• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.74-80
• /
• 1999

Work roll wear in the cold rolling of mild steel strip is strongly affected by rolling materials, rolling conditions such as roll arrangement in the cold rolling mill and lubrication. The tests were performed to find the effects of roll arrangement n the cold rolling mill on the work roll wear under the same lubricating conditions. The obtained results are as follows:If the distance of cold rolling is about 60km, the surface roughness of its was reduced by half(Ra 0.49${\mu}{\textrm}{m}$) and Pc(peak count) also was decreased to 60 ea/cm.It is easier for CC(Continuous casting) to make a slip on rolling than IC(Ingot casting). It is due to surface mirror in which first residual product appears and iron powder included Al2O3 is sticked. Because bending degree of 4Hi-rolling mill is higher than 6Hi-rolling mill, the first surface mirror was occurred to its center-point which is loaded strongly. 6Hi-rolling mill shape-controlled by intermediate roll doesn't need the initial crown to work roll. Therefore, fatigue and wear would appear a little bit.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.449-462
• /
• 2020

This work aims to study effects of the crack and the surface energy on the free longitudinal vibration of axially functionally graded nanorods. The surface energy parameters considered are the surface stress, the surface density, and the surface Lamé constants. The cracked nanorod is modelled by dividing it into two parts connected by a linear spring in which its stiffness is related to the crack severity. The surface and bulk material properties are considered to vary in the length direction according to the power law distribution. Hamilton's principle is implemented to derive the governing equation of motion and boundary conditions. Considering the surface stress causes that the derived governing equation of motion becomes non-homogeneous while this was not the case in works that only the surface density and the surface Lamé constants were considered. To extract the frequencies of nanorod, firstly the non-homogeneous governing equation is converted to a homogeneous one using an appropriate change of variable, and then for clamped-clamped and clamped-free boundary conditions the governing equation is solved using the harmonic differential quadrature method. Since the present work considers effects of all the surface energy parameters, it can be claimed that this is a comprehensive work in this regard.

• 한국전문물리치료학회지
• /
• 제14권2호
• /
• pp.85-90
• /
• 2007

In many manufacturing occupations, industrial workers reported foot or lower leg problems such as discomfort, pain or orthopedic deformities. This study investigated the effects of two different working conditions upon assembly worker's perception of discomfort and foot pain associated with various body parts. Twenty-three male volunteers performed work in the factory. Ergonomic intervention has been to modify the flooring in an attempt to alleviate the problems associated with constrained standing and walking work. The worker's standing conditions consisted of standing on a hard floor while wearing shoe insoles. Questions were asked regarding body discomfort and foot pain. Significant differences in body discomfort and foot pain were found when comparing the overall effects of wearing shoe insoles on a hard floor (p<.05). This investigation indicated that shoe insoles reduced body discomfort and foot pain (p<.05).

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1335-1342
• /
• 1988

본 연구에서는 일반적인 구조물에 가장 많이 사용되는 연강박판재(SM12C)가 반복인장하중을 받았을 경우, 즉 이 재료가 프리응력과 프리변형을 받았을 때 시간의 경과에 따르는 경도, 항복강도 및 가공경화지수의 변화를 살펴보았다. 이와 같은 실 험을 통하여 재료가 서서히 안정화되어가는 상태를 왁인하였으며 이를 기초로 하여 레 지듀얼강도(residual strength)와 피로크랙진전속도의 거동을 체계적으로 구명하여 이 연강박판재의 구조물의 안전사용에 기여하도록 하는데 그 목적을 두었다. 아울러 프 리응력 및 프리변형을 받았을 때의 연강박판재의 기계적 성질의 변화를 Taylor의 가공 경화이론에 대응시켜 검토하였다.

• 한국보건간호학회지
• /
• 제30권3호
• /
• pp.495-511
• /
• 2016

Purpose: The present study was performed to describe the prevalence of various types of smoking statuses and to identify factors associated with different types among Korean wageworkers. Methods: The prevalence of hardcore smoking, daily smoking, and intermittent smoking was assessed in 2,126 wage workers from the Sixth Korea National Health and Nutrition Examination Survey. The associations of these three types of smoking statuses with sociodemographic characteristics, health conditions, and occupation-related characteristics were also examined in a multinomial logistic regression. Results: In men, the prevalence of hardcore smoking and daily smoking were 11.4% and 30.2%, respectively; and in women, the daily smoking prevalence was 5.6%. The education level was strongly associated with men's hardcore smoking and women's daily smoking. The household income and marital status were associated with women's daily smoking. Among occupation-related characteristics, the regularity of work and night work were associated with men's intermittent smoking. Night work was also associated with women's daily smoking. Employment condition was associated with women's intermittent smoking. Conclusion: The socioeconomic status and health conditions, compared with occupation-related factors, were found to have more influence on smoking. Therefore, antismoking programs that focus on individual characteristics should be developed for Korean wageworkers.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.327-328
• /
• 2017

