• Clean Technology
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2008

In order to choose alternative environmental-friendly cleaning agents, it is very important in the present point that the systematic selection procedures should be introduced and applied to the industry through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. Thus, a novel cleaning evaluation method utilizing optically stimulated electron emission (OSEE) among various methods of cleaning ability was studied in this study. The contaminants used in this cleaning experiments were flux, solder, grease, cutting oil, and mixed soil of 35% grease and 65% cutting oil. The cleaning agents developed or prepared in our laboratory were employed and their cleaning ability were comparatively evaluated by the OSEE, gravimetry and contact angle methods. The experimental results in this work showed that flux cleaning efficiency measured by the OSEE method was similar to that of the gravimetric method, but that the OSEE method could not be compared with gravimetric method for the case of solder or grease cleaning because the contaminants radiate or absorb ultra-violet light. In case of cutting oil cleaning, the gravimetric method indicated its limitation of cleaning efficiency of cutting oil since it showed cleaning efficiency of 100%, even though residual soil remaining on the substrate surface a little after its cleaning. The comparative experimental results of cleaning ability evaluated by the OSEE- and contact angle measurement methods showed that they were similar in case of cleaning of flux, mixed soil and cutting oil. It was judged that the contact angle measurement method could evaluate the cleaning ability more precisely than the OSEE method for cleaning solder and grease.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.565-575
• /
• 2014

Objective: The aim of this study is to evaluate the effect of weight of load and time on the physical workload of repetitive upper-limb tasks with handling light weight loads using EMG and perceived discomfort, and to investigate the relationship between EMG and perceived discomfort for those repetitive tasks of moving light weight loads. Background: Repetitive upper-limb motion is known as one of the main risk factors of musculoskeletal disorders, and a lot of repetitive tasks are carried out while handling light weight loads in the industry. In evaluating the workload of repetitive tasks handling light weight loads, EMG and perceived discomfort can be used, though their relationship in those work conditions are not much investigated. Method: A laboratory experiment with 18 healthy males were conducted to record EMG signals from 5 muscle sites of the right arm and shoulder and rate perceived discomforts for the body parts and the whole body while carrying out repetitive materials-handling tasks for 52min. The subjects were divided into 3 groups which handled the loads of 1kg, 2kg and 3kg, respectively. ANOVAs were conducted to analyze the effects of the weight and time on RMS of EMG amplitude (normalized RMS: NRMS), median frequency of power spectrum of EMG (normalized MDF: NMDF) and perceived discomfort. The correlations between NRMS and NMDF and perceived discomfort were also analyzed. Results: Statistically significant muscular fatigue effects were not found from NRMS and NMDF in most muscles, while there were significant increases of discomfort as the task time elapsed. It was shown that there were an increasing trend of the muscular activity as the weight of load increased and a decreasing trend of median frequency of EMG of upper and lower arms as time elapsed. It was found that there were significant negative correlations between NMDFs from the lower arm and discomfort ratings, though the relationships were weak. Conclusion: It can be concluded that the working conditions adopted in this study were not enough to induce muscular fatigue, while there was significant increase in perceived discomfort. A further study is necessary to integrate the objective and subjective measures for more reliable and sensitive evaluation of workload of repetitive tasks of handling light weight loads. Application: This study can be used as a basic study for the evaluation of workload of repetitive tasks handling light weight loads.

• Journal of the Korean Dietetic Association
• /
• v.5 no.2
• /
• pp.194-204
• /
• 1999

