• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.317-330
• /
• 2021

Objectives: By law, companies in Korea must periodically measure workers' exposure to harmful chemicals (the system is called the Work Environment Monitoring Program (WMP)[a]) and report the results to the government. The government also measures exposure to monitor the WMP's reliability (called Reliability Assessment (RA) for WMP[b]). The issue is that measured data from these two sources are so different that the objectivity of WMP needs to be confirmed by comparing the results using the European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA). Methods: Step 1: Data collection from WMP reports submitted by companies (n=586) and RA for WMP written by the government (n=33). Step 2: Data Standardization by key information included. Step 3: Data conversion to input-variables required to run the ECETOC TRA model, and run the model with specific data (n=514) which meet the predetermined exposure scenario. Step 4: Statistical data analysis by process category (PROC) and ventilation type from each source ([A] and [B]). Step 5: Additional analysis of any unexpected results. Results: The process categories of the production and handling of Dichloromethane were classified into 12 PROCs, and ten of them were selected to run ECETOC TRA. Modeled values tended to be higher than measured values from both sources. For the measured values from WMP, RCR distribution by PROC was narrow (0.197-0.267, 95% CI) and did not have a relationship with ventilation type, which differs from the tendency of the modeling result. Meanwhile, the measured values from RA for WMP were relatively widely distributed (0.301-1.177, 95% CI) by PROC. In particular PROCs (13,19) were high enough to exceed 1. Also, they become low with better ventilation types and appear differently depending on the ventilation type, similar to the model result. Conclusions: This study revealed that ECETOC TRA might have the potential to serve as a screening tool for exposure assessment and to be used as assistive method for WMP to estimate exposure. Further empirical study is required to confirm its availability as a screening tool.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.182-194
• /
• 2009

This study was conducted to evaluate health status and to propose health protection measures of irregular plant construction workers in Yoesu National Industrial Complex (YNIC). The status of safety and health management was examined in five areas including safety and health education, work environment monitoring, health examination, health management record, and personal protective equipment (PPE) for plant construction workers. The safety training rate for plant construction workers was reached high at 91%, The training was mostly consisted of safety accident related things, but training on hazardous materials was found to be insufficient. Workplace monitoring results showed that the compliance rate for work environment for irregular construction workers was 54% and workplace monitoring during turnaround (TA) period with high risk of exposure to hazardous agents has not been implemented. While 61.4% of irregular workers received the general health examination but only 36.8% received the special health examination. The special health examination was found to be conducted only upon welders from 2-3 years ago. The issue of health management record upon irregular construction workers was not being implemented. In case of PPE, basic safety protective equipments such as safety shoes, safety belt, safety helmet were being supplied well while the supply rate of respirator for organic vapor was relatively low at 40%. Based on this study, two suggestions to maximize the utilization of the current safety and health program were made while boosting its effectiveness in protecting workers' health. First, the role of owners (petrochemical plant) related to safety and health should be strengthened. Second, in consideration of the characteristics of construction workers who usually engage in short term employment and frequent movement, community based health management organization is suggested that can overcome such structural problem and carry out the implementation of health examination and sustained health management.

• 현장농수산연구지
• /
• 제18권1호
• /
• pp.101-112
• /
• 2016

본 연구는 원예시설의 원격제어에 대한 불안감을 해소하고 신뢰성을 확보하기 위하여 감시 및 제어 기능과 안정성을 높인 ICT기반 온실제어시스템을 개발하고 비닐하우스에 적용하여 그 성능을 검증하고자 하였다. 온실 환경 제어 시스템은 온실의 환경 정보를 취득하는 센서와 센서G/W로 구성된 센서부와 온실의 환경을 제어하는 PLC, 이더넷 통신을 통해 환경 정보 데이터와 구동부의 작동상태를 수집하고 외부 서버와 연계되어 환경정보와 제어정보를 전달하는 로컬서버, 천.측창, 커튼 등을 작동시키는 구동부, 재배작물과 작동부 감시를 위한 카메라 등으로 구성하였다. 온실 환경 제어 시스템은 현장제어와 원격 제어 간의 충돌을 방지하기 위해 원격/로컬 상태 구분을 위한 선택 스위치와 원격제어에 따른 안전성을 확보하기 위한 안전장치를 마련하였다. 즉, 각 내부장치를 동작시키는 전자개폐기, 조작 스위치로부터 상태를 수집하며, 모터 등 과부하 발생 시 과부하계전기의 TRIP신호를 감지하여 운영자의 컴퓨터와 스마트폰으로 경보가 보내지도록 구현하였다. 소프트웨어는 웹브라우저를 이용한 HMI(Human Machine Interface) 구현으로 관리자 페이지를 통해 다수의 브라우저에서도 지원 가능하도록 하였다. 또한, 모바일 웹방식을 도입하여 안드로이드, 아이폰 등 운영체제와 상관없이 구동할 수 있도록 구현하였다. 제어화면은 운영자가 한눈에 알아보기 쉽게 온실의 모형과 부대 장치와 작동기기를 이미지화하여 동작 상태를 표시하도록 하였으며, 작동 버튼을 클릭하여 수동조작도 가능하도록 구현하였다. 온실 환경 제어 시스템 성능시험결과 천창, 측창, 수평커튼, 측면커튼은 작동 조건에 따라 모두 성공적으로 작동함을 확인하였다. 또한, 소프트웨어의 데이터 수집 및 디스플레이 상태, 이벤트 출력, 영상모니터링 등 계측 및 제어성능 모두 양호하게 나타났다.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.854-860
• /
• 2014

