• Journal of the Korean Wood Science and Technology
• /
• 제28권1호
• /
• pp.65-70
• /
• 2000

에르고스테롤(ergosterol)은 고등균류 균사세포막의 중요한 구성 성분으로 이들의 특징 물질이고, 균의 생장에 중요한 기능을 한다. 그러므로 균사 배양체에서 이 물질의 함량을 분석함으로써 고체상 배지 속에 있는 곰팡이의 생채량을 추정할 수 있다. 표고균사의 액체 배양체와 톱밥 배양체를 가지고 에르고스테롤을 분석한 결과, 이 물질의 함량은 균사체의 중량과 직선적 상관관계가 있으면서(r=0.98), 배양기간, 균주, 배지내 수분함량에 따라 달라졌다. 액체배양체에서 에르고스테롤 농도는 10주간 배양된 것이 0.13%로 20주간 배양된 것의 0.1% 보다 높았다. 톱밥배양체에서 이 물질의 농도는 균주와 수분 함량에 따라 0.015~0.042% 범위였다. 표고균주 산림 4호 배양체에서 에르고스테롤 함량은 균주 목-H나 산림 6호의 것보다 건조배지 g당 $20{\sim}140{\mu}g$ 정도 높았다. 이 화확물질의 함량은 표고균사를 수분율이 125%나 175%인 배지에서 배양하였을때 건조배지 g당 $297{\sim}425{\mu}g$/g 였다. 이 양은 수분율이 125%나 225%인 배지에서의 함량, $148{\sim}286{\mu}g$/g 건조배지, 보다 높은 것이다. 에르고스테롤을 분석함으로써 톱밥이나 원목과 같은 고체배지내에 있는 표고 균사량의 추정이 가능하리라 생각한다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.528-534
• /
• 2013

본 연구는 톱밥과 귤박을 이용하여 혼합보드를 제조하여 기본 물성을 조사하였다. 혼합보드의 귤박 혼합율이 10%에서 40%로 증가함에 따라 흡수율은 94.1%에서 86.5%로, 두께 팽창율은 27.2%에서 18.0%로, 휨강도는 $65.1kgf/cm^2$에서 $39.2kgf/cm^2$로, 경도는 $195.3kgf/cm^2$에서 $180.3kgf/cm^2$로 감소하였다. 혼합보드의 밀도가 $0.4g/cm^3$에서 $0.8g/cm^3$로 증가함에 따라 흡수율은 149.2%에서 58.6%로 감소하였으나, 두께 팽창율은 6.4%에서 17.9%로, 휨강도는 $4.2kgf/cm^2$에서 $96.6kgf/cm^2$로, 경도는 $40.4kgf/cm^2$에서 $196.2kgf/cm^2$로 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2004

Recently. as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust af the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. The present study purposed to analyze the physical and dynamic characteristics of woody cement boards, which were made by modifying water-cement ratio for each wood inclusion rate based on a hardening-accelerator inclusion rate set in previous studies and, based on the findings. to provide basic data about the physical properties of inorganic boards made of waste wood, in order to Produce woody cement boards using waste wood, which has problems in being used in the manufacturing of woody cement boards.

• 한국산림과학회지
• /
• 제83권4호
• /
• pp.512-520
• /
• 1994

이 연구는 낙엽송 목재를 톱밥으로 만들어 표고버섯의 균상재배를 함으로써, 목재이용률을 높이고, 버섯을 효율적으로 재배할 수 있는 방법과 경제성을 조사한 것이다. 그 결과는 다음과 같다. 1. 낙엽송 톱밥을 이용한 표고재배에서 참나무톱밥재배와 비교하여 볼 때 균사발육이나 버섯품질에 차이가 없는 것으로 나타났다. 2. 낙엽송 톱밥재배는 종균접종후 6개월부터 제 1차기 버섯수확이 가능하면서 품질에 있어서도 각(各) 처리구간(處理區間)에 차이가 없는 것으로 나타났다. 3. 낙엽송재의 Lignin함유량은 28.7-28.6%이었으나 버섯재배 폐(廢)잔사는 18.2%로 감소되었다. 그러나 1% NaOH 추출성분은 낙엽송재의 것은 30.4-34.4%이었으나 표고재배 폐(廢)잔사의 것은 68.%로 증가하였다. 4. PP비닐대(袋) 1개(2500g입)당 표고버섯 총생산비율은 29.7-31.5%의 높은 값으로 나타나고, 이때 버섯생산량은 760-780g으로 그 순수익은 1,475원이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제14권3호
• /
• pp.43-46
• /
• 1986

A stainless steel autoclave reactor, which is the property of Pacific Northwest Laboratories(PNL) and located in PNL, was acted for pyrolysis and gasification of sawdust, ricestraw, and ricehusk. The initial reaction temperature of this reactor was 300$^{\circ}C$, and up to 500$^{\circ}C$ to complete pyrolysis and gasification reaction. The maximum exerted pressure on this reactor was 800 psig. In order to examine the effect of catalyst on reaction temperature, $K_2CO_3$, and nickel/alkali carbonate catalyst mixture were also used. The experimental results obtained with this reactor indicated that good yields of methane-rich gas(exceeding 40% methane) can be produced. The product gas mixtures were also identified to be CO. $CO_2$, $C_2H_4$, and $CH_3CHO$ etc. by Gas Chromatography and Mass Spectrometer.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.82-89
• /
• 2012