The objectives of this study were to assess the current practices of implementing selective menus and to identify the perception of foodservice manager and customer on selective menus for hospital foodservice would be fulfilled. Two types of questionnaires for hospital foodservice managers as well as customers were developed. Questionnaires were distributed to managers of 8 hospital foodservice department and 317 customers of patient meal service, and 6 managers and 139 customers were responded. The data were analyzed using frequency and t-test. The results of this study can be summarized as follows : 1. In hospital foodservice operations, the selective menu pattern was first introduced by L hospital on June 1994 in Seoul and recently 8 hospitals were currently implementing selective menus. But using rate of selective menus by patients were relatively low(23.2%), ranging from 15% to 32%. 2. Customers' needs for selective menus were rated significantly higher in the group of patients(4.24/5) who chose the selective menus than their counterpart(3.88/5). 3. The main reason not choosing selective menus was identified by patients as 'not knowing the implementation of selective menus'(52.6%), inconvenient factors in using selective menus for customer were also identified as orders : 'lack of nutrition information on menu item'(38.6%), 'complexity in procedure'(29.8%), and 'lack of menu variety'(26.3%). However managers considered 'managerial burden' and 'limited human resource' as main obstacle to implement the selective menu pattern. 4. Customers indicated 'variety of menu', 'active public relations' as effective methods to enhance using rate of selective menus, however, foodservice manager indicated 'variety of menu'(50%), 'improvement of quality'(16.7%), and 'simplicity in procedure'(16.7%). Based on the results of this study, following recommendations have been suggested : Managers in patient meal service should recognize customer needs for implementing selective menus and pay more attention in implementing selective menus and activating this program. For more effective implementation of activating selective menu program, the foodservice department should establish action plan on 'active publicity work', 'simplicity in procedures', 'variety of menu' and 'improvement of quality'. Especially nutrition informations on meals should be provided for customers in order to elevate participation rate.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.171-177
• /
• 2022

In this paper, we propose a service method that can provide insight into multi-source agricultural data, way to cluster environmental factor which supports data analysis according to time flow, and curate crop environmental factors. The proposed curation service consists of four steps: collection, preprocessing, storage, and analysis. First, in the collection step, the service system collects and organizes multi-source agricultural data by using an OpenAPI-based web crawler. Second, in the preprocessing step, the system performs data smoothing to reduce the data measurement errors. Here, we adopt the smoothing method for each type of facility in consideration of the error rate according to facility characteristics such as greenhouses and open fields. Third, in the storage step, an agricultural data integration schema and Hadoop HDFS-based storage structure are proposed for large-scale agricultural data. Finally, in the analysis step, the service system performs DTW-based time series classification in consideration of the characteristics of agricultural digital data. Through the DTW-based classification, the accuracy of prediction results is improved by reflecting the characteristics of time series data without any loss. As a future work, we plan to implement the proposed service method and apply it to the smart farm greenhouse for testing and verification.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.119-141
• /
• 2000

The current industrial health service is shifting to health improvement business with 1st primary prevention-focused service from secondary and tertiary prevention-focused business, and Oriental medicine can provide such primary prevention-focused service due to the characteristics of its science. In particular, the advanced concept of health improvement can match the science of health care of Oriental medicine. Notably, what is most important in health improvement is our lifestyle, This does not underestimate the socio-environmental factors, which have lessened their importance due to modernism. The approach of Oriental medicine weighs more individuals' lifestyle and health care through self-cultivation. This matches the new model of advanced health business. Oriental medicine is less systemized than Western medicine, but it can provide ample contents that enhance health. If we conceive health-improvement program based on the advantages provided by these two medical systems, this will influence workers to the benefit of their health. Also, health Program needs to define factors that determine individual lives, and to provide information and technologies essential to our lives. The Oriental medicine approach puts more stress on a subject's capabilities than it does on the effect his surrounding environment can have. This needs to be supported theoretically by not only defining the relations between an individual's health state and his lifestyle, but also identifying the degree to which an individual in the industrial work place practices health improvement lifestyle . This is the first step toward initiating health-improvement business . In order to do this, this researcher conducted a survey by taking random samplings from workers, and can draw the following conclusions from it. 1 The sampled group is categorized into', by sender, female 6.6%, and male 93.4%, with males dominant; by marriage status , unmarried 43.9% and married 55.6%, with both similar percentage, and, by age, below 30, 48.4%, between 30 and 39, 27.4%, between 40 and 49, 18.2%, and over 50, 6.0%. The group further is categorized into; by education, middle school or under 1.7%, high school 30.5%, and junior college or higher 65.8% with high school and higher dominant: and by income, below 1.7 million won 24.2%, below 2.4 million won 14.8%, and above 2.4 million 6.3% Still, the group by job is categorized into collegians with 23.9%, office worker with 10.3%, and professionals with 65.8% , and this group does not include workers engaged in production that are needed for this research, but mostly office workers . 2. The subjects selected for this survey show their degree of practicing health-improvement lifestyle at an average of 2.63, health management pattern at 2.64, and health-related awareness at 2.62 The sub-divisions of health-improvement lifestyle show social emotion (2.87), food (2.66). favorite food (2.59), and leisure activities (2.52), in this order for higher points. It further shows health awareness (2.47) and safety awareness (2.40), lower points than those in health management pattern . 3. In the area of using leisure time for health-improvement, males, older people, married, and people with higher income earn higher marks. And, in the area of food management, the older and married earn higher marks . In the area of favorite food management, females, lower-income bracket, and lower-educated show higher degree of practice , while in the area of social emotion management, the older. married, and higher-income bracket show higher marks. In addition, in the area of health awareness, the older, married, and people with higher-income show higher degree of practice. 4. To look at correlation by overall and divisional health-improvement practice degree , this researcher has analyzed the data using Person's correlation coefficient. The lifestyle shows significant correlation with its six sub-divisions, and use of leisure time, food, and health awareness all show significant correlation with their sub-divisions. And. the social emotion and safety awareness show significant correlation with all sub-divisions except favorite food management.

