• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.129-143
• /
• 2006

This study is to review the printed cotton textile industry of Europe in 17th-l8th century, and specially investigate the development of the Toile do Jouy, printed French fabrics around the 18th century. Generally, the Toile de Jouy has two different meanings. The first meaning is the popular printed cotton textiles producted by wood block printing, copper plate printing and roller printing techniques at Jouy on Joas factory in France, around 18th century. The second meaning is the monochromatic upholstery fabrics printed by copper plate. Actually, this monochromatic printed textiles were the most popular printed cotton fabrics with large scale scenic designs with people, trees, birds, buildings, mythical heroes, protagonists of novel and country scenes of shepherds, sheep and other animals manufactured by Jouy on Joas factory. Main issue of this paper is to propose features of pattern, color and classify types of patterns expressed on the Toile de Jouy fabrics according to printing techniques such as wood block printing, copper plate printing and copper roller printing. And this study is also to analyze on origins of the variety of names called the printed cotton textiles in those days. The results of this study can help to understand the knowledge of printed cotton textiles in Europe and be effectively applied to develop printed fabric design in the textile industry.

• Conservation Science in Museum
• /
• v.2
• /
• pp.27-34
• /
• 2000

24 wooden objects excavated from Daho-ri were identified into 8 categories such as Quercus spp. (37.7%), Castanea crenata (8.3%), Prunus (8.3%), Ilex (4.1%), Alnus spp. (25%), Prunus spp. (4.1%), Zelkova serrata (4.1%) and Fraxinuse (8.3%). Physical properties of the above high water content, high contraction rate and significant density reduction. As for degradation pattern, observation with polarizing microscope showed significant decrease of double reflection phenomenon in most of the excavated objects excluding vessel compared to other kinds of objects, and observation with SEM showed remarkable degradation of organization structure including the 2nd cell wall of wood. Reagent can be easily penetrated and diffused into the objects with high degradation rate, so it's beneficial to treat them with polymers such as PEG#4000(MW:3,350), but in order to prevent contraction and change in shape, high concentration of Reagent is required in treatment to hold wood organization structure.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.73-80
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish coatings, this study was carried out to separate and determine some main coloring components of the exudates of D. morbifera and its traditionally refined golden varnishes using a process of solvent extractions, chromatographies and spectrometries. The results obtained are as follows: 1. The exudate and its traditional-refined golden varnishes appear to have a kind of natural polyacetylenes because it has some triple bond peaks in FT-IR spectrometry. 2. Some yellowing spots of the polar-solvent extrats from the exudates and refined varnishes separated on TLC appeared under natural drying condition, but those of non-polar solvent extract such as hexane did not. 3. A traditional refining method for reconstructing a Korea golden varnishes was thought to be better than solvent separation because the former had higher triple-bond peaks than the latter in FT-IR spectrometry. 4. One of main conponents in the hexane-extracts of the traditional-refined varnishes and the exudates had the same molcular weighr of 204, but the fragmentation patterns was a little different between the exudate and the refined. in LC-MS soectrometry.

• Korean journal of applied entomology
• /
• v.59 no.2
• /
• pp.83-91
• /
• 2020

We assessed efficacy of spraying pesticides from an unmanned helicopter to control two insect species, Monochamus alternatus and M. saltuarius, which are vectors of pine wood nematodes. Control efficacy of thiacloprid FL (33×), acetamiprid ME (33×), and flupyradifurone SL (33×) was determined by placing caged insects in the canopy of pine trees (Pinus sp). Water-sensitive paper was used to record the spray pattern of pesticide droplets and the degree of coverage; furthermore, we investigated peripheral scattering due to spraying. The three pesticides showed > 96% control efficacy against the targeted vectors, and pesticide droplet spray patterns were similar. Peripheral scattering was observed up to 20 m in front and 10 m to the left, right, and behind the targeted area. The coverage index of all the directions at 5 and 10 m distance was 6-7 and 2, respectively.

• Conservation Science in Museum
• /
• v.18
• /
• pp.19-34
• /
• 2017

Analysis of the species of wood in the wooden materials and the chemical composition of the fabric of the clothing excavated from the tomb of Yi Jing (1580-1642) has determined that the wooden materials, including the coffin (內棺, naegwan), burial chamber(外棺, oegwan), chilseongpan(七星板, bottom-lining board), and fan-shaped slats were made of pine(Pinus densiflora). The analysis of the fabrics suggested that the cloth attached to the fan-shaped slats, the funeral banner with inscriptions, and the five pouches for the corpse (五囊, onang) were all made of silk. The jacket was made of plain-weave cotton, while the inner and outer cloth of the socks were made of cotton and hemp, respectively. Among the silk items, the pouches for the left and right feet (constituting the five pouches for the corpse) were made from a satin-weave figured silk, while the other silk items were made of ju(紬), or plain-weave silk fabric. Infrared analysis revealed that the fan-shaped slats were decorated with cloud patterns across the entire surface, while the funeral banner and the five pouches for the corpse bore ink inscriptions.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.75-84
• /
• 2002