Despite provision of drinking water as the most common method of occupational heat stress prevention, there remains confusion in hydration messaging to workers. During work site interactions in a hot and humid climate, workers commonly report being informed to consume tepid fluids to accelerate rehydration. When questioned on the evidence supporting such advice, workers typically cite that fluid absorption is delayed by ingestion of chilled beverages. Presumably, delayed absorption would be a product of fluid delivery from the gut to the intestines, otherwise known as gastric emptying. Regulation of gastric emptying is multifactorial, with gastric volume and beverage energy density the primary factors. If gastric emptying is temperature dependent, the impact of cooling is modest in both magnitude and duration (${\leq}5$ minutes) due to the warming of fluids upon ingestion, particularly where workers have elevated core temperature. Given that chilled beverages are most preferred by workers, and result in greater consumption than warm fluids during and following physical activity, the resultant increased consumption of chilled fluids would promote gastric emptying through superior gastric volume. Hence, advising workers to avoid cool/cold fluids during rehydration appears to be a misinterpretation of the research. More appropriate messaging to workers would include the thermal benefits of cool/cold fluid consumption in hot and humid conditions, thereby promoting autonomy to trial chilled beverages and determine personal preference. In doing so, temperature-based palatability would be maximized and increase the likelihood of workers maintaining or restoring hydration status during and after their work shift.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.616-623
• /
• 2022

Some regions and states, such as Wyoming, have harsh weather conditions, forcing most transportation projects to be completed under tight schedules. However, construction projects are not only delayed by weather conditions, but also delayed by other factors such as contractor's competency, resource availability, coordination issues, and safety. Also, the construction method, geographical location of the projects, and inability to follow baseline schedules accurately due to the contractor's resource allocation are also reasons for the delay. This paper discusses the main reasons for the delay in the public transportation projects based on Daily Work Reports (DWRs) from five different transportation projects of the last three years in Wyoming. This paper focuses on the inconsistencies of the contractor's schedules to complete the project according to the baseline schedule. First, the authors collected DWRs and baseline schedules from the Wyoming Department of Transportation (WYDOT). Second, the DWR data are compared against the baseline schedules to determine the reasons for delaying their significance. Finally, the paper presents the recommendations to mitigate the effects of delays on public transportation projects as well as to improve the documentation process of DWR data.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.417-433
• /
• 2010

