• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.89-92
• /
• 2004

For improving solar efficiencies, down conversion of high-energy photons to visible lights is discussed. The losses due to thermalization of charge carriers generated by the absorption of high-energy photons, can largely be reduced in a solar cell if more than one electron-hole pair can be generated per incident photon. The solar cell was constructed of dye-sensitized anatase-based TiO$_2$, approximately 30nm particle size, 6$\mu\textrm{m}$thickness, and 6${\times}$6$\textrm{mm}^2$ active area, Pt counter electrode and I$_3$$\^$-/I$_2$$\^$-/ electrolyte. After correction for losses due to light reflection and absorption by the conducting glass, the conversion of photons to electric current is practically quantitative in the plateau region of the curves. The incident photon to current conversion efficiency(IPCE) of N3 used as a dye in this work is about 80% at around 590nm and 610nm which is the emission spectrum of Eu doped LGF. The Eu doped LGF powder was prepared by conventional ceramic process, and used as a down converter for DSC after spin coated on the slide glass and fired.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.323-328
• /
• 2004

Down-conversion of Eu$^{3+}$ doped LiGdF$_4$ (LGF) for increasing the cell efficiency on dye-sensitized Ti $O_2$ solar cells has been studied. The dye sensitized solar cell (DSC) consisting of mesoporous Ti $O_2$ electrode deposited on transparent substrate, an electrolyte containing I$^{[-10]}$ /I$_3$$^{[-10]}$ redox couple, and Pt counter electrode is a promising alternative to the inorganic solar cell. The structure of DSC is basically a sandwich type, viz., FTO glass/Ru-red dye-absorbed Ti $O_2$/iodine electrolyte/sputtered Pt/FTO glass. The cell without down converter had open circuit potential of approximately 0.66 Volt, the short circuit photocurrent density of 1.632 mA/$\textrm{cm}^2$, and fill factor of about 50 ％ at the excitation wavelength of 550 nm. In addition, 5.6 mW/$\textrm{cm}^2$ incident light intensity beam was used as a light source. From this result, the calculated monochromatic efficiency at the wavelength of 550 nm of this cell was about 9.62 ％. The incident photon to current conversion efficiency (IPCE) of N3 used as a dye in this work is about 80 ％ at around 590 nm and 610 nm, which is the emission spectrum of Eu$^{3+}$ doped LGF, results in efficiency increasing of DSC.C.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.1
• /
• pp.177-202
• /
• 2015

This research was conducted to evaluate whether knowledge and information resources produced in four educational institutions function as a knowledge management system in the institutions, and to suggest a proposed plan for the foundation of the national knowledge management system. Knowledge and information resources available on the institutes' websites were classified as 'knowledge and information resources of result', 'knowledge and information resources of process', and 'knowledge and information resources of communication'. The application of metadata and the configuration of the search system were examined by content analysis method. From the result, 8 ways to improve the management of knowledge and information resources have been found; the development of standardized metadata and classification scheme, high recognition that the website is a counter for external distribution of knowledge and information resources, various searching skills and the provision of knowledge maps available, provision of linked information for original information acquisition, awareness of the agency managers and homepage managers to the homepages as knowledge management systems, segmentation of appropriate data size unit in a mobile environment work, an organic linkage function of the internal electronic approval system and the homepage have been proposed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.11-23
• /
• 2004

It is easy to access to the infinity information and programs, but it gives rise to the side effect. There are many side effects(ex. Hacking, Cracking, expose the personal information, etc). Nowadays, the computer virus raise the serious problems. The making program called Vaccine is work out a count measure. The Anti-Virus programs install on the client side computer and upgrade by downloading on the server's signature, the latest date, the program bound both of them is shown, but these programs have the defect that they have no remote control and no signature update because user's unconcern, This paper reported the research of existing virus infecting technology and the development of Web based Anti-Virus Scanner using the remote control on the internet server. Through this paper, I want to set up the counter measure for new virus easily, and to make more fast the vaccine for virus.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.131-136
• /
• 2006

