• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.195-202
• /
• 2011

The purpose of this study is to estimate the capacity of two-lane freeway work zone blocking one lane using traffic flow models of each vehicle-type. Firstly, three traffic flow models of three different vehicle-types were developed using the data collected from each at the beginning and the ending point of the work zone. For each model, the maximum flow rate of three vehicle-types were calculated respectively. Maximum flow rate at the work zone was recalculated using passenger car equivalent value and percentage of vehicle-type. Secondly, traffic flow model using passenger car equivalent volume data was developed using the data collected from each at the beginning and the ending point of the work zone. Maximum flow rate for the work zone was calculated along. Two values of maximum flow rates through the work zone were compared and evaluated as the capacity of the work zone. This study found that the maximum flow rate of the work zone at the beginning point was less than that at the ending point because of impedance such as lane changing behaviors before entering the work zone. The capacity of two-lane freeway work zone blocking one lane was estimated 1,800pcphpl.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.3
• /
• pp.37-46
• /
• 2001

The objective of this study was to investigate the physical work capacity and rest allowance for Korean males and females. Eleven males and 13 females participated in the study as subjects. An ergometer exercise test and a treadmill exercise test were conducted to measure oxygen consumption rates. The PWC values of Korean males and females were 2605.62ml/min and 1853.01ml/min in the cycle ergometer test, respectively, and 2872.10ml/min and 2057.91ml/min in the treadmill test. The PWC values of Korean females were about 70% of Korean males. The PWC values of Korean females were74.36%-78.79% of western males in the treadmill test. and 88.66%-89.32% of western males in the ergometer test. The PWC values of Korean females were 81.34%-82.98% of western females in the treadmill test, and 87.11% of western femaleles in the ergometer test. And, the results of this study showed that the rest allowance should be determined separately for male and female because of the difference in physical work capacity.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.2
• /
• pp.56-62
• /
• 2018

Many researchers have studied on the precipitation control after solution treatment to improve the damping capacity without decreasing the strength. However, studies on the damping capacity and microstructure changes after deformation in the solid solution strengthening alloys were inadequate, such as the Al-Zn series magnesium alloys. Therefore, in order to investigate the effect of annealing condition on microstructure change and damping a capacity of AZ61 magnesium alloy. In this study, it was confirmed that the microstructure changes affect the damping capacity and hardness when annealed AZ61 alloy. AZ61 magnesium alloy was rolled at $400^{\circ}C$ with rolling reduction of 30%. These specimens were annealed at $350^{\circ}C$ to $450^{\circ}C$ for 30-180 minutes. After annealing, microstructure was observed by using optical microscopy, and damping capacity was measured by using internal friction measurement machine. Hardness was measured by Vickers hardness tester under a condition of 0.3 N. In this study, static recrystallization was observed regardless of the annealing conditions. In addition, uniform equiaxed grain structure was developed by annealing treatment. Hardness is decreased with increasing grain size. This is associated with Hall-Petch equation and static recrystallization. In case of damping capacity, bigger grain size show the larger damping capacity.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.269-278
• /
• 2011

This study aims at setting up productive capacity which can be usefully utilized for work management of apparel manufacturers. So as to achieve this goal, an apparel manufacturing company which has been operated by miniline system in Seoul was selected. Standard time and man-hour were calculated to create the accurate productive capacity by observing and measuring a work flow included cutting, sewing and finishing processes. And the result is as following. The standard time for each process was presented as cutting process 47004.5s, sewing process 671050.5s and finishing process 22426.3s. And 15284.4ms was computed as total procession man-hour per day of the manufacturer which is organized of 16 people. Also, the procession man-hour for each process was revealed as cutting process 396.7ms(2.6%), sewing process 14509.3ms(94.9%) and finishing process 378.5ms(2.5%). +Surplus was found in the productivity for each process included the cutting process(outshell, lining and seam process), the sewing process(preparation and arrangement process) and the finishing process. But, additional man-hour 52436.18ms was required because the productive capacity was calculated as -surplus(-13.9%) in the sewing process(part and assembly process). Therefore, a work schedule was planned based on the previous result. However, loading can be ideal when a capacity and a load become '0'. The object company should find the way to reduce allowance(26.25%) of the sewing process through reconstruction of consciousness and improvement in functions with analyzing works of operators. Also, they need to consider an additional supplement of the personnel.

• Journal of Hospice and Palliative Care
• /
• v.25 no.2
• /
• pp.66-75
• /
• 2022

Purpose: The purpose of this study was to examine person-centered care, nursing professionalism, the nursing work environment, and empathy capacity among hospice ward nurses and to identify the factors affecting person-centered care. Methods: Data were collected using a self-report questionnaire completed by 120 nurses at 30 inpatient hospice institutions in South Korea from August 24, 2020 to September 8, 2020. The independent t-test, one-way analysis of variance, and Pearson correlation analysis were conducted using SPSS version 26.0. Results: The scores were 3.76±0.45 for person-centered care, 3.58±0.47 for nursing professionalism, 3.24±0.57 for the nursing work environment, and 4.00±0.46 for empathy capacity. There were positive correlations between the variables. Factors that influenced the person-centered care of hospice nurses were being a manager (β=0.20, P=0.002), high nursing professionalism (β=0.20, P=0.012), a better nursing work environment (β=0.15, P=0.033), and high empathy capacity (β=0.51, P<0.001). The explanatory power was 65.3%. Conclusion: To reinforce the person-centered care competency of hospice nurses, it is necessary to improve nursing professionalism, the nursing work environment, and empathy competency. Opportunities for nurses to practice independently must be expanded for nurses to develop nursing professionalism. Sufficient nursing personnel and material resources must be provided to nurses to cultivate a positive work environment. Empathy should be improved by implementing integrated education programs that include nursing practice situations.

• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.79-95
• /
• 2013

Suction anchors are widely adopted in mooring systems. However there are still challenges in predicting the failure mode and ultimate pullout capacity of the anchor. Previously published methods for predicting the inclined pullout capacity of suction anchors are mainly based on experimental data or the FEM analysis. In the present work, an analytical method that is capable of predicting the failure mode and ultimate pullout capacity of the suction anchor in clay under inclined loading is developed. This method is based on a rational mechanical model for suction anchors and the knowledge of the mechanism that the anchor fails in seabed soils. In order to examine the analytical model, the failure angle and pullout capacity of suction anchors from FEM simulation, numerical solution and laboratory tests in uniform and linear cohesive soils are employed to compare with the theoretical predictions and the agreement is satisfactory. An analytical method that can evaluate the optimal position of the attachment point is also proposed in the present study. The present work proves that the failure mode and pullout capacity of suction anchors can be reasonably determined by the developed analytical method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.293-301
• /
• 2018

This study examined the effects of a multifaceted intervention program on the psychological condition, empowerment, work readiness, and functional capacity for job performance of industrially injured workers. Twelve injured workers in C hospital were included in this study. The subjects participated in a social rehabilitation program 2 hours a day, twice a week, for 8 weeks in total, as well as a work hardening program 3 to 4 hours a day, 5 times a week, for 8 weeks in total. The study was conducted from March to September, 2017. A multi-dimensional psychological examination, empowerment scale, work readiness interview and functional capacity evaluation were conducted and the test scores compared before and after the program with the Wilcoxon signed rank test. In the multi-dimensional psychological examination, there were significant differences in the levels of anxiety, depression, lack of social support, and somatization symptoms (p<.05) except anger. The participants also showed significant differences in the empowerment scale, work readiness scale, and functional capacity evaluation. This study suggests that a multifaceted intervention program can be effective in improving the psychologic condition, empowerment, work readiness, and functional capacity of industrially injured workers and, in turn, may improve their rate of returning to work.

• Journal of Nutrition and Health
• /
• v.30 no.8
• /
• pp.904-910
• /
• 1997

Evaluation of soy milk as an iron-rich milk substitute was conducted by feeding commercial soy milk , cow milk and mixed formula(soy and cow milk) to Wistar rats for 8 weeks. Body weight gains were significantly lower in the soy milk and mixed formula groups. Hematocrit, serum iron concentration and TIBC (total iron binding capacity) were measured to determine the iron status of the rats. In these respects, the iron status of the soy milk group was normal. Both serum iron concentration and TIBC as well as hematocrit were abnormal in the cow milk group , which is indictive of severe iron deficiency . Although hematocrit was normal in the mixed formula group, serum iron concentration was lightly low. The work capacities of each group were correlated with serum iron concentration and tIBC rather than hematocrit. The running distance of the soy milk group was about 10 -fold longer than that of the cow milk group. Soy milk may be considered an iron- rich substitute for cow milk due to its higher iron content and bioavailability.

• Journal of Ginseng Research
• /
• v.37 no.2
• /
• pp.144-166
• /
• 2013

Actoprotectors are preparations that increase the mental performance and enhance body stability against physical loads without increasing oxygen consumption. Actoprotectors are regarded as a subclass of adaptogens that hold a significant capacity to increase physical performance. The focus of this article is studying adaptogen herbs of genus Panax (P. ginseng in particular) and their capabilities as actoprotectors. Some animal experiments and human studies about actoprotective properties of genus Panax attest that P. ginseng (administered as an extract) significantly increased the physical and intellectual work capacities, and the data provided suggests that ginseng is a natural source of actoprotectors. Preparations of ginseng can be regarded as potential actoprotectors which give way to further research of its influence on physical and mental work capacity, endurance and restoration after exhaustive physical loads while compared with reference actoprotectors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1062-1066
• /
• 2001

Studies were carried out on forty young bulls of the Hariana breed (around 18 months of age) selected on the basis of their dam's milk yield at the animal farm of CCS HAU, Hisar during the period 1993-1999. Since animals showed variation in capacity to work over prolonged periods, they were subjected to regimes of carting without load and with 8 qtls. of load for three hours. The study revealed that maximum change took place in the pulse rate, followed by respiration rate and rectal temperature. The mean fatigue score for pulling an empty cart ranged between 1.66 to 2.20 after two hours work, and 2.36 to 2.73 after three hours work. For a cart loaded with 8 qtls., the corresponding ranges were 2.90 to 3.36 and 3.40 to 4.10, respectively. These results indicated that the animals under experiment had the capacity to pull moderate load (8 qtls.) for about two hours without showing any serious effect on the ability to recover and soon to work again.