Purpose: The simulation model of a pneumatic conveying drying (PCD) for sawdust was developed and verified with the experiments. Method: The thermal behavior and mass transfer of a PCD were modeled and investigated by comparing the experimental results given by a reference (Kamei et al. 1952) to validate the model. Momentum, energy and mass balance, one dimensional first order ordinary differential equations, were coded and solved into Matlab V. 7.1.0 (2009). Results: The simulation results showed that the moisture content reduced from 194% to 40% (dry basis), air temperature decreased from $512^{\circ}C$ to $128^{\circ}C$ with the particle residence time of 0.7 seconds. The statistical indicators, root mean square error and R-squared, were calculated to be 0.079, and 0.998, respectively, between the measured and predicted values of moisture content. The relative error between the measured and predicted values of the final pressured drop, air temperature, and air velocity were only 8.96%, 0.39% and 1.05% respectively. Conclusions: The predicted moisture content, final temperature, and pressure drop values were in good agreement with the experimental results. The developed model can be used for design and estimation of PCD system for drying of wood dust particles.

• Carbon letters
• /
• 제8권3호
• /
• pp.199-206
• /
• 2007

The activated carbon produced from rubber wood sawdust by chemical activation using phosphoric acid have been utilized as an adsorbent for the removal of Cu(II) from aqueous solution in the concentration range 5-40 mg/l. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial copper ion concentration, carbon dosage, and pH on percentage removal have been studied. Adsorption results obtained for activated carbon from rubber wood sawdust were compared with the results of commercial activated carbon (CAC). The adsorption on activated carbon samples increased with contact time and attained maximum value at 3 h for CAC and 4 h for PAC. The adsorption results show that the copper uptake increased with increasing pH, the optimum efficiency being attained at pH 6. The precipitation of copper hydroxide occurred when pH of the adsorbate solution was greater than 6. The equilibrium data were fitted using Langmuir and Freundlich adsorption isotherm equation. The kinetics of sorption of the copper ion has been analyzed by two kinetic models, namely, the pseudo first order and pseudo second order kinetic model. The adsorption constants and rate constants for the models have been determined. The process follows pseudo second order kinetics and the results indicated that the Langmuir model gave a better fit to the experimental data than the Freundlich model. It was concluded that activated carbon produced using phosphoric acid has higher adsorption capacity when compared to CAC.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of Forest and Environmental Science
• /
• 제37권1호
• /
• pp.79-89
• /
• 2021

Cement bonded boards of 10 mm in thickness were produced from the mixture of Gmelina arborea sawdust and corn cob particles. The strength and dimensional stability of cement bonded composites produced from these two mixtures were examined. A total of thirty experimental boards were produced at density level of 1,000 kg/㎥ with cement to fibre ratio of 2.5:1 and 3:1 and five (5) blending proportions of G. arborea sawdust to corn cob particles of 100:0; 75:25; 50:50; 25:75 and 100:0. The effect of the cement to fibre ratio and blending proportion on the Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR), and Modulus of Elasticity (MOE) were determined. The result indicates that as the mixing ratio of cement to fibre and blending proportion of maize cob (75%) to G. arborea (25%) increased, the thickness swelling, water absorption decreased, whereas the MOR and MOE increased. It also shows that most dimensionally stable and flexural strength boards were produced at the highest level of mixing ratios (3:1) and blending proportion of G. arborea to corn cob 25:75. However, the analysis of variance shows that TS and WA were significantly different, whereas, MOE and MOR were not significantly affected by mixing ratios and blending proportions. Finding of this study has shown that maize cob particles are suitable for cement bonded board production.

• 한국균학회지
• /
• 제37권1호
• /
• pp.65-72
• /
• 2009

톱밥배지에 적합한 품종 구비 조건으로서 요구되는 신규성, 구별성, 균일성, 안정성에 대해 교잡균주제조에 따른 균사생장, 배양일수, 생산성, 온도형 등을 비교하여 톱밥배지에 적합한 균주육종을 시도하였다. 본 실험에서는 Di-mon교배법을 이용하여 이핵 균주 21개와 일핵 균주 2개 사이의 상호교배에서 19개의 새로운 균주를 만들었다. 이 가운데 균사생장과 목재 부후력이 활발한 10개 균주를 선발하였다. 이 선발된 균주들은 100일, 125일, 150일 등으로 배양일수를 달리하여 생산성 검정을 하였다. 그 결과 100일 처리에서 KFRI 960, 961, 962, 963, 964, 971, 973균주가 생산성이 우수하였으며, 125일 처리에서 KFRI 968, 970균주가 생산성이 우수하였다. 배양일수에 따른 생산성은 100일과 150일 처리사이에서 차이가 났다. 교배 온도형의 비교는 고온성 사이의 교배와 저온성과 고온성 사이의 교배, 아직 결정되지 않은 온도형과 고온성 간의 교배의 생산성차이는 없었으며, 중온성과 고온성과의 교배로 만들어진 균주들과는 생산성 차이가 났다. 교잡균주들의 온도형 분석은 고온성 균주가 다른 온도형에 비해 우성형질을 가졌다.