (6.35) and post (4.76). The pain interference of BPI-K in pre-intervention was enjoy (8.22), work (7.46), walk (7.08) and activity (7.08), while post was of enjoy (6.62), work (6.43), walk (6.11) and activity (5.78), respectively. 2) In pain severity, significant difference was found between the pre-intervention and post in all of followings. - worst pain for last 24 hours (t=4.085, P=.000) - least pain for last 24 hours (t=4.020, P=.000) - average pain for last 24 hours (t=4.254, P=.000) - pain right now (t=4.017, P=.000) 3) In pain interference, significant difference was found between the pre- intervention and the post in all of followings. - activity (t=3.137, P=.003) - mood (t=6.713, P=.000) - walk (t=2.027, P=.050) - work (t=2.132, P=.040) - relate (t=4.143, P=.000) - sleep (t=4.071, P=.000) - enjoy (t=3.881, P=.000) Conclusion : The terminal cancer patients who were offered hospice care had significantly lower hospice care pain and pain interference than those without hospice care. According to these results, hospice care can be regarded as an effective modality in relief of pain in the terminal ill-patients.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.256-261
• /
• 2008

The curtain-wall work has been more frequently applied in the construction industry since demand of high-rise buildings has been increased. The curtain-wall work is usually performed with the frame work simultaneously for reducing construction period, but it might be delayed because of several problems caused by interference of process. However, there is not an appropriate tool which can be used by a work manager for adjusting quantity of the construction equipments or the workers when the curtain-wall work was delayed. To resolve this problem a construction simulation anticipating and analyzing potential problems before starting the work can be applied in the curtain wall work. This research suggests a general model for the curtain-wall work by using construction simulation and produces a combination of construction equipments and workers which can estimate optimum work productivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1631-1636
• /
• 2015

With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.28-35
• /
• 2006

Recently, a number of equipments related with electricity, electronics, and communication in the same building are needed to the grounding system for safety from unexpected accidents. When the faulted electric current flows into a certain grounding system, the potential rise in that system takes place and it might induce the potential rise to other grounding system. This potential interference was strongly affected by the surface potential, which was deeply related with the electrode shape. In this paper, the fundamental formula was deduced on the basis of surface potential of two grounding electrodes. Which corresponds to source of the potential interference and other grounding electrode, respectively. Therefore, the degree of potential interference in this mesh grounding electrode system was verified by the simple model simulation. In addition, in order to identify the difference between the grounding resistance in the realistic construction site and the expected value from the corresponding simulation, the experiment was performed with model on a reduced scale about the realistic grounding system. It consists of stainless steel hemisphere electrodes in a water tank. From this work, the grounding resistance in the mesh grounding electrode showed the good coincidence results between those. Consequently, it is confirmed that the grounding resistance in the mesh electrode is possible to be estimated by performing the experiment using the water tank model.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.905-917
• /
• 1999

멀티미디어 시스템에서 수행되는 부하 중 상당 부분은 정해진 시간에 주기적으로 수행되어 연속 매체(continuous media)를 처리하는 주기 태스크들이다. 연속 매체들을 처리하는 두 주기 태스크의 수행 요청 시간(release time)간에 인공적인 위상(phase)을 줄 경우, 전체 부하의 처리 타이밍에 영향을 주게 되며, 특히, 적절한 위상을 부여할 경우 부하가 고르게 분산된다. 부하의 고른 분산은 태스크 간섭을 줄여 지터(jitter), 종료시한 초과(deadline miss), 그리고 긴 응답 시간(response time) 등의 문제를 해소시킨다. 본 논문에서는 새로운 위상 스케줄링(phased scheduling) 알고리즘 및 알고리즘을 개발하고 평가할 수 있는 실험 환경을 제안한다. 본 논문에 제시된 알고리즘은 저자들의 선행 논문 1 에서 제시한 알고리즘의 대안이다. 새로운 알고리즘은 정확하게 최적의 위상을 찾지는 않으나 기존 알고리즘보다 빠르게 수행되며 적용 범위가 넓다.Abstract A multimedia system consists of substantial amount of continuous media workload scheduled periodically at deterministic time points. Artificial phase between the invocation times of any two continuous media tasks affects the timing of the entire workload. A proper phase configuration distributes workload uniformly over time and reduces task interference that may otherwise result in jitter, deadline miss, and long response time. The objective of this paper is to work out a phased scheduling algorithm and to evaluate its effectiveness. The algorithm in this paper is an alternative approach to our previous work 1 . It is almost as accurate as the predecessor but two of three times faster in identifying the appropriate phase vector.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.801-802
• /
• 2009

Currently, XML and its schema language have become the standard for data representation and information exchange format on the current web. Unfortunately, problems happen when integrating different data sources since XML mainly supports the document structure but lack consideration on sharing knowledge of data. Meanwhile, Semantic Web technologies, such as Web Ontology Language (OWL), can include the structure as well as the semantics of the data. Therefore, finding a way to integrate XML data as OWL ontology receives a high interest nowadays. In this paper we present a mapping notation to convert XML Schema to OWL domain knowledge and an effective method to transform XML instances into OWL individuals. While keeping the XML original structure, our work also adds more semantics for the XML document. Moreover, whole of the transformation processes are done automatically without any user interference. Further, our transforming approach provides the solution for duplicate element names in XML document which has not mentioned in the previous work. Our results in existing OWL syntaxes can be loaded immediately by OWL editors and Semantic Web applications.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1132-1132
• /
• 2001

This work is a further development of the method created by G. Krivoshiev in 1996 for elimination of peel interference and prediction of fruit flesh optical density. In this investigation, as it was earlier, the objects are observed as being structured by three successive layer “AlongrightarrowOlongrightarrowB” denoting “peel-flesh-peel”. In the first version of the method the transmittances of the surface layers A and B were measured according to Kubelka-Munk theory by means of their diffuse reflectance. At that the overall transmittance T was approximated in the form of a multiplication approximation being valid for plane-parallel layers of a non-scattering material. In this work this approximation was done away with applying the theory of discontinuum, respectively Benfor's equations. As a result two mathematical models were created for non-destructive prediction of fruit flesh optical density. These models are different from the ones based solely on Kubelka-Munk theory, the destruction being marked by the terms 1n (1 - $R_{A}R_{0}$) and 1n (1 - $R_{A}R_{B}$), where: $R_{A}$ and $R_{B}$ are reflectance values for the surface layers A and B; $R_{0}$ is the average reflectance of the internal layer that could be obtained empirically by means of a preliminary measurement of sufficiently large number of physically peeled fruits of a given species and variety.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.82-92
• /
• 2011

This paper presents a PFC(Power Factor Correction) system to control the power factor of input current of the converter system which is working in the propulsion system of KTX high speed train. In the KTX train system, initially introduced from ALSTOM, the thyristor converter with phase controlling technique is adopted in the current fed type powering system. The input current induces harmonic losses highly because the waveform becomes rectangular shapes according to the filter inductor current increased as the train speed increasing gradually. Especially the interference with the signalling systems is severe concerned due to high current harmonics on the catenary line. To protect this problem, a frequency trap filter(notch filter) is operating with the input converter system. In this paper, an analysis work and PC simulation have been done on the PFC system to upgrade its performance and maintenance efficiency.