In constructing projects, there exist various kinds of work interferences, which cause a delay of the outset and completion of planned schedule because of some attributions, such as variability, uncertainty and complexity. and so schedule delay has been treated as a natural phenomenon. To reduce or prevent the schedule delay, a constant confirmation of schedule delay and a preparation of counter plans for finding out the cause structure of schedule delay should have been done. However, all this time the research has been mostly done on the calculation method or claim cases of schedule delay. Moreover, the analysis method did not consider the trait, which cause the schedule delay, in constructing projects. This paper restricts the range of the cause analysis of schedule delay to the field of site management in the projects and divides the cause structure of schedule delay into the cause objects and cause attributes of schedule delay according to the input elements. The system of classifying causes of schedule delay is examined by interviews with experts and questionnaire. Additionally, this paper analyzes the attributes of cause attributes and cause subjects and presents the analysis method and procedure of schedule delay with the application of VSM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.1034-1041
• /
• 2013

Liquidated Damages is damages that have to be paid when a debtor could usually work off that which they owe, but didn't due to causes imputable. However, currently the Defense Acquisition Program Administration contracts with domestic businesses in case of delay of implementation occurs; they have to pay damages of deferment unlimitedly as a penalty concept, not in compensation about delay. With this in account, conflicts between the two continuesly happen. DAPA wastes administration and counter business costs increasingly burdening their budget. Defense and military procurement need to revise the compensation of deferment system. This paper analyzes the problems about that system, which is applied to domestic business, and also compares it with that of industrialized countries and suggests measures of set price caps in compensation of the deferment system.

• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.7-18
• /
• 2007

This research intended to show a reasonable way to improve working conditions of fire officers in Korea. It shows that fire officers have dignity of their social roles even though they have the unfairness in a work time, rewards, promotions and opportunities of overseas training compared with those of other government officers. The unfairness needs to be solved. In addition, there are more demands in fire fighters, but part of a regional government system already composed of 64.06% of fire officers, which means, there are too many fire fighters in one regional government. Therefore, it is difficult to employ more fire fighters. This is one of barriers to prevent from improvement of the working conditions. To improve the working conditions and to overcome the barriers, there are important solutions to counter the problems. Those are application of alternative policies and systems. Compared with the employment system and workload of fire officers in USA, Japan and other advanced countries, it is necessary to introduce alternative policies which include operation of partial three-shift system, expansion of oversees training, expansion of rotational-off system and improvement of employees' welfare policies.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.319-328
• /
• 2006

This paper presents a method for analysis of the mechanical behavior of a crankshaft in a four-cylinder internal combustion engine. The purpose of the analysis was to study the characteristics of the shaft in which the pin and arm parts were assumed to have a uniform section in order to simplify the modal analysis. The results of natural frequency transfer function and mode shape were compared with those obtained by experimental work. The results obtained from the comparison showed a good agreement with each other and consequently verified the analysis model. Furthermore, a prediction of crankshaft characteristics under the firing condition, by using the model, was performed. This study describes a new method for analyzing the dynamic behavior of crankshaft vibrations in the frequency domain based on the initial firing stages. The new method used RMS values to calculate the energy at each bearing journal and counter weight shape modification under the operating conditions.

• Asian review of World Histories
• /
• v.1 no.1
• /
• pp.5-44
• /
• 2013

This essay offers a historically based critique of the idea of "alternative modernities" that has acquired popularity in scholarly discussions over the last two decades. While significant in challenging Euro/American-centered conceptualizations of modernity, the idea of "alternative modernities" (or its twin, "multiple modernities") is open to criticism in the sense in which it has acquired currency in academic and political circles. The historical experience of Asian societies suggests that the search for "alternatives" long has been a feature of responses to the challenges of Euromodernity. But whereas "alternative" was conceived earlier in systemic terms, in its most recent version since the 1980s cultural difference has become its most important marker. Adding the adjective "alternative" to modernity has important counter-hegemonic cultural implications, calling for a new understanding of modernity. It also obscures in its fetishization of difference the entrapment of most of the "alternatives" claimed--products of the reconfigurations of global power--within the hegemonic spatial, temporal and developmentalist limits of the modernity they aspire to transcend. Culturally conceived notions of alternatives ignore the common structural context of a globalized capitalism which generates but also sets limits to difference. The seeming obsession with cultural difference, a defining feature of contemporary global modernity, distracts attention from urgent structural questions of social inequality and political injustice that have been globalized with the globalization of the regime of neoliberal capitalism. Interestingly, "the cultural turn" in the problematic of modernity since the 1980s has accompanied this turn in the global political economy during the same period. To be convincing in their claims to "alterity", arguments for "alternative modernities" need to re-articulate issues of cultural difference to their structural context of global capitalism. The goal of the discussion is to work out the implications of these political issues for "revisioning" the history and historiography of modernity.