In order to find out impact insulation properties, various types of current radiant floor heating systems and light-framed floors that are used in light-framed residential buildings were evaluated for two types of impact sources at the same time. Sound Pressure Level (SPL) was different from each impact sources for those spectrum patterns and peaks. In case of light-framed floor framework, the excitation position and the assumed effective vibrating area have effects on sound pressure level but it is not considerable, and Normalized SPL was reduced for each frequency by increasing the bending rigidity of joist. The mortar layer in the radiant heating system had relatively high density and high impedance, therefore, it distributed much of the impact power when it was excited, and reduced the Normalized SPL considerably. Nevertheless, Increasing a thickness of mortar layer had little influence on SPL. Ceiling components reduced the sound pressure level about 5~25 dB for each frequency. Namely, it had excellent sound insulation properties in a range from 200 to 4,000 Hz frequency for both heavy and lightweight impact sources. Also, there was a somewhat regular sound insulation pattern for each center frequency. The resilient channel reduced the SPL about 2~11 dB, irrelevant to impact source. Consequently, current radiant floor heating systems which were established in light-framed residential buildings have quite good impact sound insulation properties for both impact sources.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.88-95
• /
• 1982

In order to investigate the physical properties of pine wood (Pinus desiflora S. et Z.) grown in Gangweondo this study has been carried out. The properties studied are percentage of latewood portion occupied in each cross section, specific gravity, crushing strength and relationships between them, respectively. The results summarized are as follows: As far as percentage of latewood portion and specific gravity are concerned, no differences between heartwood and sapwood have been seen, however, the crushing strength of the sapwood has shown larger value than that of the heartwood. 2. Width of annual ring have a defined effect on percentage of latewood and crushing strength, but specific gravity is not influenced significantly by width of annual ring. Percentage of latewood and crushing strength increased with decreasing width of annual ring (Tables 2 & 3). 3. Linear relationships between specific gravity and percentage of latewood, crushing strength and percentage of latewood, crushing strength and specific gravity for both heartwood and sapwood of pine have respectively been seen. Furthermore heartwood and sapwood have shown different patterns of variation as the following equations and Figures 1,2 and 3.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Korean Journal of Pharmacognosy
• /
• v.24 no.2
• /
• pp.116-123
• /
• 1993

The genus Ganoderma is typical wood-rotting fungi and its fruiting body has been used as an important herb in oriental medicine. Recent research discovered antitumor components from Ganoderma lncidum. Various Ganoderma species are being cultivated in Korea. However, taxonomic system of the genus Ganoderma has been based mainly on the macromorphology of fruiting bodies and the ultrastructural characteristics of basidiospores. Since there are similar characteristics in Ganoderma mycelia grown on the same artificial media, it is suggested that the compatibility of the fungi by di-mon mating be used as an aid to determine the identity of species in addition to the conventional characterization. In this study, we examined physiological and genetical properties such as growth temperature, pH, compatibility and enzyme or protein patterns of laccase, esterase and cellular proteins of G. lucidum RZ, G. tsugae and Ganoderma species cultivated in Korea by electrophoresis for characterization of the isolates. We found that compatibility test and isozyme patterns of laccase and esterase of the mycelia could be used for the differentiation of the isolates. These results showed that Ganoderma species cultivated in Korea is genetically similar to G. lucidum but physiologically closer to G. tsugae than to G. lucidum.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.91-99
• /
• 2010

There is a commonality between Frank Lloyd Wright and Charles Rennie Mackintosh in that they created the new patterns of geometric Art Nouveau from the late 19th and early 20th centuries. This study compares the furniture of Wright and Mackintosh who had significant impacts on the development of modern design for each of the periods divided by their design feature to find the individualities and similarities of their design. It is an analytical approach with an accurate understanding of the design trends of the Art Nouveau era. The results of the furniture comparison are as follows: The finding is that Wright and Mackintosh designed creative furniture in harmony with a specific indoor space, Organic design was well expressed through the selection and use of wooden materials, Based on the understanding of tree characteristics, they did not use detailed decorations, but designed the simple and rigorous forms of furniture with highlighted interest in geometry. As for shape, Wright's furniture in his early days tend to be look largely formal and heavy. Since his debut in Japan in 1905, the furniture design became very sophisticated. On the other hand, Mackintosh's chairs are characterized by plenty of geometric patterns and long back. In many cases, his chairs were designed as part of formative elements in space, not for the purpose of furniture itself. As for materials and colors, Wright used mainly cherry wood. And he also utilized metals colored in olive green, red-brown and others for office furniture. The frames, fabrics and leather used for most of the furniture have natural colors, which are harmonious with spaces. Meantime, Mackintosh used primarily oak and ash trees. He used seat cushions and various colors to make the design of furniture have a sophisticated and simple image. The materials used for seat panel are horsehair, rush, silk and leather. He applied these materials to the furniture by weaving or cutting them.