• 농업과학연구
• /
• 제37권2호
• /
• pp.267-270
• /
• 2010

This study was carried out to manufacture black charcoal board from domestic wood waste by using serum protein adhesive which is natural, environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis. The particle size of charcoal from domestic wood waste for this study was #6-60. Hot pressing schedule was $170^{\circ}C$ and 40kgf/$cm^2$ (1 min)-10kgf/$cm^2$ (2.5 min)-40kgf/$cm^2$ (5 min). The black charcoal board made by the addition of 13% serum protein adhesive on dry weight basis gave 41.76kgf/$cm^2$ of bending strength, 8.12kgf/$cm^2$ of internal bonding strength, and excellent gas adsorption and workability.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.21-28
• /
• 2006

본 연구는 목탄의 모양과 탄화된 수종의 종류에 따른 토양개량 효과를 시험하기 위해 수행되었다. 결과에 따르면 서양측백과 칠엽수 묘목 모두 무처리 토양에서보다 목탄 처리 토양에서 더 잘 자랐다. 분말탄의 경우, 서양측백나무 묘목 생장은 잣나무 목탄으로 처리된 토양에서 가장 좋았으며 낙엽송, 파티클보드, 상수리나무 목탄 순으로 컸다. 입상탄의 경우 묘목 생장은 낙엽송, 파티클보드, 잣나무 목탄의 순으로 컸다. 또한 토양공극과 유기물 함량도 무처리 토양에서보다 목탄 처리 토양에서 더 큰 것으로 분석되었다. 목탄 처리 토양에서 묘목생장이 더 좋았던 것은 근계에서의 통기성과 유기물 흡착이 증가되었기 때문인 것으로 추정된다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.64-76
• /
• 2013

이 연구에서는 녹차-목재섬유 복합보드의 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여, 목재섬유에 녹차와 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 정역학적 성능에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 휨 강도성능은 백탄함유 복합보드에서 평균적으로 가장 높은 값을 나타내었으나, 숯의 종류에 따른 휨 강도성능의 차이는 크지 않았다. 그러나 그 값은 선행연구의 녹차-목재섬유 복합보드보다 현저한 휨 강도성능의 향상을 나타내었고, 녹차와 숯의 배합비율이 증가할수록 휨 강도성능의 감소가 확인되었다. 바인더로 사용된 요소수지의 종류에 따른 차이는 $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 휨 강도성능을 나타냈지만, 양 수지간의 차이는 선행연구의 녹차-목재섬유 복합보드에 비해 현저히 감소하였다. 복합보드의 박리강도는 백탄 $$\geq_-$$ 활성탄 > 흑탄함유 복합보드의 순이었고, 백탄함유 복합보드에서는 목재섬유로만 구성된 대조보드와 거의 비슷한 값을 나타내는 것이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.772-786
• /
• 2017

This study investigated the characteristics of wood tar, produced as a byproduct during the production of charcoal using oak wood by the modified traditional kiln and mechanical steel kiln. The wood tar was analyzed with a number of techniques, including Py-GC/MS, NMR, MALDI-TOF, FT-IR, TG and DSC. The Py-GC/MS analysis indicated that modified traditional kiln generated a higher hydrocarbon ratio in the wood tar than that of mechanical steel kiln. On the other hand, mechanical steel kiln resulted in a higher proportion of phenolic and aromatic hydrocarbon components than that of modified traditional kiln. Those results were also confirmed by NMR analysis. The MALDI-TOF analysis suggested that the wood tar produced in the mechanical steel kiln had a slightly higher molecular weight than the wood tar produced in the modified traditional kiln. In addition, the FT-IR analysis showed characteristic peak of symmetrical stretching vibration of $CH_3$ from the modified traditional kiln while characteristic peaks of the C-C and C-O stretching vibration were observed from the mechanical steel kiln. Moreover, TG and DSC analysis suggested that the mechanical steel kiln is more thermally stable than that of modified traditional kiln. Those findings clearly showed that the method of making charcoal greatly affects the properties of wood tar.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.49-56
• /
• 2006

This research was carried out to examine the FIR (far-infrared rays) emissivity and emission power of five types of flooring board by the mixing ratio of charcoal and loess, and the physical property of five types of injected flooring board by the amount of mixture. Type D was appeared the most high value of FIR emissivity and emission power. But there was a little difference among the five types of flooring board values. In physical properties, control type flooring board and injected flooring board showed a similar tendency. Among the domestic trees, all of hard wood seems to be used to surface wood for strong hardness flooring board. But a coniferous tree was not.