• Journal of agricultural medicine and community health
• /
• v.25 no.2
• /
• pp.245-263
• /
• 2000

This study was conducted to provide the basic data about the health effects of pesticide exposure among farmers for agricultural health study. We analyzed 412 self-administered questionnaires collected from the male farmers who spray pesticides in Kyoung-ju area, Korea. Survey questions were about chronic symptoms, acute symptoms while pesticide spraying, pesticide intoxication accident, safety rules, protective equipments etc. The correlations among the variables related to pesticide exposure and the factors in acute pesticide poisoning and chronic symptoms of farmers were also analyzed. For chronic symptoms, the prevalence of 'tiredness and languor', 'lumbago', 'nocturia', 'shoulder pain', 'numbness', and, for acute symptoms while pesticide spraying, the experience rate of 'itching sense of skin', 'dizziness/headache', 'fatigue', 'eye glaring' were high compared with other symptoms. For 'experience of intoxication accident by pesticide in family', 7.1% of the subjects experienced the accident and the causes were pesticide spraying, food contamination by pesticide, suicide etc. Among safety rules, 'take a bath after spraying', 'change clothes after spraying' were kept relatively well, and, for protective equipments, hat, boots, mask, gloves, protective clothes(lower) were put on relatively well. The factors associated with acute pesticide poisoning were the extent of keeping safety rules, spraying time, orchard cultivation, agricultural area and spraying days per year etc. And the factors associated with chronic symptoms were acute symptoms while pesticide spraying, agricultural area, farming career, extent of keeping safety rules, extent of agricultural work and the pesticide exposure index etc. From these results, it is suggested that to reduce the health effects by pesticide exposure among farmers, the education to promote to keep safety rules and wear protective equipments, and information services should be recommended. And further studies on the long term health effects of pesticide exposure among farmers are required.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.86-106
• /
• 2002

