• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.392-409
• /
• 2023

The amount of wood waste from furniture production is increasing. Wood waste is diverse and ranges from wood-splitting residues to leftovers from furniture production. Wood waste occurs in companies, household-based industries, and other forms of business where waste accumulates; therefore, an environmental and ethical policy is needed. The aim of this study was to identify products created using wood waste and describe government regulations related to environmental policies. We analyzed the management of wood waste for use as a new product so that it is useful, does not become waste, and complies with policies related to environmental ethics. A case study design using qualitative methods was used. This research focused on managing wood waste in Jepara's furniture and crafts industry for the 2010-2021 period, using 23 sources from primary, secondary, and other supporting documents. Data were collected through observation or gathering information related to research needs, conducting closed-door interviews with research sources, documenting data to strengthen research findings, and using online questionnaires to corroborate information related to wood waste management. This article presents wood waste products designed with optimized environmental ethics and awareness of environmental laws in wood-based industries.

• Journal of the Korean Wood Science and Technology
• /
• 제6권1호
• /
• pp.8-14
• /
• 1978

In order to determine the feeding value of t:1e waste wood of Lentinus eddodes, the waste wood was milled and treated with $Ca(OH)_2$ and cellulase, then raw waste wood and the treated waste wood were fed to broiler chicken and Korean native goates. The results obtained were as follows; 1. The chemical composition of the waste wood was c. protein 2.26%. c. fat 2.57%. c. fiber 44.60 and c. ash 5.58%. No differences were detected between the raw waste wood and $Ca(OH)_2$ or cellulase treated waste wood in chemical composition. 2. In amino acid composition. no cystine and methionine was showed, but trace amount of Vitamin A, $B_1$, and $B_2$, and cholin chloride were detected. 3. Trichoderma viride SANK. No. 16374 was used to decompose the cellulose. 4. In broiler performance, when waste wood meal was subsituted for 5% wheat bran, no adverse effect was showed on weight gain, feed in take and feed efficiency. But $Ca(OH)_2$ and cellulase treated waste wood meal could be subsituted for 8% wheat bran. 5. In Korean native goat performance, feeding waste wood meal subsituted by 50% various bran (25% defatted rice bran and 25% barley bran) had no adverse effect on growth and feed efficiency. 6. Considering the above results, though the waste wood meal could be replaced to part of various bran, there was a bottle-neck to process the waste wood. The waste wood of Lentinus edodes was little feeding value on bed of ruminant.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.80-86
• /
• 2007

In this study we experimented setting time and basic properties as waste wood fiber and sodium silicate substitution rate to reuse waste wood fiber produced in construction field to wood chip board. To do this construction waste woods were crushed with the size less than 10mm, mixed with the rate of 1:2, 2.5, 3, and added sodium silicate with the rate of 0, 5% of cement content. The results are as follows. As the substitution rate of construction waste wood was increased delay of setting time was also increased, and the batch of adding 5% accelerator had a 13~17 hours faster setting time than non accelerator batch. The compressive strength was lower as wood substitution rate was higher, and as the specific gravity was higher, the strength was also higher. As wood substitution rate was higher, heat conductivity was lower, and as specific gravity was higher, heat conductivity also was higher.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.29-38
• /
• 1997

The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.73.1-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods. which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, consolation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2004

Recently. as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust af the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. The present study purposed to analyze the physical and dynamic characteristics of woody cement boards, which were made by modifying water-cement ratio for each wood inclusion rate based on a hardening-accelerator inclusion rate set in previous studies and, based on the findings. to provide basic data about the physical properties of inorganic boards made of waste wood, in order to Produce woody cement boards using waste wood, which has problems in being used in the manufacturing of woody cement boards.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2011

The use of renewable energy sources is becoming increasingly necessary to minimize the problems derived from the global warming impacts caused by the utilization of fossil fuels as well as their limited supply and reservoir. Also, localized heavy rain has occurred in many areas. As a result, suspended wood waste is being inflow into the dam and the problem of waste disposal has occurred. It is a unique renewable and alternative source for the production of energy. The experiment using wood waste (dry weight 25.0g) was conducted for extraction sugars such as xylose, lactose and glucose. For the sugar extraction from wood waste, hydrolysis experiment using wood waste was conducted by two steps. First step was reacted with 72% sulfuric acid (24.0N and 37.5 ml) for 1hr at $30^{\circ}C$ and second step was reacted at $105^{\circ}C$ for one hour after adding 2.45times of hot water. Extracted sugar was used in the experiment of sugar consumption to estimate feasibility of ethanol production using yeast(P. Stipitis and S cerevisiae). As a result, sugar extracted from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). The consumption rate by yeast was S. cerevisiae was faster than that of P. stipitis. It can be confirmed that resource as ethanol production using wood waste was available.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.29-36
• /
• 2009

