• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.285-292
• /
• 2020

Ancient cultural heritage made up of wood and organic fibers have been easily disintegrated or decomposed by various microorganisms like bacteria and fungi. Here, we demonstrate the effectiveness of an atmospheric pressure plasma jet (APPJ) system to sterilize the microorganisms in tangible cultural heritage. We collected several specimens from the surface of ancient documents and wooden artifacts. Finally, two bacteria and two fungi were prepared and sterilized using the APPJ treatment. The APPJ system is beneficial to its simple apparatus, quick operation time, and cost-effectiveness. Bacteria were almost sterilized within only 1 min treatment using 15 % O2 and applied bias voltage of 100 V. In case of the fungi, sterilization rate reached over 83 % but difficult to reach over 90 % even 10 min treatment. According to the plasma diagnostics using optical emission spectroscopy, it was found that the reactive oxygen species such as OH groups are critical for sterilization of microorganisms. Although further efforts should be performed, we believe that efficient sterilization could be realized by the simple, quick, and portable APPJ treatment system.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.616-642
• /
• 2021

Improving public awareness of wood is essential for achieving the goal of establishing wood culture by expanding the use of wood. This study presents a basic examination of the strategy of revitalizing wood culture and a survey of its current status and requirements. The survey was divided into seven categories: awareness of wood culture; use characteristics of wood culture; preference and demand for wood culture; awareness of sub-fields of wood culture; awareness of the cultural resources of wood; trends of wood utilization; and wood-related living environment. Based on the survey results, the study analyzed four items: awareness of wood and cultural experience; awareness of the cultural resources of wood; wood-related living environment and trends of wood utilization; and preference and demand for wood culture. In this study, the public awareness of wood and cultural experiences, the first of four items, was analyzed using the survey results. Generally, wood and wood culture are viewed as materials and a cultural heritage, respectively. Moreover, wood is ecofriendly. However, no substantial difference was observed between the two perceptions. Forty-five percent of the respondents reported that using wood exerts a positive effect on the body and mind. However, such use also destroys forests. Additionally, the recognition of wood-related workers, such as engineers or skilled workers, was relatively low compared with educators, such as wood education experts. Moreover, less than 50% of the respondents answered that major projects related to wood culture are well-known, whereas 30% participated in wood education, such as woodworking experience, where the majority required hand tools. Furniture, wooden accessories, and wooden buildings were among the objects that individuals intended to make through the wood culture program. Approximately 23% of the respondents were aware about the wood culture experience center, while approximately 50% had visited it. The response rate to woodworking technology was 73%, where the highest response was found for wood education experts. To improve public awareness about wood, the importance of entertainment factors over educational factors should be considered in the experience of individuals. To provide opportunities to experience wood culture for more individuals, developing and actively promoting various contents, including entertainment elements, are necessary.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.206-219
• /
• 2021

The warming of the climate is increasing the damage caused by termites to wooden buildings, cultural properties and houses. A group removal system can be installed around the building to detect and remove termite damage; however, if the site is not visited regularly, every one to two months, you cannot observe whether termites have spread within, and it is difficult to take prompt effective action. In addition, since the system is installed and operated in an exposed state for a long period of time, it may be ineffective or damaged, resulting in a loss of function. Furthermore if the system is installed near a cultural site, it may affect the aesthetic environment of the site. In this study, we created a detection system that uses wood, cellulose, magnets, and magnetic sensors to determine whether termites have entered the area. The data was then transferred to a low power LoRa Network which displayed the results without the necessity of visiting the site. The wood was made in the shape of a pile, and holes were made from the top to the bottom to make it easier for termites to enter and produce a cellulose sample. The cellulose sample was made in a cylindrical shape with a magnet wrapped in cellulose and inserted into the top of a hole in the wood. Then, the upper part of the wood pile was covered with a stopper to prevent foreign matter from entering. It also served to block external factors such as light and rainfall, and to create an environment where termites could add cellulose samples. When the cellulose was added by the termites, a space was created around the magnet, causing the magnet to either fall or tilt. The magnetic sensor inside the stopper was fixed on the top of the cellulose sample and measured the change in the distance between the magnet and the sensor according to the movement of the magnet. In outdoor experiments, 11 cellulose samples were inserted into the wood detection system and the termite inflow was confirmed through the movement of the magnet without visiting the site within 5 to 17 days. When making further improvements to the function and operation of the system it in the future, it is possible to confirm that termites have invaded without visiting the site. Then it is also possible to reduce damage and fruiting due to product exposure, and which would improve the condition and appearance of cultural properties.