Workers engaged in car inspection works have been exposed to many occupational hazards including noise, particulate matter, and volatile organic substances. Noise-induced hearing loss(NIHL) is one of the leading health hazards among Korean workers. The aim of this study is to evaluate the noise levels in several car inspection shops by introducing the evaluation methods of KMOEL/OSHA and ACGIH. Six sites in central area of Korea were selected to monitor the noise levels of workers by personal and area sampling methods for two consecutive days in spring, summer, fall and winter seasons. Dosimeters have been used for this noise monitoring program. Obtained noise levels by the evaluation method according to KMOEL/OSHA are the range of 50.2~88.2 dB(A), these are lower than KOEL/OSHA standards level of 90 dB(A). But highest noise by ACGIH's evaluation methodology is recorded 92.3 dB(A) and is greater than NIHL standard level of 85 dB(A). So that many workers may be exposed to the dangerous noise environment. The higher the car inspection loads daily, the higher the noise levels in the sites. Seasonal fluctuation of noise levels at the process might give monitoring results with high variations. Area noise levels showed higher than those of personal sampling, which illustrate some high noise spots in the car inspection areas.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.87-88
• /
• 2022

For an earthquake-safe urban environment, the Republic of Korea conducts seismic performance evaluation in accordance with laws and guidelines to assign safety ratings and implement necessary management measures such as repairs and reinforcements. In the seismic performance evaluation result, structures lacking in preparation for earthquakes are prioritized and classified into measures such as repair, reinforcement, or careful observation to respond to physical risks such as earthquakes. Such repair and reinforcement work is not a one-time thing, but it is necessary to further enhance the effect through continuous follow-up observation. In this study, the location of the vertical and horizontal displacement measuring part of the construction part is displayed so that the post-construction status of the reinforcement construction part can be visually checked by identifying the problems in the process of post-monitoring in 2022 for the maintenance and reinforcement work of local governments' public facilities carried out in 2021. We propose a plan to institutionalize the installation of, inspection tools, and crack gauges at certain locations in the construction department, and to have facility managers periodically inspect and manage them with a smartphone program or the 'Facility Autonomous Safety Inspection' app.

• 기술사
• /
• 제15권1호
• /
• pp.46-50
• /
• 1982

Following rapid industrial development and urbanization in Korea, there is a need for the Government to implement effective control of pollution and to undertake specific schemes in areas where pollution of the environment is severe. In response to this need, Government of Korea prepare Han River Basin Environmental Master Plan Project for water, air, solid waste to cover environmental protection of the Han River Basin. The Project area is approximately 27,000 sq. Km extending over Seoul, Kyunggi, Kwangwon, Chungbuk Province. The total population of Master Plan Project area is approximately 11.6 million, or one-third of the total population of Korea. There are about 8,000 industries, including those located in 16 industrial complexes, in the project area. The scope of work and terms of reference are the following: (1) A Summary of existing land use and forecasts for changes in land use by the year 2,000. (2) Emission inventories for air, waste water, and solid wastes. (3) Forecasts of future population growth patterns and pollution loadings. (4) Identification of specific projects needs to reduce pollution levels and satisfy the environmental quality standards. (5) A Program of enforcement to include (i) self monitoring, and (ii) governmental inspections and surveillance. (6) A program for quality improvement and quality assurance of environmental measurements. (7) Reports summarizing all data collected analyzed during the study. (8) Conceptual design and feasibility studies, including cost estimates, for needed pollution control projects. (9) A financial plan for future detailed design and construction of public facilities, for financial incentives to industry, and for user charges for industrial use of public treatment of disposal works.