목재 자원의 부족과 가격 상승에 대항할 수 있는 좋은 대안 중 하나가 목재 부산물이나 폐기물의 재활용이다. 조선 산업에서 얻어지는 목재 폐기물의 경우 기존에는 파쇄 되어 보드류 생산에 주로 사용되어 왔다. 하지만 파쇄를 통한 합판 폐기물의 재활용은 재료의 경제적 가치나 자원의 문제 등을 고려할 때 아쉬움이 많이 남는 처리 방법이다. 본 연구에서는 국내 조선 산업에서 파생되는 목재 폐기물들의 재활용 가능성을 알아보고자 하였다. 국내 조선 산업의 목재 관련 폐기물은 합판 폐기물과 소재 폐기물로 나뉜다. 본 연구를 통해 다음과 같은 결론을 얻을 수 있었다. 1. KS 규격에 따라 합판 폐기물과 합판 적층재의 휨성능을 평가하였다. 2. 합판 폐기물과 합판 적층재의 파괴 모드는 두 종류 모두 simple tension 파괴를 나타내었다. 3. 합판 폐기물과 합판 적층재의 재활용 용도로는 크게 외부 시설용, 내부 시설용 그리고 목조건축 자재로의 용도가 적합하다고 판단되었다. 적정 용도로는 인테리어 재료, 목재 파렛트, 마루판, 사이딩재, 판넬, 야외용 탁자, 데크용 재료 등인 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.135-143
• /
• 2015

본 연구는 반탄화 목분과 정수기 필터용 폐활성탄 분쇄물을 혼합한 혼합물을 연료로 사용하였을 경우의 그 연료적 특성을 평가하고자 하였다. 반탄화 목분은 국산 범용수종인 졸참나무와 소나무를 이용하여 급속으로 목재칩 열가공처리가 가능한 wood roaster를 이용하여 처리하였으며 처리조건은 $200^{\circ}C$에서 각 300 s, 450 s, 600 s를 적용하였다. 이때 폐활성탄과 반탄화 목분의 혼합비율은 중량대비(wt%) 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40, 80 : 20으로 하였으며, 이에 대한 연료적 특성에 평가를 위해 발열량, 원소분석, 회분함량 등을 측정하였다. 그 결과는 다음과 같다. 1. 동일시간, 온도 등의 wood roasting 처리조건에서 소나무가 졸참나무에 비해 탄소함량이 더 높았으며, 이는 낮은 온도와 짧은 시간에 최적 탄화도를 나타냄으로 소나무가 효율적인 반탄화 작업이 가능함을 알 수 있다. 2. 반탄화 목분 및 무처리 목분의 폐활성탄 첨가율이 증가할수록 총발열량 값은 급격히 증가하였고 회분함량 또한 증가하였다. 3. 반탄화 목분과 무처리 목분에 폐활성탄을 혼합한 경우에는 두 조건 모두 첨가율에 따라 총발열량은 증가하지만 무처리 보다는 반탄화 목분 그리고 졸참나무보다는 소나무가 더 높은 총발열량을 나타냈다. 4. 폐활성탄을 목분과 함께 혼합물의 원료로 사용하기 위해서는 $800^{\circ}C$, 4시간 연소조건 이상의 고온 연소조건이 필요하다고 판단된다. 이는 $800^{\circ}C$, 4시간 연소조건에서도 완전연소가 되지 않고 회분상태로 잔류하는 함량이 매우 높기 때문이다. 5. 또한 무처리 목분과 반탄화 목분에 폐활성탄을 혼합한 조건 중 무처리 목분에 폐활성탄을 혼합하는 조건이 총발열량의 증가율이 더 높게 나타났으며, 이러한 현상은 소나무보다는 졸참나무가 더 명확하게 나타났다. 최적 회분함량의 폐활성탄 첨가비율은 소나무 무처리 목분에 총 중량대비 5% 이상, 10% 미만의 조건이며 이는 1급 펠릿에 해당되는 0.7% 미만의 기준을 만족하는 것으로 나타났다.