• 보존과학연구
• /
• s.15
• /
• pp.104-127
• /
• 1994

Traditional architecture has structural limits after some terms because it almost made by wood elements. So in the name of 'Restoration', by anatural process, repair works are accomplished. But the repair works of traditional buildings have some problems in spite of best men power and technology. To overcome this problems, we need more detailed studies for examine the reasons of destruction in elements of wooden buildings. The life limits of wooden buildings are caused by natural circumstances and humanic circumstances, the former has bad effect on the damage in wooden buildings. There are various elements of damage in the wooden buildings, earthquake, the falling of a thunderbolt, fire, and rain, microorganism, insect, and so on. Moreover pollutions-sulfurous acid gas, acidorganic matters -are important reason of shortening the life of wooden buildings. From 1981 till now we investigated important traditional buildings under repair works by the way scientific analysis to catch the sample - seramics, woods, insects, metals, etc. In this reports we suggest various method of investigation with two samples of tradional house made by wood, one is Kim Joo Tea House, the order is Simgum-dang of Magok-Sa(dwelling of monk).

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.896-906
• /
• 2020

Wood deterioration experiments were carried out for 6 months in an intertidal zone of South Korea to monitor the changes in the chemical properties of two types of species, Korean red pine and sawtooth oak. The results of FT-IR spectra and XRD patterns have shown that the chemical properties of the wood did not change significantly during the 6-month burial period. However, the brightness of the surface decreased after burial; the value of the sawtooth oak sample was lower than that of the Korean red pine sample owing to an accumulation of inorganic compounds in cell lumen as observed by ICP analysis. Among the inorganic compounds, sodium and sulfur concentrations increased significantly over the burial period compared with the control. Further, the maximum moisture content decreased from 199% to 136% in the Korean red pine and 62% to 60% for the sawtooth oak. Nevertheless, the major chemical composition of both the wood species did not change significantly during the 6-month burial period, whereas, the crystallinity decreased with an increasing burial period owing to an accumulation of inorganic compounds in the lumen.

• 보존과학연구
• /
• s.29
• /
• pp.45-64
• /
• 2008

'No-An-Dang' in 'Un-Hyeun palace' was using as a guesthouse by 'dea-won-goon' built in 1864. 'No-An-Dang tablet' exhibited in 'No-An-Dang' seems to be made by using the letters which were written by 'Choo-sa Kim Jeong-Hee'. This tablet was manufactured by special processes; wood frame which was made of a Korean white pine was drawn patterns by variety pigment and latticed inside are joined with 3 of horizontal square wooden sticks and 7 of vertical square wooden sticks, then several sheets of the paper mulberry put on this frame and sheets cut along the edge of letter attached lastly. This structure of tablet could cause more conservation problems than only made in wooden structures. Therefore, replica was made and exhibited in bad condition and original one kept in museum storage for effective conservation of artefacts.