Informatization is a process that corporation's external environmental factors and internal environmental factors influence as complex. is a phenomenon that appears via this process. To evaluate that informatization was propeled well or informatization level is high can be dangerous work extremely by only once-over-lightly some factors, organization information ability is superior or infrastructure is constructed well. Therefore, an evaluation for industrial information systems that consider corporation's external environment and internal environment configurationally and objective estimation through this is required in national dimension. This research sorted types of business using types of business classification of 2001 EIII(Evaluation Indices of Industrial Informatization) laying stress on corporation's product and product production process for reflecting various industrial classification. And we are dividing whole our country corporations by manufacture industry, the construction industry, distribution industry, service industry, banking industry 5 types of business. To see such classed types industry classification from consistent viewpoint, we saw them within new framework, purchase, operation, physical distribution, marketing and sale. service etc. laying stress on primary businesses except support businesses of planning, financial management etc. To draw special quality of business center from primary business of each types of business, we draw industry classification Key Capability that centers when plans corporation's corporate strategy and information strategy. And we deducted industrial classification key production business connected with industry classification Key Capability. After drawing an evaluation items for industrial information systems in informatization analysis viewpoint laying stress on drawn businesses. Finally we did Case Study by making out an evaluation for industrial information systems questionnaire that considers special quality of manufacturing industry. Through EIII that consider the industrial classification, we could know that it explains the corporation's purchase, production, distribution in general and detail.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.153-161
• /
• 2010

The purpose of this study was to examine the appearance of norovirus in the water for food in food service institutions and the influence of physicochemical and microbial factors of norovirus in order to work out basic data to predict the detection of norovirus. Among 82 samples of water for food in food service institutions, norovirus appeared in 7 samples and the rate of appearance was 8.5%. As for the type of norovirus, one samples contained GI type (genotype GI-6) and six samples contained GII type (genotype GII-2, GII-4, GII-12). In the regression model of prediction of norovirus, the rate of appearance was correlated with $NH_3$-N, total solids and the consumption of $KMnO_4$, out of such variables as $NH_3$-N, total solids, the consumption of $KMnO_4$, depth, chloride and total colony counts, and its contribution rate for effectiveness was 78.60%. In order to examine the influential factor of environment upon the detection of norovirus, Pearson's correlation analysis was carried out. The predictable regression formula for appearance rate of norovirus was expressed as -1.818 + 42.677 [$NH_3$-N] + 0.023 [total solids] + 0.762 [consumption of $KMnO_4$] -0.009 [depth] -0.146 [chloride] + 0.007 [total colony counts] (R = 0.904, $R^2$ = 0.818, adjusted $R^2$ = 0.786, p < 0.05). The most influential factors upon the detection of norovirus were $NH_3$-N, total solids and the consumption of $KMnO_4$. In other words, when the measured values of $NH_3$-N, total solids and the consumption of $KMnO_4$ were higher, the possibility of appearance of norovirus increased.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.263-276
• /
• 1994

The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.333-340
• /
• 2017

The prevalence of periodontal disease was steadily increased. The best prevention methods for periodontal disease are teeth brushing and scaling. The purpose of this study was to investigate the status of scaling experience and related factors among some workers. Total 455 workers in 5 manufacturing companies in Gwangju were selected using convenience sampling method. General characteristics, work-related characteristics, oral health-related characteristics and scaling experience were collected by self-reported questionnaires. Chi-square tests, t-tests and multiple logistic regression analysis were performed to investigate the factors influencing the scaling experience using SPSS software. Statistical significance was defined as a p-value<0.05. The proportion of scaling experience during the past year was 47.0%. In simple analysis, age, current working position, number of oral disease, interest in oral health, use of secondary oral products, oral health screening use, oral health education experience and awareness of scaling inclusion in the National Health Insurance (NHI) coverage were associated with scaling experience. Finally, the odds ratios (ORs) for scaling experience were significantly higher in younger subjects (adjusted OR [aOR], 3.09; 95% confidence internal [CI], 1.60~5.96), assistant manager (aOR, 2.68; 95% CI, 1.55~4.63), subjects with high interest in oral health (aOR, 2.15; 95% CI, 1.02~4.52), subjects with oral health screening use (aOR, 2.76; 95% CI, 1.50~5.11) and awareness of scaling inclusion in the NHI coverage (aOR; 2.91, 95% CI, 1.80~4.72) in multiple logistic regression analysis. Scaling experience was relatively low (47.0%). The related factors with scaling experience were age, working position, use of screening and awareness of scaling inclusion in the NHI coverage. Considering these factors will increase the utilization rate of scaling.