• 한국직업건강간호학회지
• /
• 제22권4호
• /
• pp.267-274
• /
• 2013

Purpose: This study was to assess the prevalence of workplace bullying and the relationship workplace bullying to self-esteem and turnover intention among clinical nurses. Methods: The subjects were 223 clinical nurses at 3 small and medium-sized hospitals in K and B cities. The data were collected from February 1st throughout 28th, 2013. The collected data were analyzed using the SAS program through the frequency, percentage, mean, and Pearson's correlation coefficients. Results: The rate of self-reported bullying in the nursing workplace was 24.6% of respondents. There was a negative correlation between workplace bullying and self-esteem (r=-.39, p<.001). Also there was a positive correlation between workplace bullying and turnover intention (r=.14, p=.031). Conclusion: Prevalence of self-reported bullying is high among small and medium-sized hospitals and is clearly associated with lower levels of self-esteem and higher levels of turnover intention. Therefore, an organizational nursing management program as a monitoring regularly the psychosocial work environment and policies and procedures to prevent and manage workplace bullying is strongly recommended for the promotion of self-esteem and reducing the nurse's intention to leave the organization.

• 대기
• /
• 제17권4호
• /
• pp.339-348
• /
• 2007

Global Environment Laboratory at Yonsei University in Seoul ($37.57^{\circ}N$, $126.95^{\circ}E$) has carried out the ozone layer monitoring program in the framework of the Global Ozone Observing System of the World Meteorlogical Organization (WMO/GAW/GO3OS Station No. 252) since May of 1984. The daily measurements of total ozone and the vertical distribution of ozone amount have been made with the Dobson Spectrophotometer (No.124) on the roof of the Science Building on Yonsei campus. From 2004 through 2006, major parts of the manual operations are automated in measuring total ozone amount and vertical ozone profile through Umkehr method, and calibrating instrument by standard lamp tests with new hardware and software including step motor, rotary encoder, controller, and visual display. This system takes full advantage of Windows interface and information technology to realize adaptability to the latest Windows PC and flexible data processing system. This automatic system also utilizes card slot of desktop personal computer to control various types of boards in the driving unit for operating Dobson spectrophotometer and testing devices. Thus, by automating most of the manual work both in instrument operation and in data processing, subjective human errors and individual differences are eliminated. It is therefore found that the ozone data quality has been distinctly upgraded after automation of the Dobson instrument.

• 한국학교ㆍ지역보건교육학회지
• /
• 제16권1호
• /
• pp.93-105
• /
• 2015

Objectives: This study is for understanding the perceived job training of the public health promotion program officials and analysis the educational needs in order to serve as the basis for the development of the future educational programs. Methods: To this end, we have developed a survey based on references and consultations with experts. We had explained the purpose and the intent of the survey to nationwide public health directors in advance and an online questionnaire was conducted for health promotion program and service providing personnel; the results from a total of 763 survey respondents were used in the final analysis. Collected data were analyzed through SPSS Win 21.0. Results: The results shows that the tasks of public health promotion personnel are 'business practices,' 'planning and evaluation related work' and so on in order of importance while the duties of service providing personnel are 'counseling,' 'education' and so on. One of the factors affecting field applications of education is 'awareness of the connection between education and career development' which accounts for 33% of explanatory power; the selected six other factors constitute 41.7%. Necessary educational contents for public officials are 'public health service planning,' 'report writing skills' and 'project evaluation methods.' On the other hand, for service providers, the contents are 'counseling methods,' 'development of educational materials,' 'monitoring health status' and so on. Conclusions: In order for trained service personnel to accord with the changed health promotion environment and the demand of local residents, Public Health Promotion officials should increase educational opportunities based on the competencies for each job, provide continuous learning opportunities and information even after the training, and finally, create a system that can link to career development.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.945-950
• /
• 2007

The stormwater runoff from paved area are highly polluted because of particulate materials as well as metals from various vehicular activities. The Division of Road Maintenance in Ministry of Construction and Transportation was recently developed the Guidelines of Environment-kindly Road Maintenance. It is actually requiring the BMP construction to control the nonpoint source pollution as based on the TMDL program. This research is carried out in order to define the characteristics of stormwater runoff from the toll-gate of highways since 2006, which is actually one of the main pollutant sources of paved areas. This monitoring is the first phase work for establishing the treatment facilities in the toll-gates. The one of the main characteristics from toll-gate runoff is the first flush phenomenon containing lots of sediments and metal compounds at the beginning of a storm event. Usually it is used to determine the size of treatment facilities and to calculate the reduced pollutant mass in the facility. The research results shows that the mean EMC vaules for heavy metals are determined to $274.3{\mu}g/L$ for Cd, $1,273.4{\mu}g/L$ for Cr, $1,822.0{\mu}g/L$ for Cu, $6,504.9{\mu}g/L$ for Fe, $14,930.3{\mu}g/L$ for Pb, and $714.1{\mu}g/L$ for Zn. Also the metal mass loadings from the toll-gates are calculated using EMC, watershed area and storm duration.