• 보존과학연구
• /
• s.19
• /
• pp.179-191
• /
• 1998

The Dumu of casted iron objects which is the big vessel for the prevention of fire to wood building is conserved in Kyongpok Palace(Dumu sizes：diameter 97cm, height 42cm, thickness 2cm, weight 250kg). The treated objects which some parts were lost, were not corroded, but cracted and broken by an external power, and strongly attached an cement layer on inside surface. First of all cement layer was mechanically removed by pneumatic needle scaler, welded to electric method for broken and cracked pieces, and then the lost sections were restored to use a epoxy resin and glass fiber. In order to prevent a damage during the handling, the restoration section of the inside surface was treated different colour in comparison with original part.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.171-181
• /
• 2012

The demand characteristics of the conventional 12 kinds of epoxy resins which have been used for restoration of the ceramic relics were investigated to provide standards of the effective materials in this study. The result of durability analysis showed that a liquid type is more effective in ceramic relics (low damage, high strength), and a paste type is more effective in earthenware relics (high damage, low strength). The result of workability analysis appears that the liquid type is higher than the paste type, and a slow curing type is higher than a fast curing type in surface hardness. Therefore, in the case of the liquid type which is hard to reprocess due to high surface hardness, it is necessary to conduct a study on improving physical properties by adding filler. The result of the gloss analysis on epoxy resins showed that the liquid type (colorless) has higher gloss than the paste type, and the slow curing type has higher gloss than the fast curing type in liquid types. CDK-520A/520B and Araldite SV 427-2/HV 427-1 showed the most similar gloss to $700^{\circ}C$ earthenware, Devcon 5 minute, EPO-TEK 301-2, and Quik Wood showed the most similar gloss to celadon and whiteware, Quik Wood, EPO-TEK 301-2, and Devcon 5 minute showed the most similar gloss to buncheongware. It is necessary for conservator to decide the range of the restoration surface by predicting the increase and decrease of the restoration surface because most of the epoxy resins caused the volume change in curing process.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.78-89
• /
• 2021

Organic residues analysis is an analysis method that reveals the types of organic material samples by using the characteristic that main components constituting substances are different depending on the species of animals and plants. In this study, scientific analysis of the organic residues attached to wood coffins in the Joseon Dynasty Hoemyo excavated from the site of Singok-dong, Uijeongbu was used to identify the types of remnants and to use them as information to restore the uses of organic materials and the way they lived in the past. As a result of FT-IR analysis of the residue attached to the inside of the wood, it was estimated to be a natural plant resin material. In addition, as a result of analysis by GC-MS to confirm the characteristic factors of natural resins, diterpenoids (abietane) and pimaran (pimarane), such as dehydroabietic acid and pimaric acid (diterpenoid) compounds, and saturated and unsaturated fatty acid components were detected together. Diterpenoid compounds are components mainly found in Pinaceae resins. It is confirmed in the literature that rosin, a representative material of Pinaceae resin, was used as an adhesive material. Considering the situation where an organic material remained at the joint of the wood, the organic material attached to the wood is judged to be an adhesive material made of Pinaceae resin. In addition, the fatty acid component detected together is a component derived from plant oil, and it is presumed to be made by mixing rosin and oil as recorded in previous studies. This study confirms that organic residues remain in the burial environment without losing their characteristics. It is expected that scientific analysis of organic residues will be conducted in the future to accumulate information necessary for the interpretation of past living culture.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.517-524
• /
• 2018

This study using a method different from those employed previously, the anatomical characteristics of paper-mulberry wood were confirmed by observing three different sections. In addition, the factors affecting the pulp and papermaking processes were analyzed in terms of morphological properties such as the fiber length and width, lumen width, and chemical composition of the paper-mulberry bast fiber. The anatomical characteristics of the paper-mulberry wood were a ring porous or semi-ring porous structure with the vessels showing solitary pore and radial array. The medullary ray of the tangential section showed 1-3 rows and common helical thickening. Consequently, the paper-mulberry wood has the same anatomical characteristics throughout. The morphological characteristics of the paper-mulberry bast fiber are a fiber length of 6.58 to 9.01 mm, fiber width of 15.85 to $27.80{\mu}m$, lumen width of 4.50 to $12.54{\mu}m$. The D sample of Gangwon was the most suitable for the pulp and papermaking processes, in terms of its derived morphological ratios. Comparing the chemical compositions, the C sample of Gyeongsang had a high holocellulose content (90%). Thus, the findings herein will aid in determining the quality of Korean paper post production.