Purpose: This study evaluated the manpower planning of dental technicians. Methods: Methods : Survey was conducted regarding subject's general characteristics, characteristics of dental technician's occupational view and working conditions, and reason to enter into branches of the public health enter. The survey sample consisted of 323 dental technicians (221 male/ 102 female). Survey was conducted for one month from August 1 to September 1 in 2010. Following results were obtained. Results: 1. Regarding general characteristics of the subjects, there was a slight male predilection with 68.4%. Subjects in their 40s occupied the highest proportion of 32.2%. Majority of subjects worked in the big cities (71.5%). Favored working places were dental laboratory (57.6%) and dental hospital or dental clinic (19.5%). Although no position is available in the public sector such as public health center or health care civil servant, 9.3% preferred working in the public health center. Public sector is more favored than 2-year technical colleges or dental supply and equipment companies. In respect to education, 57% of the subjects graduated college. 67.8% were married. Subjects who specialize in the porcelain or all-ceramic were 57.9%. With regard to current position, head of the dental laboratory was most common. 2. Following occupation characteristics were found. Economic reason took the highest proportion when deciding their occupation (39.9%) followed by gaining social experience (36.5%). Majority of the subjects (76.5%) wanted to work as dental technicians until their retirement. 71.5% pursuit to become a manager of the dental laboratory. 76.1% agreed on opening a dental technician position in the public health center. Regarding an authority to lead developing the dental technician position in the public sector, majority of the subject chose ministry of health and welfare (35.6%) and Korean dental technologist association (34.7%). Employment (average, 30%) and turnover rate (average, 36.5%) of dental technology college graduates ranged from 40% to 60%. Most important factors for the employment were practical experience (41.2%) and competency (34.4%). With regard to job satisfaction, so-so as 46.7% and satisfactory was 42.7% 3. In respect to the reason for opening a position in the public health center, 'It is needed to continue denture rogram for elderly patients' obtained the highest score (4.14 point). 'Institutional devices are required to open a position for dental technicians as a public healthcare provider' received high score (4.11 point). 4. Concerning the working conditions, 'professional knowledge is required' received the highest score (4.23) followed by 'too short maternity and parental leave' (4.21). 5. Relationship between general characteristics of the subjects and favor of working in the public health center was investigated. Significant differences were found according to the current and favored working area, favored occupation, education level, marital status, and specialty. Working in the public health center was favored by following subjects: working in mid- or small-sized cities (4.16 point, p<0.05); PhD degree-holder (4.59 point, p<0.01). 6. Among general characteristics of the subjects, significant difference of working conditions was found in the following factors: gender; working areas; favored working areas; favored working positions, and education level. Majority of subjects favored working in big cities and currently work in big cities although satisfaction was comparatively low (3.75 score). 7. Future plan to work in public health center was evaluated according to occupational characteristics. Subject's intention to work in the public healthcare center was significantly affected by opening of dental technician position, leading authority, average turnover rate, and factors affecting employment. Working in the public health care center was favored by the following subjects: Dental technicians who actively supported opening of the dental technician position (4.34 point, p<0.001); subjects who thought the Korean dental technologist association is responsible for the opening of positions in the public sector (4.26 point, p<0.001); and subjects who thought that attitude and character are important for the employment (p<0.001). 8. Concerning difference of working conditions according to the occupational characteristics, significant difference was demonstrated by factors such as a reason to choose to be a dental technician, work plan, pursuing position, responsible authority, average employment rate, and job satisfaction. High standard of working conditions was required in subjects who selected to be a dental technician for the leisure time after work (s.05 point, p<0.01), who planted to work until their marriage (4.25 point, p<0.001), and who pursuit to be a manager (3.98, p<0.05). 9. In respect to influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.068 and age affected the working condition with significant difference according to the pvalue. 10. Regarding influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.335 and work plan, opening of dental technician position in the public sector, and responsible authority had significant influence over the subject's intention to work in the public health center according to the p-value. 11. With regard to the influence of general characteristics on the advancement to public health centers, the coefficient of determination (R2) was 0.091 and reason to choose to be a dental technician, work plan, and responsible authority significantly affected subject's working conditions. Conclusion: Korean society is becoming a super-aged society according to several statistics. As aged population is rapidly increasing, national health insurance plans to cover denture for senior citizen over 75 years old from 2012. Therefore, dental technicians are urgently needed in the public health centers all over the nation. Many subjects in this study planed to work until their retirement and recognized dental technician's expertise. Ministry of health and welfare and Korean dental technologist association should co-operate each other to prepare foundation and institutional devices for dental technicians to advance into the public health center. This will improve oral health of the population. This study showed urgency of medical facilities and services which meets increasing number of aged population and welfare of the population.

• 한국보육지원학회지
• /
• 제9권2호
• /
• pp.23-46
• /
• 2013

본 연구는 초임 보육교사의 적응에 도움을 주기 위한 기초 정보를 제공할 목적으로 수행되었다. 초임 보육교사 5명을 대상으로 심층인터뷰와 교사에 의한 메모일기, 저널, 보육일지등의 자료를 수집하였다. 연구결과, 초임 보육교사의 경험은 어려운 인간관계, 난감한 업무, 잦은 실수의 긴장, 받았거나 받기를 원하는 도움, 경험을 통한 현장 이해와 자기 성찰, 교사로서 보람이 느껴진 순간으로 분류할 수 있었다. 근거이론 접근법으로 조직 적응과정에 대한 이론적 모델을 구성하였다. 초임 보육교사의 적응과정은 부정적인 정서 반응의 현상을 중심으로 인과적 조건, 맥락과 중재적 조건, 부정적 정서를 다루는 전략과 그 결과로 설명할 수 있다. 인과적 조건은 업무 실수와 인간관계의 미숙함이다. 맥락은 학급 유아의 연령, 근무시간과 공간, 업무의 양과 낯섦, 구성원의 성격 특성 그리고 학부모와의 잦은 만남으로 구성된다. 중재적 조건은 초임교사 안내프로그램, 구성원의 도움과 지지, 보상, 교사의 개인성격 특성으로 구성된다. 초임 보육교사는 부정적 정서를 다루기 위해 잊어버리기, 가족이나 친구와 나누기, 긍정적 정서로 전환하도록 노력하기의 세 가지 전략을 사용한다. 전략 사용의 결과는 성장하기, 살아가기, 이직과 전직 고려로 구성된다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 춘계학술대회 논문집
• /
• pp.29-35
• /
• 2003

Recently, WRMSD(Work-Related Musculoskeletal Disorders) related to simple and repetitious works has been become big issue and has been studying actively by many korean researchers. However, it is that the researches has been depended on foreign ones because the basic data in each field is short in Korea. In this study, we tried to search the actual conditions and factors on WRMSD of pressing workers. In addition, we tried to search the actual conditions and factors on WRMSD of pressing workers. In addition we examined how the contents of works and postures of workers affected at the disease. Accordingly, these research data will be used for planning the preventive program on WRMSD effectively and implement its program.