• 보존과학회지
• /
• 제5권1호
• /
• pp.87-93
• /
• 1996

This study was carried out to Identify wood and charcoal segments, which were excavated in 1994 at the Seohaean highway construction site along the western coast of Korea ; Tuntaeri, Hwasunggun. We identified the objects excavated at the fire places of the Tuntaeri dwelling sites (early Koryo period ; A. D. $11\~12C$) ; charcoal pieces and 1 wood segment, which was used for the handle of a metal hook. Chestnut(Castanea crenata), deciduous oaks(Quercus spp.) and maple(Acer app.) were identified from the charcoals, whereas the wood segment as willow species(Salix spp.). These species seem to represent warm and wet climate in the middlewest Korea during $11\~12C$.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.205-210
• /
• 2007

Particleboard(PB) is one of the most commonly used wood-based composite materials, which can be prepared by utilizing any kind of low grade wooden materials like waste wood which contains formaldehyde itself. Therefore, PB have been of considerable interest, in issues regarding the formaldehyde emission problems. Wood wastes are carbonized by the carbonization kiln at $800^{\circ}C$. Charcoal has been known as a formaldehyde adsorber. Thus, in this study, we fabricated PBs with carbonized waste particles cores, to examine the possibility of developing less formaldehyde emitting boards. The physical and mechanical properties were evaluated by Korean Standard (KS F 3104). The moisture content of PBs ranged from 6.76 to 8.36%. Internal bond strengths decreased with the increase in the content of carbonized core particles. Formaldehyde emission showed minimum value at 25% of carbonized core particles, but the emission values increased when the amount of carbonized cote particles increased. When 25% of carbonized core particles was used, PBs met KS F 3104 standard properties.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.86-92
• /
• 2004

본 연구는 백탄보드와 오버레이 백탄보드를 비포름알데히드계 수지 접착제를 사용하여 습식공법으로 제조하고, 백탄보드의 포장용 상자로서의 기능을 검토하기 위하여 에칠렌가스 흡착과 딸기의 보관성을 측정하였다. 그결과, 백탄보드의 에칠렌 가스 흡착성능은 종이보다 월등히 좋았고 백탄 자체보다 높았으며, 오버레이 백탄보드와 비오버레이 백탄보드간 가스흡착성능은 차이가 없었다. 종이상자와 PVC상자 내 딸기와 백탄보드상자 내 딸기의 잿빛곰팡이 발생시간을 비교한 결과, 각각 2일 후, 4일 후로 나타났으며 박엽지와 부직포 사이의 흡착성의 차이도 역시 없었고, 백탄보드의 보관성 효과가 약 2배 좋았다. 결과적으로 백탄보드의 종류(혼합형, #40-60형)나 박엽지와 부직포 오버레이 백탄보드간의 신선도 유지효과의 차이는 없었다.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.250-257
• /
• 2017

Background: Tasks involved in traditional charcoal production expose workers to various levels of charcoal dust and wood smoke. This study aimed to identify specific tasks influencing lung function and respiratory symptoms. Methods: Interviews, direct observation, and task/symptom checklists were used to collect data from 50 charcoal-production workers on 3 nonwork days followed by 11 workdays. The peak expiratory flow rate (PEFR) was measured four times per day. Results: The PEFR was reduced and the prevalence of respiratory symptoms increased over the first 6-7 workdays. The PEFR increased until evening on nonwork days but not on workdays. Loading the kiln and collecting charcoal from within the kiln markedly reduced the PEFR and increased the odds of respiratory symptoms. Conclusion: Tasks involving entry into the kiln were strongly associated with a short-term drop in the PEFR and the occurrence of respiratory symptoms, suggesting a need for the use of protective equipment and/or the operation of an effective kiln ventilation system.